Hreels of methanol oxidation on polycrystalline silver: Spectroscopic evidence for adsorbed intermediates in the conversion of methoxide to formaldehyde and water

The adsorption and the decomposition of methanol on an oxygen precovered polycrystalline silver surface were characterized by high resolution electron energy loss spectroscopy. A stable methoxy species and subsequently two new intermediates related to the decomposition of methoxy have been isolated and identified by temperature profiled ELS.     

长直SiO_2纳米线的制备和结构表征

采用磁控溅射法,以Si粉和溅金Si(111)为原料,加入C粉,在Si(111)衬底上制备无定形SiO2纳米线。首先,在Si(111)衬底上分别溅射厚度为18和36 nm的Au。然后,在1 100℃条件下处理80 min。用扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、傅里叶红外光谱(FTIR)和X射线衍射方法 (XRD)等测试手段对退火后的SiO2纳米线的表面相貌、微观结构进行分析。结果表明,反应后有大量长而直的SiO2纳米线生成。而且随着溅射Au厚度的增加,SiO2纳米线的数量增多,且长度更长。这表明,SiO2纳米线的生长与溅射Au的厚度密切相关。     

Improving Transport Layer Performance in Multihop Ad Hoc Networks by Exploiting MAC Layer Information

The traditional TCP congestion control mechanism encounters a number of new problems and suffers a poor performance when the IEEE 802.11 MAC protocol is used in multihop ad hoc networks. Many of the problems result from medium contention at the MAC layer. In this paper, we first illustrate that severe medium contention and congestion are intimately coupled, and TCP's congestion control algorithm becomes too coarse in its granularity, causing throughput instability and excessively long delay. Further, we illustrate TCP's severe unfairness problem due to the medium contention and the tradeoff between aggregate throughput and fairness. Then, based on the novel use of channel busyness ratio, a more accurate metric to characterize the network utilization and congestion status, we propose a new wireless congestion control protocol (WCCP) to efficiently and fairly support the transport service in multihop ad hoc networks. In this protocol, each forwarding node along a traffic flow exercises the inter-node and intra-node fair resource allocation and determines the MAC layer feedback accordingly. The end-to-end feedback, which is ultimately determined by the bottleneck node along the flow, is carried back to the source to control its sending rate. Extensive simulations show that WCCP significantly outperforms traditional TCP in terms of channel utilization, delay, and fairness, and eliminates the starvation problem     

改进的深度脱木素的硫酸盐蒸煮：第一部分 用硫化钠预处理的桉树硫酸盐蒸煮

用硫化钠水溶液预处理桉树，接着进行改进的深度脱木素硫酸盐蒸煮。结果表明，在１６０℃预处理后脱木素的选择性较常规硫酸盐蒸煮有显著提高，可得到低Ｋａｐｐａ值（约为１０）的浆而没有明显的强度损失。     

西部城乡中学体育教育资源配置的系统优化

本文对西部城乡中学体育教育资源的配置情况进行了分析,并对其配置进行了优化分析。体育资源配置的优化分析采用基于B/S结构的资源配置系统,并对系统进行了设计,对TCP/IP协议这项技术进行相关分析。     

Efficient Polymer Solar Cells with a High Open Circuit Voltage of 1 Volt

A series of polymers containing benzo[1,2‐b:4,5‐b′]dithiophene and N‐alkylthieno[3,4‐c]pyrrole‐4,6‐dione are designed. By incorporating different alkylthienyl side chains, the fill factor (FF) and open circuit voltage (V_oc) of the copolymers are further improved. The experimental results and theoretical calculations show that the size and topology of the side chains can influence the polymer solubility, energy levels, and intermolecular packing by altering the molecular coplanarity. As a result of improved morphology and fine‐tuned energy levels, an increased FF and a high V_oc of 1.00 V are achieved, as well as a power conversion efficiency of 6.17%, which is the highest efficiency ever reported for polymer solar cells with a V_oc over 1 V.     

变频器在恒压供水上的应用

简要介绍了JP6C—AP1变频器的特点及在恒压供水上的应用。     

数据中继卫星系统的数据传输协议研究

首先介绍了美国中继卫星系统的基本概况,给出了其系统组成框图和连接关系,依据中继卫星系统数据传输任务和数据传输需求,并在分析比较ESA和CCSDS的星地数据传输管理协议的基础上,提出了使用CCSDS组织的AOS建议书作为数据中继卫星系统的数据传输协议建议,给出了数据传输帧的定义和初步操作建议。     

An Investigation on the Coupled Thermal–Mechanical–Electrical Response of Automobile Thermoelectric Materials and Devices

Thermoelectric (TE) materials, which can directly convert heat to electrical energy, possess wide application potential for power generation from waste heat. As TE devices in vehicle exhaust power generation systems work in the long term in a service environment with coupled thermal–mechanical–electrical conditions, the reliability of their mechanical strength and conversion efficiency is an important issue for their commercial application. Based on semiconductor TE devices wih multiple p–n couples and the working environment of a vehicle exhaust power generation system, the service conditions of the TE devices are simulated by using the finite-element method. The working temperature on the hot side is set according to experimental measurements, and two cooling methods, i.e., an independent and shared water tank, are adopted on the cold side. The conversion efficiency and thermal stresses of the TE devices are calculated and discussed. Numerical results are obtained, and the mechanism of the influence on the conversion efficiency and mechanical properties of the TE materials is revealed, aiming to provide theoretical guidance for optimization of the design and commercial application of vehicle TE devices.     

终端靶场中相位畸变对近场光束质量的影响

终端靶场聚焦系统中的光学元件上存在不可避免的缺陷致使光场波前发生畸变,根据高功率激光装置终端靶场系统中强光束传输的特点,建立了描述光学元件引入的局域相位调制的模型,研究了终端靶场中具有高斯型相位波前畸变的平顶光束经过透镜会聚,并在后续防溅射板等熔石英介质中经历非线性增长的传输演变过程,详细分析了高斯型相位波前畸变、熔石英厚度和透镜焦距对终端靶场聚焦系统中的近场光束质量的影响。结果表明,高斯型波前畸变越严重、熔石英厚度越长、透镜焦距越短,近场光束质量越差,中高频增长越多。