The hydration of jet cement at 20°C

Two types of jet cement having different retarders were investigated. Both physical properties such as mechanical strength, pore size distribution and porosity and chemical processes of hydration such as rate of hydration and the kind of hydrate produced upon hardening of jet cement are strongly affected by the method of the regulation of setting. The difference between the mechanical strength developed is discussed.     

Properties of aluminophosphate concretes containing various types of orthophosphoric acid

Conclusions The type of orthophosphoric acid has the maximum influence on the properties of corundum concretes, a lower influence on high-alumina concretes, and practically no influence on quartz-clay concretes. It is desirable to use wet-process orthophosphoric acid for refractory concretes. The excellent properties of concretes in the system A1₂O₃-SiO₂ based on this acid which is also cheaper enabled us to recommend it for preparing refractory concretes.The advantage of using H₃PO₄ of various types for corundum concretes is determined by the requirements placed on them in actual working conditions.Translated from Ogneupory, No.6, pp. 58–61, June, 1970.     

Synthesis and characterization of maltose fatty acid monoesters as biosurfactants

Maltose long-chain fatty acid esters (MFAE), esterified at the 6 and 6′ position, were synthesized with stearic, palmitic, myristic, and oleic groups. Synthesis yields were 15–20% based on initial maltose present, and structural confirmation was obtained using plasma desorption mass spectrometry and nuclear magnetic resonance spectroscopy. These surfactants have surface tensions in the range of 34–36 dyn/cm at their critical micelle concentrations (CMC) of approximately 10⁻⁵–10⁻⁶ mol/L. The increased chain lengths have a marked effect, reducing CMC values for MFAE by approximately three orders of magnitude over similar carbohydrate-based dodecyl chain sources. Within chain lengths between 14 and 18 carbons, the rate of change in CMC is significant and decreases with increasing chain length for MFAE. The melting points of MFAE are approximately 40°C, and the heat capacities range from 1.6 to 1.9 J/g·K. These numbers are comparable to those of sucrose esters, indicating their applicability in similar uses. However, because MFAE, unlike sucrose, possess an anomeric carbohydrate carbon position, these surfactants maintain their reducing nature and are susceptible to further derivatization. They are also synthesized from renewable, economical carbohydrates and lipids and may provide an excellent alternative to pertrochemical-derived products.     

Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

Structure development in amorphous starch as revealed by X‐ray scattering: Influence of the network structure and water content

The evolution of the amorphous structure of starch was characterized during the drying process by real‐time X‐ray wide‐angle scattering. The X‐ray diffractograms of injection‐molded starch show two superposed, rather broad, scattering maxima indicative of noncrystalline structures. The location of the two peaks has been associated to disordered starch single helices. A third maximum that arises upon drying the material in vacuum is associated to the scattering emerging from regions containing double helices. A model for the starch network is proposed, assuming a primary and a secondary component. The wider, temperature stable component appearing first, is correlated to the entanglement network of the melt. The narrower network component, which is created later, at lower temperature (secondary network), is explained by the formation of double helix regions that densify the wider primary network. The secondary network is increased strongly by the drying process. X‐ray experiments performed during the penetration of water, provoking a higher molecular mobility, reveal a better‐packed helical structure that becomes the precursor of a double helix crystalline formation. When temperature increases, the secondary network is dissolved and water molecules arrange themselves in better‐organized crystals as strongly bound crystal water. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1880–1886, 2006     

Packed bed electrodes. I. The electrochemical extraction of copper ions from dilute aqueous solutions

A study has been made of the cathodic deposition of copper ions from flowing dilute aqueous solutions onto a packed bed of graphite. The electrodeposition reaction is mass transfer controlled and expressions are presented for the cathodic current as a function of time, solution flow rate and bed characteristics. These have been verified from potentiostatic experiments. The cathode current efficiency is shown to approach 100% and packed bed electrodes are shown to be an effective means of extracting or removing metal ions from dilute solutions.     

Bücherschau

Ohne Zusammenfassung VDI     

Nonlinear Variation of Refractive Index of Vitreous Silica with Pressure to 7 Kbars

The variation of refractive index of vitreous silica with purely hydrostatic pressure to 7 kbars was determined from the shift of the localized interference fringes across the specimen kept in an optical pressure bomb. Allowance for the change in the thickness of the specimen was made with the help of Murnaghan's finite-strain theory and the recently determined third-order elastic constants. The refractive index for λ 5893 A increases linearly with pressure with a slope of 9.2 × 10⁻⁴/kbar up to 4 kbars; thereafter it increases nonlinearly. The increase in the refractive index, however, is linear with respect to the Lagrangian strain in the range investigated, except for a slight tendency for departure from linearity at the highest pressures. No hysteresis effects caused by permanent densification were noted. The results are interpreted in the light of Mueller's theory of photoelasticity of amorphous solids.