Global data and control in multicomputers: Operating system primitives and experimentation with a parallel branch-and-bound algorithm

The static distribution of work among tasks is not possible in many parallel applications. Therefore, it is essential to implement convenient and efficient abstractions for ‘work sharing’ on multicomputers. This paper compares the utility of two operating system facilities for the implementation of such ‘work sharing’: (1) a system for the migration of processes from heavily to less loaded processors and (2) a more general OS construct for the implementation of arbitrary distributed objects. Both were implemented as extensions to the Intel iPSC/1 operating system on a 32-node hypercube. Their experimental evaluation is based on a parallel implementation of a branch-and-bound algorithm. Two sets of results are attained. First, the necessity of the constructs for dynamic work sharing is demonstrated for applications with dynamic data domains, such as parallel branch-and-bound algorithms. This is followed by measurements that demonstrate the acceptable cost of process migration for a specific parallel branch-and-bound algorithm. These measurements are then compared with results attained with the construct for the implementation of distributed objects. Second, when using branch-and-bound to solve the Travelling Salesperson Problem (TSP), evaluation of the resulting parallel TSP program shows that some analytical and simulation results attained in past, published work may not hold.     

3β-Chlorsteroide – Ernährungsphysiologische und toxikologische Eigenschaften in Mäusen

3β-Chlorosteroids - Nutritional and Toxicological Effects in Mice 3-Chlorosteroids, e.g. 3-chlorocholest-5-ene and 3-chlorostigmast-5-ene, are formed from the corresponding sterols during the industrial hydrolysis of proteins for the production of flavor enhancers. In future, these compounds may also attract attention as environmental contaminants. A simple method for the fractionation and quantitative determination of 3β-chlorosteroids by C₁₈ reversed-phase HPLC has been developed and used for the analysis of these chlorinated steroids in protein hydrolysates. In addition, the biological effects of orally administrated 3β-chloro-steroids were tested in mice that were fed 3β-chlorocholest-5-ene and 3β-chlorostigmast-5-ene in doses of 1 and 10 mg/animal/day. The results of our study showed that body and organ weights as well as feed intake of the various experimental groups were not significantly different from those of the control group. The quantitative determination of 3β-chlorosteroids in organs and tissues revealed that intestinal absorption of 3β-chlorocholest-5-ene was higher than that of 3β-chlorostigmast-5-ene. Highest concentration of 3β-chlorocholest-5-ene was detected in liver and adipose tissue. Absorption and distribution in tissues as well as metabolism of both radioactive 3β-chloro-[4-¹⁴C]cholest-5-ene and 3β-chloro-[4-¹⁴C]stigmast-5-ene have also been studied in mice. At 2 hours after stomach incubation of the two substrates, large proportions of radioactivity had passed through the small intestine and were concentrated in the contents of caecum and colon. Only small proportions of radioactivity were detected outside the alimentary canal, predominantly in the liver. Histopathological examination of sections of organs and tissues such as stomach, duodenum, liver, kidneys, and spleen showed no indications of irreversible cell damages caused by 3β-chlorosteroids.     

Formulation effects on the distribution of pigment particles in paints

Modern water-borne paints are widely used in different areas of applications ranging from high-gloss lacquers to flat, scrub-resistant interior paints. From this point of view, the pigment volume concentration (PVC) is one key-parameter adjusting the desired application properties. In high-gloss paints, for example, a low PVC is required to accommodate the proper surface roughness to achieve a high gloss. Consequently, a high concentration of TiO₂ is needed to obtain a good hiding power at the same time. Flat paints nonetheless are highly filled due to cost reasons preferentially by CaCO₃ and the pigment binding capacity of the binder is crucial. In this work, paint formulations differing in PVC, and the type of binder or dispersing agent were investigated by various techniques concerning the distribution and aggregation of pigment particles, e.g. TiO₂. To get a detailed insight into the structure of the liquid paints and the corresponding dried paint films, suitable analytical tools were applied for characterization. The structure of the liquid paints was analyzed by remission light spectroscopy (RLS), disc centrifugation, cryogenic-replication transmission electron microscopy (Cryo-replica TEM) and cryogenic-scanning electron microscopy (Cryo-SEM). The pigment distribution in the corresponding dried paint films was examined by means of atomic force microscopy (AFM), TEM and RLS. The tendency of the TiO₂-pigments to form aggregates was found to depend on both: first on the type of binder used in the formulation and second on the employed dispersing agent. It is shown that only by adjusting the properties of the binder in combination with common dispersants, it is possible to get well-distributed TiO₂ particles within the paint. Correlation of application properties, e.g. gloss and blocking to the microscopic structure is presented.     

