Flood Inundation Modelling for Mid‐Lower Brisbane Estuary

This study utilizes a two‐dimensional hydrodynamic model to calibrate and validate an inundation model for the Brisbane River estuary in Queensland, Australia. The bathymetry data used in the hydraulic model are derived from one arc second (1 s) shuttle radar topography mission digital elevation model, and the two‐dimensional hydraulic model is parameterized using the generated bathymetry with four open boundaries with water level observations and roughness coefficients. The calibration performance is evaluated by comparing the simulated results with the digitized records during the January 2013 flood event (a low magnitude event) at three gauging stations. The calibrated model is validated with water level data and available discharge data during the January 2011 flood (a large magnitude event) at four gauging stations located along the Brisbane River. Different performance indices are applied to demonstrate that the developed model performs well during calibration and validation. A sensitivity analysis is presented to assess the influence of riverbed elevation changes on the model because the main uncertainty of the model is the bathymetry data. The proposed model with the shuttle radar topography mission digital elevation model‐derived riverbed elevation for the Brisbane estuary is able to predict the flood inundation extent at an accuracy of 66.9% which is higher than or comparable with the accuracies of the existing studies. However, it is expected that the accuracy will increase if some improved bathymetry data become available in the future. Copyright © 2016 John Wiley & Sons, Ltd.     

Rubber‐toughened polypropylene nanocomposite: Effect of polyethylene octene copolymer on mechanical properties and phase morphology

Rubber‐toughened polypropylene (PP)/org‐Montmorillonite (org‐MMT) nanocomposite with polyethylene octene (POE) copolymer were compounded in a twin‐screw extruder at 230°C and injection‐molded. The POE used had 25 wt % 1‐octene content and the weight fraction of POE in the blend was varied in the range of 0–20 wt %. X‐ray diffraction analysis (XRD) revealed that an intercalation org‐MMT silicate layer structure was formed in rubber‐toughened polypropylene nanocomposites (RTPPNC). Izod impact measurements indicated that the addition of POE led to a significant improvement in the impact strength of the RTPPNC, from 6.2 kJ/m² in untoughened PP nanocomposites to 17.8 kJ/m² in RTPPNC containing 20 wt % POE. This shows that the POE elastomer was very effective in converting brittle PP nanocomposites into tough nanocomposites. However, the Young's modulus, tensile strength, flexural modulus, and flexural strength of the blends decreased with respect to the PP nanocomposites, as the weight fraction of POE was increased to 20 wt %. Scanning electron microscopy (SEM) was used for the investigation of the phase morphology and rubber particles size. SEM study revealed a two‐phase morphology where POE, as droplets was dispersed finely and uniformly in the PP matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3441–3450, 2006     

Physical characteristics of sweet potato pulp/polycaprolactone blends

Sweet potato pulp (SSP) obtained as a by‐product from starch extraction was blended with polycaprolactone (PCL) to prepare a biodegradable plastic material. In the blends, PCL was used as a reinforcing agent. The SPP/PCL blends were prepared by compression‐molding under high temperature and pressure, at different SPP/PCL ratios, and the mechanical properties of the molded specimens were tested. Matrix structure and thermal properties were measured by using a Fourier transform infrared (FTIR) spectrophotometer, scanning electron microscope (SEM), differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). Mechanical properties (tensile and flexural properties) were also measured to find the most suitable ratio in a SSP/PCL blend. During compression molding of the SPP/PCL blends under high pressure and temperature, chemical reaction occurred between SPP and PCL, and thus, thermal stability and mechanical strength of the blends increased and water uptake decreased. Also, by increasing the PCL content in the blend, the matrix in the blend became more homogeneous, and consequently, mechanical strength of the molded specimen increased. At 7/3 or 6/4 weight ratio of SSP/PCL, water uptake of the molded specimen became substantially less than that at 8/2. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 861–866, 2004     

Tactile display with tangential and normal skin displacement for robot-assisted surgery

This paper proposes a tactile display providing both shear and normal feedback to the fingertip for generating three-axis tactile feedback during teleoperation of a surgical robot. The display is composed of five balloons actuated by controlling the pneumatic pressure. The implemented display is 18?mm?×?18?mm?×?15?mm. This size is suitable for mounting the display onto the master controls of a surgical robot. The maximum normal and shear displacements are 2 and 1.3?mm, respectively. The proposed tactile display may provide perceivable stimuli to a human finger pad in all five directions: normal, distal, proximal, radial, and ulnar. This paper also reports on the results of psychophysical measurement of the minimum perceivable movement of the developed tactile display for each of the five directions.     

Structured population genetic algorithms: a literature survey

The Genetic Algorithm (GA) has been one of the most studied topics in evolutionary algorithm literature. Mimicking natural processes of inheritance, mutation, natural selection and genetic operators, GAs have been successful in solving various optimization problems. However, standard GA is often criticized as being too biased in candidate solutions due to genetic drift in search. As a result, GAs sometimes converge on premature solutions. In this paper, we survey the major advances in GA, particularly in relation to the class of structured population GAs, where better exploration and exploitation of the search space is accomplished by controlling interactions among individuals in the population pool. They can be classified as spatial segregation, spatial distance and heterogeneous population. Additionally, secondary factors such as aging, social behaviour, and so forth further guide and shape the reproduction process. Restricting randomness in reproduction has been seen to have positive effects on GAs. It is our hope that by reviewing the many existing algorithms, we shall see even better algorithms being developed.     

