Scalable Realistic Rendering with Many‐Light Methods

Recent years have seen increasing attention and significant progress in many‐light rendering, a class of methods for efficient computation of global illumination. The many‐light formulation offers a unified mathematical framework for the problem reducing the full lighting transport simulation to the calculation of the direct illumination from many virtual light sources. These methods are unrivaled in their scalability: they are able to produce plausible images in a fraction of a second but also converge to the full solution over time. In this state‐of‐the‐art report, we give an easy‐to‐follow, introductory tutorial of the many‐light theory; provide a comprehensive, unified survey of the topic with a comparison of the main algorithms; discuss limitations regarding materials and light transport phenomena and present a vision to motivate and guide future research. We will cover both the fundamental concepts as well as improvements, extensions and applications of many‐light rendering.     

Wetting properties of polystyrene ionomers treated with plasma source ion implantation

The wetting properties of polystyrene‐based ionomers treated with plasma source ion implantation (PSII) were investigated by the measurement of water contact angles. When sulfonated ionomers were aged for a few days, the hydrophobic recovery for the ionomers became much slower than that for the nonionic polymers. However, when the samples were aged over 20 days, the water contact angle of the ionomers converged with that of the nonionic polymer. Thus, it was concluded that the ionic interaction between the ionic groups and the presence of ionic groups together resulted in the slow hydrophobic recovery and that the aging effect was significant for the ionomers. For the methacrylate ionomer of low ion content, on the other hand, it was found that the PSII treatment produced only a small change in hydrophobic recovery behavior. Thus, it was suggested that the low ionic content coupled with the small size of the ionic unit might cause changes only of a very insignificant degree in hydrophobic recovery behavior. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2500–2504, 2002     

An analysis of muscles from ultrasound image using morphological information of fascia and thoracic vertebra

In this paper, we propose a new fully computerized image analysis method for measuring the thickness of muscles from ultrasound image obtained by muscle endurance test using morphological information of fascia and thoracic vertebra. Firstly, we divide the image into lumbar region and thoracolumbar region by the difference of density in image for measuring the thickness of muscles. In lumbar region, we notice that the intensity of fascia is relatively higher than other parts. Thus, we measure the thickness of muscles surrounding the fascia area. In the process, we apply median filter to candidate fascia areas for extracting candidate muscle layers between fascias. Then, the thickness of muscles we measure is that of the third layer. In thoracolumbar region, we apply region expansion method for classifying the region into subcutaneous fat part and part including thoracic vertebra. Then, we apply counting method and evolutionary computation search model to find the measuring location that is in between subcutaneous fat area and thoracic vertebra. In experiment, the proposed method is effective in measuring the thickness of muscles and avoids failures of previous studies. The performance of this approach is sufficiently comparable to that of medical experts.     

Synthesis and properties of acrylonitrile-CR-methyl methacrylate graft copolymer

Graft copolymerization of acrylonitrile (AN) and methyl methacrylate (MMA) onto polychloroprene (CR) was carried out using benzoyl peroxide as initiator. The effects of mole ratio of AN to MMA, reaction temperature, reaction time, solvent, and initiator concentration on the graft copolymerization were examined. It was found that the thermal stability and weatherability of the AN—CR—MMA graft copolymer (ACM) were considerably better than those of CR.     

Copolymerizations of ethylene with 1–decene over various ansa–metallocene complexes combined with Al( i-Bu) 3/ [CPh 3] [B(C 6F 5) 4] cocatalyst

Copolymerizations of ethylene with 1-decene were carried out with a series of stereospecific metallocene compounds, rac–(EBI)Zr(NMe₂)₂ [ 1, EBI = ethylene–1,2–bis( 1–indenyl)], rac–(EBI)Hf(NMe₂ (2), rac–Me₂Si( 1–C₅H₂–2–Me–4– ^t Bu)₂Zr(NMe₂)₂ (3), ethylidene(cyclopentadienyl)(9-fluorenyl)ZrMe2 [4, Et(Flu)(Cp)ZrMe2] and isopropylidene(cyclopentadienyl)(9–fluorenyl)ZrMe₂ [5, iPr(Flu)(Cp)ZrMe₂], combined with Al(i–Bu)₃/[CPh₃] [B(C₆F₅)₄] cocatalyst. All catalyst systems showed very high copolymerization rates and the 1–decene reactivity decreased in the order of 2 > 5 > 1 4 > 3. The reactivity product of ethylene and 1–decene (r _E x r _D) was below 1 except 3 catalyst, corresponding to random copolymer structures with an alternating character. The melting point (T_m), crystallinity (X_C), intrinsic viscosity ([] and density of the 1–decene/ethylene copolymers decreased markedly with an increase in the 1–decene content, regardless of the type of catalytic system.     

Syntheses and biological activities of polymers containing methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid or 5‐fluorouracil

A series of novel copolymers, poly(methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid‐co‐exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalic acid) [poly(MTCA‐co‐ETAc)], poly(methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid‐co‐hydrogenethyl‐exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalate) [poly(MTCA‐co‐HEET)], and poly(methacryloyl‐2‐oxy‐1,2,3‐propanetricarboxylic acid‐co‐α‐ethoxy‐exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthaloyl‐5‐fluorouracil) [poly(MTCA‐co‐EETFU)], were prepared from corresponding monomers by photopolymerizations at 25°C for 48 h. The polymers were identified by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopies. The number‐average molecular weights of the fractionated polymers determined by GPC were in the range from 9400 to 14,900 and polydispersity indices were 1.2–1.4. The in vitro IC₅₀ values of polymers against mouse mammary carcinoma (FM3A), mouse leukemia (P388), and human histiocytic lymphoma (U937) as cancer cell lines and mouse liver cells (AC2F) as a normal cell line were much higher compared to that of 5‐fluorouracil (5‐FU). The in vivo antitumor activities of monomers and polymers against mice bearing sarcoma 180 tumor cell line were better than those of 5‐FU. The inhibition of DNA replication and antiangiogenesis activities of MTCA and copolymers were better compared to those of 5‐FU. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 57–64, 2004     

