D.c. and a.c. electrical properties of vacuum evaporated thin SiO/GeO2 films

The d.c. and a.c. electrical properties were studied for various compositions of SiO/GeO₂ co-evaporated thin films carrying aluminium electrodes, in the temperature range 193–413 K. A.c. measurements were made over the frequency range 2x10²–10⁶Hz. The value of the d.c. activation energy was found to decrease with increasing GeO₂ content in the SiO. In the region of high applied field (above 10⁶ Vm^–1, the conduction mechanism is governed by Schottky emission at the blocking contact. The a.c. electrical conductivity, (), varies with frequency according to the relation () ^s, where the exponent s was found to be dependent on temperature and frequency. The a.c. conduction at low temperature was due to an electronic hopping process. The number of localized sites was estimated from the a.c. measurements for different compositions of SiO/GeO₂ using the models proposed by Elliott and by Pollak, and the values are compared. The Elliott model satisfactorily accounts for the observed a.c. electrical results. A correlation was found between activation energy, optical band gap, conductivity and number of localized sites for the various compositions of SiO/GeO₂ films. The relative dielectric constant, _r, and loss factor, tan , were found to increase with the increase of GeO₂ content in the films.     

A single-solenoid pulsed-magnet system for single-crystal scattering studies

We present a pulsed-magnet system that enables x-ray single-crystal diffraction in addition to powder and spectroscopic studies with the magnetic field applied on or close to the scattering plane. The apparatus consists of a single large-bore solenoid, cooled by liquid nitrogen. A second independent closed-cycle cryostat is used for cooling samples near liquid helium temperatures. Pulsed magnetic fields close to ~30 T with a zero-to-peak-field rise time of ~2.9 ms are generated by discharging a 40 kJ capacitor bank into the magnet coil. The unique characteristic of this instrument is the preservation of maximum scattering angle (~23.6°) on the entrance and exit sides of the magnet bore by virtue of a novel double-funnel insert. This instrument will facilitate x-ray diffraction and spectroscopic studies that are impractical, if not impossible, to perform using split-pair and narrow-opening solenoid magnets. Furthermore, it offers a practical solution for preserving optical access in future higher-field pulsed magnets.     

The influences of thermal stratification and flow interaction on the enhanced natural convective heat transfer at low temperatures

This paper applies the modified heat transfer correlation: Nu/Nu_iso = f(S) to horizontal cylinders immersed in the thermally stratified vapour over boiling liquid nitrogen. Correlation of the heat transfer data confirms that the thermal stratification parameter, S is the appropriate parameter to account for the observed heat transfer enhancement.When the data are compared with the theory for natural convection in an extensive environment with a linear thermal stratification, it is found that heat transfer in the cryogenic vapour columns is significantly enhanced. This enhancement appears to arise from a secondary flow circulation inducecd by the interaction of the flow field around the heated cylinder with the primary flow of the cold vapour column. The influence of this flow interaction upon the heat transfer has been studied by varying the cylinder and vapour column diameters. The data have been analysed and correlated with the empirical relation:

$\text{Nu}\text{Nu}{}_{\mathrm{iso}}\text{=0.80}{}^{0.5}\text{(}\text{D}\text{W}\text{)}{}^{-0.4}$

All the results on enhanced convective heat transfer obtained at Southampton are reported and the conditions under which heat transfer enhancement takes place are discussed.     

An electrochemical technique to deposit thin films of PbTe

PbTe thin films were deposited electrochemically on transparent conducting oxide coated (TCO) glass substrates from a solution of lead acetate and TeO₂ at low pH. A lead (Pb) strip was used as a sacrificing anode and the TCO glass acted as the cathode, which were short-circuited externally. Depositions were carried out at different temperatures of the bath to study the growth kinetics and grain growth. X-ray diffraction technique, scanning electron microscopy, infrared spectroscopy and resistivity measurements were carried out to characterize the deposited films. The films were polycrystalline in nature with a cubic phase.     

