Soldering of Mg Joints Using Zn-Al Solders

Magnesium has applications in the automotive and aerospace industries that can significantly contribute to greater fuel economy and environmental conservation. The Mg alloys used in the automotive industry could reduce mass by up to 70 pct, providing energy savings. However, alongside the advantages there are limitations and technological barriers to use Mg alloys. One of the advantages concerns phenomena occurring at the interface when joining materials investigated in this study, in regard to the effect of temperature and soldering time for pure Mg joints. Eutectic Zn-Al and Zn-Al alloys with 0.05 (wt pct) Li and 0.2 (wt pct) Na were used in the soldering process. The process was performed for 3, 5, and 8 minutes of contact, at temperatures of 425 °C, 450 °C, 475 °C, and 500 °C. Selected, solidified solder-substrate couples were cross-sectioned, and their interfacial microstructures were investigated by scanning electron microscopy. The experiment was designed to demonstrate the effect of time, temperature, and the addition of Li and Na on the kinetics of the dissolving Mg substrate. The addition of Li and Na to eutectic Zn-Al caused to improve mechanical properties. Higher temperatures led to reduced joint strength, which is caused by increased interfacial reaction.     

Influence of yeast on the yield of fermentation and volatile profile of ‘Węgierka Zwykła’ plum distillates

The character of plum brandies depends on a unique aroma profile of the plum and the microbiota present on the surface of the fruits, as well as yeast used for fermentation. In this study, an evaluation of the effect of microorganisms applied for the fermentation of W?gierka Zwyk?a var. plum mashes and processing temperature (18 °C, 30 °C) on its efficiency and volatile profile, as well as taste and flavour of distillates obtained was performed. An estimation of the odour activity values (OAVs) of the volatile compounds was also conducted. Regardless of whether the fermentation was carried out using Saccharomyces bayanus wine yeast or by native microflora present on plums as well as raisins, the efficiency of this process was high and ranged between 91.7 and 96.7% of the theoretical efficiency. Especially rich in esters (among others ethyl acetate and isoamyl acetate) was the distillate derived after fermentation with the microflora of plums and raisins, at 18 °C. An evaluation of the individual aromatic effect of chemical compounds present in tested distillates, in terms of their OAVs, revealed that the highest OAVs were reached with isovaleraldehyde. Other compounds that showed aroma values >1 and possibly had an effect on the overall aroma of tested plum distillates were the following: hexanal, benzaldehyde, ethyl acetate, isoamyl acetate, ethyl benzoate, ethyl hexanoate, 1‐propanol, 2‐methyl‐1‐butanol, 3‐methyl‐1‐butanol and 1‐hexanol. The performed sensory ranking showed that the best rated distillate was the one obtained after fermentation with the indigenous microflora of plums and raisins, at 18 °C. Copyright © 2016 The Institute of Brewing & Distilling     

Effect of Cover Brine Type on the Quality of Meat from Herring Marinades

Effects of vinegar, oil, and sour cream brines on meat quality of 4 popular cold marinades from herring were investigated in the study. Cover brine type affected the composition and nutritive value of meat as well as the sensory and microbiological quality of marinated herring. Qualitative differences resulted from cover brine penetration into meat, and from diffusion of components from meat to vinegar brine. Compared to oil and sour cream, vinegar brine contributed to increased concentrations of salt and acetic acid, hardness, color brightness of marinades meat and to increased microbial contamination of meat. Furthermore, vinegar caused nitrogen losses to 15%, including valuable products of protein hydrolysis, enzymes, and total volatile bases. The rolling up of fillets reduced diffusion even by 50%. In turn, oil and sour cream were causing mainly a higher fat content and overall sensory evaluation of the marinades.     

Changes of bioactive components in berry seed oils during supercritical CO2 extraction

The objective of the work was to elucidate the chemical composition of fractions of oil extracts obtained during the supercritical extraction on a semi‐industrial scale from strawberry (Fragaria x ananassa Duch.), chokeberry [Aronia melanocarpa (Michx.)], and raspberry (Rubus idaeus L.) seeds from industrial press cake. The oil extracts differed in terms of their content of bioactive components: carotenoids, tocopherols, chlorophylls, and fatty acids. Raspberry seed oil was the richest source of tocopherols (620.1–2166.7 mg kg^?1) and α‐linolenic acid (above 37%). Chokeberry seed oil had the highest content of linoleic acid (above 70%), and α‐tocopherol (166.0–1104.8 mg kg^?1). Strawberry oil was characterized by the highest content of chlorophylls and α‐linolenic acid (above 30%). It was showed that the oil fraction collected at the beginning of extraction is characterized by a high acid value, which requires purification steps to be used for food purposes.