Pb-Diffusion Barrier Layers for PbTiO3 Thin Films Deposited on Si Substrates by Metal Organic Chemical Vapor Deposition

The interfaces between metal organic chemical vapor deposited PbTiO₃ thin films and various diffusion barrier layers deposited on Si substrates were investigated by transmission electron microscopy. Several diffusion barrier thin films such as polycrystalline TiO₂, amorphous TiO₂, ZrO₂, and TiN were deposited between the PbTiO₃ thin film and Si substrate, because the deposition of PbTiO₃ thin films on bare Si substrates produced Pb silicate layers at the interface irrespective of the deposition conditions. The TiO₂ films were converted to PbTiO₃ by their reaction with diffused Pb and O ions during PbTiO₃ deposition at a gubstrate temperature of 410°C. Further diffusion of Pb and O induces formation of a Pb silicate layer at the interface. ZrO₂ did not seem to react with Pb and O during PbTiO₃ deposition at the same temperature, but the Pb and O ions that diffused through the ZrO₂ layer formed a Pb silicate layer between the ZrO₂ and Si substrate. The TiN films did not seem to react with Pb and O ions during the deposition of PbTiO₃ at 410°C, but reacted with PbTiO₃ to form a lead-deficient pyrochlore during postdeposition rapid thermal annealing at 700°C. However, TiN could effectively block the diffusion of Pb and O ions into the Si substrate and the formation of Pb silicate at the interface.     

Advanced underfill for high thermal reliability

The key to the success of flip‐chip technology lies in the availability of sucessful underfill materials. However, the reliability of flip‐chip technology using current underfill materials is generally found to be lower than that of conventional wire‐bond connection packaging materials such as epoxy molding compound (EMC) because of the high coefficients of thermal expansion (CTE) and moisture absorption of cured underfill material. In this study desbimide (DBMI), which has a low melting point (about 80°C), was used in the underfill materials as a cohardener. As a result, DBMI‐added underfill can show excellent thermal reliability, which is due to the superior properties of the CTE, the elastic modulus, and water resistance. When the properties of a 2 wt % DBMI‐added underfill were compared with those of a typical underfill (epoxy/anhydride), the CTE value was reduced to less than one‐half at the solder reflow temperature (about 200°C), the elastic modulus was reduced to less than one‐half in the temperature region below the glass‐transition temperature, and the water resistance was improved twofold. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2617–2624, 2002     

Fully aliphatic polyimides from adamantane‐based diamines for enhanced thermal stability,solubility, transparency,and low dielectric constant

We have synthesized a series of fully aliphatic polyimides (APIs) from bicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride (BOCA) and various aliphatic diamines, including linear aliphatic, flexible alicyclic, and rigid adamantyl diamines. We performed the polymerization reactions using one‐step syntheses in m‐cresol at elevated temperatures without the isolation of poly(amic) acid. The chemical composition and structure of the polymers were characterized by nuclear magnetic resonance (NMR) and infrared (IR) spectrometry. The characterization data are reported from analyses using gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), and wide‐angle X‐ray diffraction (WXAD) measurements. The polyimides are also subjected to solubility, solution viscosity, tensile strength, transparency, and dielectric constant measurements. The resultant polyimides possess well‐controlled molecular weight, reasonable intrinsic viscosity, good transparency, enhanced solubility, low dielectric constants, and high glass transition temperature, together with marginal thermal and mechanical stability. These properties were enhanced in copolyimides containing equimolar amounts of rigid and flexible moieties. These rigid‐rod APIs derived from the alicyclic dianhydride and aliphatic diamines are promising candidates as advanced materials for future applications in micro‐ and photoelectronic devices. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3316–3326, 2006     

Synthesis of syndiotacticity‐rich high molecular weight poly(vinyl alcohol) by suspension polymerization of vinyl pivalate and saponification

Vinyl pivalate (VPi) was suspension‐polymerized to synthesize high molecular weight (HMW) poly(vinyl pivalate) (PVPi) with a high conversion above 95% for a precursor of syndiotacticity‐rich HMW poly(vinyl alcohol) (PVA). Also, the effects of the polymerization conditions on the conversion, molecular weight, and degree of branching (DB) of PVPi and PVA prepared by the saponification of PVPi were investigated. Bulk polymerization was slightly superior to suspension polymerization in increasing the molecular weight of PVA. On the other hand, the latter was absolutely superior to the former in increasing the conversion of the polymer, indicating that the suspension polymerization rate of VPi was faster than that of the bulk one. These effects could be explained by a kinetic order of a 2,2′‐azobis(2,4‐dimethylvaleronitrile) concentration calculated by the initial rate method. Suspension polymerization of VPi at 55°C by controlling various polymerization factors proved to be successful in preparing PVA of HMW [number‐average degree of polymerization (P_n): 8200–10,500], high syndiotactic diad content (58%), and very high yield (ultimate conversion of VPi into PVPi: 94–98%). In the case of the bulk polymerization of VPi at the same conditions, the maximum P_n and conversion of 10,700–11,800 and 32–43% were obtained, respectively. The DB was lower and the P_n was higher with PVA prepared from PVPi polymerized at lower initiator concentrations. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 832–839, 2003