Channel Adaptive Quantization for Limited Feedback MIMO Beamforming Systems

Multiple-input multiple-output (MIMO) wireless systems can achieve significant diversity and array gain by using transmit beamforming and receive combining techniques. In the absence of full channel knowledge at the transmitter, the transmit beamforming vector can be quantized at the receiver and sent to the transmitter using a low-rate feedback channel. In the literature, quantization algorithms for the beamforming vector are designed and optimized for a particular channel distribution, commonly the uncorrelated Rayleigh distribution. When the channel is not uncorrelated Rayleigh, however, these quantization strategies result in a degradation of the receive signal-to-noise ratio (SNR). In this paper, switched codebook quantization is proposed where the codebook is dynamically chosen based on the channel distribution. The codebook adaptation enables the quantization to exploit the spatial and temporal correlation inherent in the channel. The convergence properties of the codebook selection algorithm are studied assuming a block-stationary model for the channel. In the case of a nonstationary channel, it is shown using simulations that the selected codebook tracks the distribution of the channel resulting in improvements in SNR. Simulation results show that in the case of correlated channels, the SNR performance of the link can be significantly improved by adaptation, compared with nonadaptive quantization strategies designed for uncorrelated Rayleigh-fading channels     

Erosion-corrosion behavior of SiC particle-reinforced Al-Si alloy in NaOH slurry

The erosion-corrsosion behavior of SiC particle-reinforced Al-Si alloy has been studied in NaOH slurry simulating the mining atmosphere. The study was performed at two different sand concentrations, namely, 20 and 30 wt pct, and at a speed of 900 rpm. It is depicted that the wear rates decreased with increasing sand content, indicating that corrosion is the dominating mode of material removal. Further composite exhibited lower wear resistance than the laloys irrespective of the sand concentration. Scanning electron microscope (SEM) observations indicated the dissolution of dendrites of Al due to severe corrosion, leaving behind the network of Si. This ultimately results in the falling of Si particles from the matrix, leaving behind voids. This also results in the formation of voids around the SiC particles and leads to pullout of SiC particles from the matrix during the wear process.     

Comparison of Gradually Varied Flow Computation Algorithms for Open-Channel Network

This paper presents a comparison of two algorithms—the forward-elimination and branch-segment transformation equations—for separating out end-node variables for each branch to model both steady and unsteady flows in branched and looped canal networks. In addition, the performance of the recursive forward-elimination method is compared with the standard forward-elimination method. The Saint–Venant equations are discretized using the four-point implicit Preissmann scheme, and the resulting nonlinear system of equations is solved using the Newton–Raphson method. The algorithm using branch-segment transformation equations is found to be at least five times faster than the algorithm using the forward-elimination method. Further, the algorithm using branch-segment transformation equations requires less computer storage than the algorithm using the forward-elimination method, particularly when only nonzero elements of the global matrix are stored. Comparison between the Gauss-elimination method and the sparse matrix solution technique for the solution of the global matrix revealed that the sparse matrix solution technique takes less computational time than the Gauss-elimination method.     

A new external sorting algorithm with no additional disk space

This paper is concerned with an external sorting algorithm with no additional disk space. The proposed algorithm is a hybrid one that uses Quicksort and special merging process in two distinct phases. The algorithm excels in sorting a huge file, which is many times larger than the available memory of the computer. This algorithm creates no extra backup file for manipulating huge records. For this, the algorithm saves huge disk space, which is needed to hold the large file. Also our algorithm switches to special merging process after the first phase that uses Quicksort. This reduces the time complexity and makes the algorithm faster.     

Customizing system software using OO frameworks

Today's applications have exploded in their diversity, but most operating systems are still general-purpose and inefficient. One of the benefits of using an OO approach is the ability to modify very small details of an operating system, which makes it easy to tailor the system to the application. My experience indicates that optimizing an operating system for the general case can result in mediocre performance for specialized applications, especially parallel applications. Therefore, I envision a customizable operating system built from components that will allow an optimal match between application behavior and hardware architecture. I propose an object-oriented operating system in which design frameworks support alternative implementations of key systems software services