Surface reconstruction techniques: a review

Surface reconstruction means that retrieve the data by scanning an object using a device such as laser scanner and construct it using the computer to gain back the soft copy of data on that particular object. It is a reverse process and is very useful especially when that particular object original data is missing without doing any backup. Hence, by doing so, the data can be recollected and can be stored for future purposes. The type of data can be in the form of structure or unstructured points. The accuracy of the reconstructed result should be concerned because if the result is incorrect, hence it will not exactly same like the original shape of the object. Therefore, suitable methods should be chosen based on the data used. Soft computing methods also have been used in the reconstruction field. This papers highlights the previous researches and methods that has been used in the surface reconstruction field.     

Object Bank: An Object-Level Image Representation for High-Level Visual Recognition

It is a remarkable fact that images are related to objects constituting them. In this paper, we propose to represent images by using objects appearing in them. We introduce the novel concept of object bank (OB), a high-level image representation encoding object appearance and spatial location information in images. OB represents an image based on its response to a large number of pre-trained object detectors, or ‘object filters’, blind to the testing dataset and visual recognition task. Our OB representation demonstrates promising potential in high level image recognition tasks. It significantly outperforms traditional low level image representations in image classification on various benchmark image datasets by using simple, off-the-shelf classification algorithms such as linear SVM and logistic regression. In this paper, we analyze OB in detail, explaining our design choice of OB for achieving its best potential on different types of datasets. We demonstrate that object bank is a high level representation, from which we can easily discover semantic information of unknown images. We provide guidelines for effectively applying OB to high level image recognition tasks where it could be easily compressed for efficient computation in practice and is very robust to various classifiers.     

A memetic algorithm for the capacitated m-ring-star problem

The Capacitated m-Ring-Star Problem (CmRSP) models a network topology design problem in the telecommunications industry. In this paper, we propose to solve this problem using a memetic algorithm that includes a crossover operation, a mutation operation, a local search involving three neighborhood operators, and a population selection strategy that maintains population diversity. Our approach generates the best known solutions for 131 out of 138 benchmark instances, improving on the previous best solutions for 24 of them, and exhibits more advantages on large benchmark instances when compared with the best existing approach. Additionally, all existing algorithms for this problem in literature assume that the underlying graph of the problem instance satisfies the triangle inequality rule; our approach does not require this assumption. We also generated a new set of 36 larger test instances based on a digital data service network price structure to serve as a new benchmark data set for future researchers.     

Domain ontology graph model and its application in Chinese text classification

This paper proposes an ontology learning method which is used to generate a graphical ontology structure called ontology graph. The ontology graph defines the ontology and knowledge conceptualization model, and the ontology learning process defines the method of semiautomatic learning and generates ontology graphs from Chinese texts of different domains, the so-called domain ontology graph (DOG). Meanwhile, we also define two other ontological operations—document ontology graph generation and ontology graph-based text classification, which can be carried out with the generated DOG. This research focuses on Chinese text data, and furthermore, we conduct two experiments: the DOG generation and ontology graph-based text classification, with Chinese texts as the experimental data. The first experiment generates ten DOGs as the ontology graph instances to represent ten different domains of knowledge. The generated DOGs are then further used for the second experiment to provide performance evaluation. The ontology graph-based approach is able to achieve high text classification accuracy (with 92.3 % in f-measure) over other text classification approaches (such as 86.8 % in f-measure for tf–idf approach). The better performance in the comparative experiments reveals that the proposed ontology graph knowledge model, the ontology learning and generation process, and the ontological operations are feasible and effective.     

Modeling of rotational molding process: Multi‐layer slip‐flow model,phase‐change,and warpage

A new multilayer slip‐flow model has been developed to simplify and to overcome current numerical difficulties of two‐dimensional model in predicting the internal air temperature inside a mold during a rotational molding process. The proposed methodology considers a macroscopic “layer‐by‐layer” deposition of a heating polymer bed onto the inner mold surface. A semi‐implicit approach is introduced and applied to compute the complex thermal interactions between the internal air and its surroundings. In the model, the lumped‐parameter system and the coincident node technique are incorporated with the Galerkin finite element model to address the internal air and the deposition of molten polymer beds, respectively. The simple phase‐change algorithm has been proposed to improve the computational cost, numerical nonlinearity, and predicted results. The thermal aspects of the inherent warpage are explored to study its correlation to the weak apparent crystallization‐induced plateau in the temperature profile of the internal air, as in practice. The overall predicted results are in favor with the available experimental data for rotomolded parts of cross‐sectional thicknesses up to 12 mm. POLYM. ENG. SCI. 46:960–969, 2006. © 2006 Society of Plastics Engineers