A Synthetic Approach to Star‐Like Polymers of Styrene and Butyl Acrylate by Linking Reactions using Functionalized Methacrylates

Summary: Coupling reactions between terminal functionalized polymer chains were chosen for the synthesis of star‐like polymers consisting of polystyrene and polystyrene‐block‐poly[styrene‐co‐(butyl acrylate)] arms. For the preparation of terminal functionalized polymer chains a side reaction of the 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) mediated free radical polymerization of methacrylates could be used successfully to convert TEMPO terminated polymers into end functionalized polymers. The number of functionalized monomer units attached to the polymer chain is directly related to the TEMPO concentration during this reaction. Different polystyrenes and polystyrene‐block‐poly[styrene‐co‐(butyl acrylate)] block copolymers were functionalized with a variable number of epoxide and alcohol groups at the chain end. For the determination of the optimal reaction parameters for the coupling reactions between these polymer chains, epoxy functionalized polystyrenes were converted with hydroxy functionalized polystyrenes under basic and acidic conditions. By activation with sodium hydride or boron trifluoride star‐like polymers were synthesized under mild conditions. The transfer of the reaction conditions to coupling reactions between end functionalized polystyrene‐block‐poly[styrene‐co‐(butyl acrylate)] copolymers showed that star‐like polymers with more than 12 arms were formed using boron trifluoride as activating agent.

     

The effect of fertilizer placement on nitrogen uptake and yield of wheat and maize in Chinese loess soils

Field trials were carried out to study the fate of¹⁵N-labelled urea applied to summer maize and winter wheat in loess soils in Shaanxi Province, north-west China. In the maize experiment, nitrogen was applied at rates of 0 or 210 kg N ha^–1, either as a surface application, mixed uniformly with the top 0.15 m of soil, or placed in holes 0.1 m deep adjacent to each plant and then covered with soil. In the wheat experiment, nitrogen was applied at rates of 0, 75 or 150 kg N ha^–1, either to the surface, or incorporated by mixing with the top 0.15 m, or placed in a band at 0.15 m depth. Measurements were made of crop N uptake, residual fertilizer N and soil mineral N. The total above-ground dry matter yield of maize varied between 7.6 and 11.9 t ha^–1. The crop recovery of fertilizer N following point placement was 25% of that applied, which was higher than that from the surface application (18%) or incorporation by mixing (18%). The total grain yield of wheat varied between 4.3 and 4.7 t ha^–1. In the surface applications, the recovery of fertilizer-derived nitrogen (25%) was considerably lower than that from the mixing treatments and banded placements (33 and 36%). The fertilizer N application rate had a significant effect on grain and total dry matter yield, as well as on total N uptake and grain N contents. The main mechanism for loss of N appeared to be by ammonia volatilization, rather than leaching. High mineral N concentrations remained in the soil at harvest, following both crops, demonstrating a potential for significant reductions in N application rates without associated loss in yield.     