Practical applications

Strawberry, raspberry, and chokeberry by‐products left over from the production of concentrated juice are a valuable source of oils rich in n‐3 and n‐6 polyunsaturated fatty acids, tocopherols, and carotenoids. The research showed that the fractionation of extracts in the course of supercritical extraction leads to oils with varying amounts of different bioactive compounds, and thus to products with potentially wide applications. Seeds oils have high potential utility as a source of unconventional oil for cosmetic and pharmaceutical sectors and biodiesel. Their targeted utilization may be exploited for economic, environmental and health benefits.     

Palm Oil-Rich Diet Affects Murine Liver Proteome and S-Palmitoylome

Palmitic acid (C16:0) is the most abundant saturated fatty acid in animals serving as a substrate in synthesis and β-oxidation of other lipids, and in the modification of proteins called palmitoylation. The influence of dietary palmitic acid on protein S-palmitoylation remains largely unknown. In this study we performed high-throughput proteomic analyses of a membrane-enriched fraction of murine liver to examine the influence of a palm oil-rich diet (HPD) on S-palmitoylation of proteins. HPD feeding for 4 weeks led to an accumulation of C16:0 and C18:1 fatty acids in livers which disappeared after 12-week feeding, in contrast to an accumulation of C16:0 in peritoneal macrophages. Parallel proteomic studies revealed that HPD feeding induced a sequence of changes of the level and/or S-palmitoylation of diverse liver proteins involved in fatty acid, cholesterol and amino acid metabolism, hemostasis, and neutrophil degranulation. The HPD diet did not lead to liver damage, however, it caused progressing obesity, hypercholesterolemia and hyperglycemia. We conclude that the relatively mild negative impact of such diet on liver functioning can be attributed to a lower bioavailability of palm oil-derived C16:0 vs. that of C18:1 and the efficiency of mechanisms preventing liver injury, possibly including dynamic protein S-palmitoylation.     

Analysis of indole compounds in edible Basidiomycota species after thermal processing

Methanolic extracts of processed fruiting bodies of six edible mushroom species (Basidiomycota) - Armillaria mellea, Boletus badius, Boletus edulis, Cantharellus cibarius, Lactarius deliciosus collected from natural habitats and Pleurotus ostreatus of commercial origin - were analysed for the presence of non-hallucinogenic indole compounds. Thermal processing was designed in such a way that it mimicked conditions used for cooking of mushroom dishes, since only a narrow group of mushrooms can be eaten raw, while indole compounds are thermolabile. All processed extracts were shown to contain l-tryptophan (up to 8.92 mg/100 g dw). The contents of the remaining compounds, 5-methyltryptophan, tryptamine, melatonin, indoleacetonitrile and indole, varied in different species (from 0.71 to 6.55 mg/100 g dw). Extract of processed C. cibarius fruiting bodies contained l-tryptophan, 5-methyltryptophan, tryptamine, melatonin, indoleacetonitrile and indole (1.96-4.94 mg/100 g dw) whereas l-tryptophan (2.78 mg/100 g dw) and tryptamine (2.77 mg/100 g dw) were the only indole compounds identified in the processed fruiting bodies of A. mellea.     

Synthesis of polymer membranes of different porosity and their application for phenol removal from liquid phase

Preparation of polymeric membranes based on polyethersulfone (PES) modified by adding different amounts of a pore-forming agent (PVP) is presented, and potential application of the membranes obtained for removal of phenol from the liquid phase is examined. The addition of various amounts of PVP has been shown to bring about changes in the content of the surface oxygen groups, but has no significant effect on the chemical character of the groups and acidic groups dominate. Filtration by phenol solution leads to significant changes in the total content of surface oxides; however, the acidic groups remain dominant. Membranes characterized by higher porosity exhibited more stable and higher rejection ratio for phenol removal. Although all the membranes were characterized by similar rejection ratios for phenol removal, the cake resistance (Rc) and pore resistance (Rp) values were found to depend significantly on the structure and porosity of the membrane applied for filtration.     

Determination of Acoustical Parameters of Aqueous Solution of Kolliphors Binary Mixtures Using Density,Speed of Sound,Viscosity, and Surface Tension Measurements

Measurements of density, speed of sound, and surface tension as well as viscosity of aqueous Kolliphor® ELP (ELP) and Kolliphor® RH 40 (RH40) solutions as well as binary mixtures at different surfactant mole fractions were made at 293 K to investigate their aggregation behavior. The free volume, internal pressure, and molar cohesive energy were calculated and compared to the specific acoustic impedance and intermolecular free length to obtain qualitative information about the character of interactions between the surfactant molecules in the mixture through the water phase.