Suggestions for the quantitative X-ray microanalysis of thin sections of frozen-dried and embedded biological tissues

When a microregion in a thin section of frozen-dried and embedded tissue is analysed by the conventional electron-probe X-ray continuum-normalization method, the measured quantity is in mmol of element per kg of embedded specimen. As each microregion contains an unknown amount of embedding medium, this quantity generally lies indeterminately somewhere within the wide range between mmol of element per kg of hydrated tissue and mmol of element per kg of dehydrated tissue. However, if a ‘tag’ element is incorporated in the embedding medium, the contribution of the medium to the local continuum count in each probed field should be measurable, and the X-ray data may then unambiguously yield mmol of element per kg of dehydrated tissue. This result should not be affected by shrinkage on freeze-drying or by incomplete replacement of water by embedding medium. The same X-ray data can additionally provide estimates of mmol of element per unit volume, mmol of element per kg of hydrated tissue and local dry-mass fraction. However, these estimates are subject to errors due to tissue shrinkage, incomplete replacement of water and beam damage.     

Epoxy paint failure in B-52 fuel tanks: Part II. Influence of DIEGME concentration in the fuel on the failure process

A model has been proposed to explain the failure of the original BMS10-39 epoxy paint on upper vertical surfaces in B-52 fuel tanks. The model involves interaction of the paint with DIEGME, a fuel system ice inhibitor (FSII) in jet fuel, that is distilled from the liquid fuel. In this communication, distillation experiments used to support the model are refined to better match the mass transfer of vapor from fuel in a B-52 fuel tank at close to room temperature. The interaction of these lower temperature distillates with the paint affirms the earlier model. On the basis of these experiments it is proposed that paint failure may be controlled or eliminated by reducing the level of DIEGME in the fuel. Proposed changes in military jet fuel composition are detailed.     

Results of a User Study on 2D Hurricane Visualization

We present the results from a user study looking at the ability of observers to mentally integrate wind direction and magnitude over a vector field. The data set chosen for the study is an MM5 (PSU/NCAR Mesoscale Model) simulation of Hurricane Lili over the Gulf of Mexico as it approaches the southeastern United States. Nine observers participated in the study. This study investigates the effect of layering on the observer's ability to determine the magnitude and direction of a vector field. We found a tendency for observers to underestimate the magnitude of the vectors and a counter‐clockwise bias when determining the average direction of a vector field. We completed an additional study with two observers to try to uncover the source of the counter‐clockwise bias. These results have direct implications to atmospheric scientists, but may also be able to be applied to other fields that use 2D vector fields.     

Probing stress effects in HfO2 gate stacks with time dependent measurements

Effects of constant voltage stress (CVS) on gate stacks consisting of an ALD HfO₂ dielectric with various interfacial layers were studied with time dependent sensing measurements: DC I–V, pulse I–V, and charge pumping (CP) at different frequencies. The process of injected electron trapping/de-trapping on pre-existing defects in the bulk of the high-κ film was found to constitute the major contribution to the time dependence of the threshold voltage (V_t) shift during stress. The trap generation observed with the low frequency CP measurements is suggested to occur within the interfacial oxide layer or the interfacial layer/high-κ interface, with only a minor effect on V_t.     

Performance of hashed cache data migration schemes on multicomputers

Many researchers approach the problem of programming distributed memory machines by assuming a global shared name space. Thus the user views the distributed memory of the machine as though it were shared. A major issue that arises at this point is how to manage the memory. When a processor accesses data stored on another processor's memory, data must be moved between the two processors. Once these data are retrieved from another processor's memory, several interesting issues are raised. Where should these data be stored locally? What transformations must be performed to the code to guarantee that the nonlocal accesses reference the correct memory location? What optimizations can be performed to reduce the time spent in accessing the nonlocal data? In this paper we examine various data migration mechanisms that allow an explicit and controlled mapping of data to memory. We describe, experimentally evaluate, and model a set of schemes for storing and retrieving off-processor array elements. The schemes are all based on using hash tables for efficient access of nonlocal data. The three different techniques evaluated are the basic hashed cache, partial enumeration, and full enumeration, the details of which are described in the paper. In all three schemes, nonlocal data are stored in hash tables—the difference is in the amount of memory used by the schemes and the retrieval mechanisms for nonlocal data.     

Plastic deformation and fracture of binary TiAl-base alloys

The mechanical behavior of binary TiAl alloys containing 46 to 60 at. pct Al has been studied in bulk materials preparedvia rapid solidification processing. Bending and tensile tests were carried out at room temperature as a function of Al concentration. A few alloys were also tested from liquid nitrogen temperature to ∼ 1000°C. Deformation substructures were studied by analytical transmission electron microscopy and fracture modes by scanning electron microscopy (SEM). It was found that both microstructure and composition strongly affect the mechanical behavior of TiAl-base alloys. A duplex structure, which contains both primary y grains and transformedγ/α ₂ lamellar grains, is more deformable than a single-phase or a fully transformed structure. The highest plasticities are observed in duplex alloys containing 48–50 at. pct Al after heat treatment in the center of theγ + α phase field. The deformation of these duplex alloys is facilitated by 1/2[110] slip and {111} twinning, but very limited superdislocation slip occurs. The twin deformation is suggested to result from a lowered stacking fault energy due to oxygen depletion or an intrinsic change in chemical bonding. Other factors, such as grain size and grain boundary chemistry and structure, are important from a fracture point of view. The results on the deformation and fracture modes as a function of test temperature are also discussed.     

Mentoring relationships of New Zealand nurses: an empirical study (Part 1)

A national, random, postal survey (n = 298) of mentoring behaviour among New Zealand nurses was undertaken. The initial research problem was to seek an explanation for the apparent lack of mentoring in New Zealand nursing. However, as the study evolved the lack of agreement concerning the definition of mentoring became a major research obstacle. A new conceptual framework of mentoring grounded in the work of Kathy Kram (1985) was devised. A quantitative global measure of mentoring behaviour (the TMS score) was used to measure levels of mentoring behaviour. This score was used as the dependent variable in subsequent statistical tests of: the definitional hypothesis-the study's validity check; the peer mentoring hypothesis which explored selected dynamics of mentor protégé relationships, and four allied research questions. The conceptual framework and approach are discussed in part one.     

Implementing software metrics — the critical success factors

This paper reviews the current state of industry with regard to the introduction of software metrics. It discusses the benefits that organizations have derived from metrication, it looks at why organizations have sought to introduce metrics programmes, how they have gone about introducing those programmes and the problems that they have encountered during implementation. The review found that, on the whole, only the sanitized aspects of metrics experiences have actually been published. This seems to be especially the case with respect to practitioner resistance. Very few organizations admit to having encountered resistance during the introduction of a metrics programme. The paper also includes the results of a pilot study, conducted by the first author, which examines the attitudes that developers hold towards the introduction of software metrics. The key findings of this pilot study are that positive attitudes to metrics correlate highly with levels of education and to job satisfaction.