Synthese von 2-Heterocyclidenamino-1,3-diazatrimethincyaninen

Synthesis of 2-Heterocyclidenamino-1, 3-diaza-trimethincyanines The synthesis of 2-[3-methyl-benzthiazol-(1, 3)-inylidene-(2)-amino]- and of substituted 2-[1, 3-dithiolyliden-(2)-amino]-1, 3-diaza-trimethincyanines is described. The heterocyclic imines 1 react with phosgene or thiophosgene to the corresponding ureas 2 and thiureas 3 , respectively. Alkylation of 3 to the 2-alkylmercapto-1, 3-diaza-trimethincyanines 4 and subsequent condensation with imine 1 yields the dyes 5 . The chemical and spectroscopical data of cyanines 5 are described.     

Submicron droplet formation in the human lung

The exhaled breath of humans contains droplets originating from the lung lining fluid. An analysis of these droplets for non-volatile proteinaceous biomarkers holds potential as a non-invasive diagnosis of lung diseases. To ease the interpretation of the diagnostic results, the source strength of the particles should be known und therefore an understanding of the particle generation process is required. It is assumed that during reopening of a collapsed terminal airway a liquid bridge of the lung lining fluid ruptures and droplets are generated. The objective of our experimental and theoretical study was to clarify the mechanisms of droplet generation for quiet breathing patterns by investigating in detail the number flux and the particle size distribution in the exhaled breath. The process of liquid film rupture is modelled by computational fluid dynamics analysis from which the droplet size distribution is calculated. In addition the number emission flux and the droplet size distribution are systematically measured in the exhaled breath of healthy volunteers. The strong increase of the particle emission flux with tidal volume and the good agreement between measured and calculated droplet number distribution both showing droplets primarily in the submicron range confirm the present hypothesis that reopening of collapsed airway structures associated with the rupture of a surfactant film is the physical mechanism of droplet generation. This was hypothesized previously in the literature.     

Triaxial MEMS accelerometer with screen printed PZT thick film

Piezoelectric thick films have increasing interest due to the potential high sensitivity and actuation force for MEMS sensors and actuators. The screen printing technique is a promising deposition technique for realizing piezoelectric thick films in the thickness range from 10–100 μm. In this work integration of a screen printed piezoelectric PZT thick film with silicon MEMS technology is shown. A high bandwidth triaxial accelerometer has been designed, fabricated and characterized. The voltage sensitivity is 0.31 mV/g in the vertical direction, 0.062 mV/g in the horizontal direction and the first mode resonance frequency is 11 kHz. A Finite Element Method (FEM) model is used to validate the measured sensitivity and resonance frequency. Good agreement between the model and the measurements is seen.     

Long-Wave and Integral Boundary Layer Analysis of Falling Film Flow on Walls With Three-Dimensional Periodic Structures

Falling films exhibit very complex wavy patterns, which depend on the properties of the liquid, the Reynolds number, the wall inclination angle, and the distance from the film inlet. The film hydrodynamics governs the heat and mass transfer in the liquid films. Our vision is to control and enhance heat and mass transport by using walls with specific microscale topographies that influence the falling film flow, stability, and wavy pattern. In this work, long-wave theory and integral boundary layer approximation are used for modeling the falling film flow on walls with three-dimensional periodic microstructures. The wall topography is periodic both in the main flow direction and in the transverse direction. Examples of such microstructures are longitudinal grooves with sinusoidal path (or meandering grooves) and herringbone structures. The effects of the Reynolds number, the wall inclination angle, and the longitudinal and transverse periods of the structure on the shape of liquid–gas interface are investigated. It is shown that, as opposed to straight grooves in longitudinal direction, grooves with meandering paths may lead to significant interface deformations.     

SiC ceramic micropatterns from polycarbosilanes

Micropatterned SiC ceramics were fabricated from polycarbosilanes applying a softlithographic replication technique. A polydimethylsiloxane mould replicated from a photolithographic microstructured silicon wafer was used as master structure. The polydimethylsiloxane mould was coated with a solution containing a mixture of two different polycarbosilanes in n-octane. After treatment at 200–400 °C the cross-linked polycarbosilane films were debonded and pyrolysed at 900 °C in nitrogen and subsequently crystallised at temperatures up to 1500 °C in argon. The cross-linking and thermal degradation behaviour of the polycarbosilanes was investigated by Fourier-transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis. X-ray diffractrometry showed the expected development of a nanocrystalline β-SiC (3 nm) as the main phase with increasing temperature. However, traces of α-SiO₂ derived from the polycarbosilane precursors were also detected by X-ray analysis. Removal of the α-SiO₂ dioxide with hydrofluoric acid in the pyrolysed samples and subsequent increased the crystallite size to 7 nm. The Young's modulus determined by nanoindentation was increased from 3 GPa after cross-linking to 110 GPa after crystallisation. Scanning electron microscopy revealed, that the initial micropatterns were fully retained in the pyrolysed and crystallised SiC ceramics. The micropatterned cross-linked and crystallised β-SiC based substrates exhibited light scattering characteristics, which qualify them as promising candidates for diffractive optical elements in microoptical applications.     

OpenSocial

Zusammenfassung  OpenSocial definiert eine Menge von Programmierschnittstellen für Anwendungen von Drittanbietern im Kontext sozialer Netzwerke. Unter der Verwendung von Standardtechnologien wie HTML und JavaScript k?nnen Entwickler interoperable Anwendungen erstellen, die auf den sozialen Graphen des jeweiligen Netzwerks zugreifen.