Low-temperature properties of styrene–butadiene–styrene polymer modified bitumens

Low-temperature properties of the modified bitumens containing styrene–butadiene–styrene (SBS) polymers were investigated using conventional methods, dynamic mechanical analysis (DMA) and bending beam rheometer (BBR). Effects of the characteristics of base bitumens and polymers and the proportion of the components on these properties were studied. The results indicated that SBS polymers improved low-temperature properties of bitumens. The degree of improvement generally increased with SBS content and were influenced slightly by SBS structure. The study also showed a statistically linear relationships between different low-temperature parameters.     

Modeling the flow behavior of a medium carbon microalloyed steel under hot working conditions

The constitutive equations for the flow behavior of a commercial 0.34 pct C-1.5 pct Mn-0.7 pct Si-0.083 pct V-0.018 pct Ti microalloyed steel were determined. For this purpose, uniaxial hot compression tests were carried out over a wide range of strain rates (10⁻⁴ to 10 s⁻¹) and temperatures (1123 to 1423 K). In combination with models developed in the literature, the experimental results permit the flow stress of the present steel to be predicted within ± 5 pct. It is shown that the classical constitutive equations must be modified to take the grain size into account, particularly when the latter is below 30 μm.     

Liquid and vapor phase silanes coating for the release of thin film MEMS

Stiction remains one of the biggest reliability problems in the fabrication of microelectromechanical systems (MEMS). This work investigates the techniques adapted to release thin-film devices (100 nm thick) and submicron gaps MEMS. First, a CMOS compatible wet release process was developed, using nonchlorinated silanes coating providing a high hydrophobicity (contact angle in the range of 110/spl deg/). Second, a vapor phase release process based on the same chemistry is shown to be adequate to release thin-film beams from a silicon-on-insulator wafer, where the wet process failed. This is to the authors' knowledge the first time that an in-use stiction-free release process has been demonstrated for such thin structures. The layers resist up to 300/spl deg/C without damage and X-ray reflectivity confirmed that homogeneous monolayers were obtained.     

Combined Mutagenesis and Kinetics Characterization of the Bilin‐Binding GAF Domain of the Protein Slr1393 from the Cyanobacterium Synechocystis PCC6803

The gene slr1393 from Synechocystis sp. PCC6803 encodes a protein composed of three GAF domains, a PAS domain, and a histidine kinase domain. GAF3 is the sole domain able to bind phycocyanobilin (PCB) as chromophore and to accomplish photochemistry: switching between a red‐absorbing parental and a green‐absorbing photoproduct state (λ_max=649 and 536 nm, respectively). Conversions in both directions were followed by time‐resolved absorption spectroscopy with the separately expressed GAF3 domain of Slr1393. Global fit analysis of the recorded absorbance changes yielded three lifetimes (3.2 μs, 390 μs, and 1.5 ms) for the red‐to‐green conversion, and 1.2 μs, 340 μs, and 1 ms for the green‐to‐red conversion. In addition to the wild‐type (WT) protein, 24 mutated proteins were studied spectroscopically. The design of these site‐directed mutations was based on sequence alignments with related proteins and by employing the crystal structure of AnPixJg2 (PDB ID: 3W2Z), a Slr1393 orthologous from Anabaena sp. PCC7120. The structure of AnPixJg2 was also used as template for model building, thus confirming the strong structural similarity between the proteins, and for identifying amino acids to target for mutagenesis. Only amino acids in close proximity to the chromophore were exchanged, as these were considered likely to have an impact on the spectral and dynamic properties. Three groups of mutants were found: some showed absorption features similar to the WT protein, a second group showed modified absorbance properties, and the third group had lost the ability to bind the chromophore. The most unexpected result was obtained for the exchange at residue 532 (N532Y). In vivo assembly yielded a red‐absorbing, WT‐like protein. Irradiation, however, not only converted it into the green‐absorbing form, but also produced a 660 nm, further‐red‐shifted absorbance band. This photoproduct was fully reversible to the parental form upon green light irradiation.     

Life cycle cost analysis of a car,a city bus and an intercity bus powertrain for year 2005 and 2020

The international economy, in the beginning of the 20th century, is characterized by uncertainty about the supply and the price of oil. Together with the fast decrease of electrical propulsion component prices, it becomes more and more cost effective to develop vehicles with alternative powertrains. This paper focuses on two questions: Are alternative powertrains especially cost effective for specific applications?; How does an increased fossil fuel price influences the choose of powertrain? To assess these questions, a computer tool named THEPS, developed in a Ph.D. project, is used. Three applications and three scenarios are analysed. The applications, a car, a city bus and an intercity bus, are vehicles all assumed to operate in Sweden. One scenario represents year 2005, the other two year 2020. The two future scenarios are characterized by different fossil fuel prices. The study, presented in the paper, indicates that alternative powertrains can be competitive from a cost perspective, in some applications, already in year 2005. It is for example cost effective to equip a city bus, running in countries with a high fuel price, with a hybrid powertrain. The study also indicates that pure electric, hybrid and/or fuel cell cars will probably be a more cost effective choice than conventional cars in year 2020. Another indication is that it will not be clear which powertrain concept to choose. The reason is that many cost effective powertrain concepts will be offered. The best choice will depend on the application.     

A multiplex ligation detection assay for the characterization of Salmonella enterica strains

A proof of principle of a multi-target assay for genotyping Salmonella has been developed targeting 62 genomic marker sequences of Salmonella related to pathogenicity. The assay is based on multiplex ligation detection reaction (LDR) followed by customized ArrayTube? microarray detection. The feasibility of the developed assay was verified in a method comparison study with conventional PCR using 16 Salmonella 'test' strains comprising eight serovars. Subsequently, the feasibility of the LDR microarray assay was also tested by analyzing 41 strains belonging to 23 serovars. With the exception of four serovars each serovar was characterized by a unique virulence associated gene repertoire. The LDR microarray platform proved to be a convenient, rapid and easy to use tool with potential in tracing a Salmonella contamination in the food chain, for outbreak studies, and to provide data for risk assessors that support bio-traceability models.