Three‐dimensional modeling of porosity development during the gasification of a char particle

This work is devoted to the three‐dimensional, direct modeling of porosity and specific surface development during the gasification of a char particle. The model was developed for heterogeneous reactions occurring inside a char particle in a kinetically controlled regime. The main goal of this work is to analyze the impact of different pore size distributions on the particle carbon conversion rate. In particular, it is shown that under certain conditions the outer particle surface can influence the specific surface area. In this context the possible adaptation of the parameter ψ from the random pore model (RPM) developed by Bhatia and Perlmutter is explained. The results of simulations are compared against the RPM and discussed. Additionally, based on the results of simulations, the physics behind several input parameters used by the RPM are explored. Finally, the possible fragmentation of a chemically reacting char particle during its gasification in dependence of instantaneous porosity was investigated numerically. It was shown that the earliest fragmentation occurs at a carbon conversion of about 0.5–0.6 due to the disaggregation of the pore walls. The results are discussed and compared implicitly with data published in the literature. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1638–1647, 2017     

Deformation-mediated superstructures and cavitation of poly (l-lactide): In-situ small-angle X-ray scattering study

Cavitation and superstructure evolution of polymers during stretching play crucial roles to influence the mechanical properties of materials. In this study, we investigated deformation-mediated superstructures and cavitation of poly (l-lactide) (PLA) as well as their dependence on stretching temperatures by in-situ small-angle X-ray (SAXS) analysis coupled with mechanical testing. It is found that the cavitation and crystalline deformation are strongly influenced by stretching stress during deformation, which significantly depends on the stretching temperature. At lower stretching temperature (70 °C), the cavitation is initiated before the yielding and then stimulates the crystallite shearing. At higher stretching temperature (90 °C), however, the crystallites shear firstly and then crystalline deformation promotes the formation of cavities orientated along the stretching direction. High stretching temperature benefits the formation of relatively perfect crystals with high orientation. The results provide the basic knowledge of how to adjust the mechanical properties of polymer materials by controlling their superstructure in the deformation process.     

VIS/NIR spectroscopy for non-destructive freshness assessment of Atlantic salmon (Salmo salar L.) fillets

Visible/near-infrared spectroscopy has been evaluated for use in freshness prediction and frozen-thawed classification of farmed Atlantic salmon fillets, where fresh samples were stored as whole fish in ice. A handheld interactance probe for performing rapid measurements of single fillets and an imaging spectrometer for online analysis at an industrial speed of one fillet per second, have been used. Freshness as storage days in ice is predicted with an accuracy of 2.4 days for individual fillets, whereas frozen-thawed salmon fillets are completely separated from fresh fillets. The prediction results are comparable to previous results using the Quality Index Method with trained panelists. The region between 605 and 735 nm, which excludes interference by carotenoids and water, is appropriate for both frozen-thawed classification and freshness prediction of salmon fillets. The results indicate that the spectral changes are explained mainly by oxidation of heme proteins during the freeze–thaw cycle and during chilled storage in ice.     

Systematic survey on the prevalence of genes coding for staphylococcal enterotoxins SElM, SElO, and SElN

Staphylococcus aureus remains a leading cause of food-poisoning with substantial impact on public health. Using a multiplex polymerase chain reaction-DNA enzyme immunoassay (PCR-DEIA), we studied the presence of genes encoding staphylococcal enterotoxin-like (SEl) superantigens sem, sen, and seo, associated with the enterotoxin gene cluster (egc), in 429 clinical Staphylococcus aureus isolates. 294 (68.5%) isolates tested positive for at least one of the three SEl genes. In contrast to the fixed gene combination seg/sei also located on egc, a substantial number of isolates (n = 108) were found to bear only one or two of the genes encoding SElM, SElN, and SElO. Regarding the origin of the S. aureus isolates, a significant difference (P = 0.022) was found for the possession of seo (61.2% of blood isolates versus 42.9% of nasal strains). Also sem (not significantly) was found more common in blood isolates (52.1% versus 40.5%). The survey of the newly described SEl genes sem-seo supports the concept that most clinical S. aureus isolates harbor subsets of pyrogenic toxin superantigens. The potential contribution of seo and sem to the pathogenic potential of S. aureus has to be further evaluated.