Performance of SOR methods on modern vector and scalar processors

The building-cube method (BCM) is a new generation algorithm for CFD simulations. The basic idea of BCM is to simplify the algorithm in all stages of flow computation to achieve large-scale simulations. Calculation of a pressure field using the Successive Over Relaxation (SOR) method consumes most of the total execution time required for BCM. In this paper, effective implementations on modern vector and scalar processors are investigated. NEC SX-9 and Intel Nehalem-EX are the latest vector and scalar processors. Those processors have much higher peak performances than their previous-generation processors. However, their memory bandwidth improvement cannot catch up with the performance improvement of processors. This is the so-called memory wall problem. In our paper, we discuss optimization techniques for implementation of the SOR method based on architectural characteristics of these modern processors, and evaluate their effects on the sustained performances of these processors for BCM.     

Main R&D issues for fast reactor structural design standard

For realization of economical and reliable fast reactor (FR) plants, the Japan Atomic Energy Agency (JAEA) and the Japan Atomic Power Company (JAPC) are cooperating on the “Feasibility Study on Commercialized FR Cycle Systems”. To certify the design concepts through evaluation of the structural integrity of FR plants, the research and development of the “Elevated Temperature Structural Design Guide for Commercialized Fast Reactor (FDS)” is recognized as an essential theme. The FDS focuses on particular failure modes of FRs such as ratchet deformation and creep-fatigue damage due to cyclic thermal loads. For precise evaluation of these modes, the research and development for three main issues is in progress. First, the “Refinement of Failure Criteria” needs to be addressed for particular failure modes of FRs. Secondly, the development of “Guidelines for Inelastic Design Analysis” is conducted to predict elastic plastic and creep deformation under elevated temperature conditions. Lastly, efforts are being made toward preparing “Guidelines for Thermal Load Modeling” for the design of FR components where thermal loads are dominant.     

Characteristics of dissimilar laser-brazed joints of isotropic graphite to WC–Co alloy

The effect of Ti serving as an activator in a eutectic Ag–Cu alloy filler metal in dissimilar laser-brazed joints of isotropic graphite and a WC–Co alloy on the joint strength and the interface structure of the joint is investigated in this study. To evaluate the joint characteristics, the Ti content in the filler metal was increased from 0 to 2.8 mass%. The laser brazing was carried out by irradiating a laser beam selectively on the WC–Co alloy plate in Ar atmosphere. The threshold content of Ti required to join isotropic graphite to WC–Co alloy was 0.4 mass%. The shear strength at the brazed joint increased rapidly with increasing Ti content up to 1.7 mass%, and a higher Ti content was found to be likely to saturate the shear strength to a constant value of about 14 MPa. The isotropic graphite blocks also fractured at this content. The concentration of Ti observed at the interface between isotropic graphite and the filler metal indicates the formation of an intermetallic layer of TiC.     

关于建立故障树的新探索

在诊断专家系统开发的基础上，讨论了故障树的建立问题，基于对系统特性的分析，提出了通过系统故障传递关系和故障传递可达关系，由计算机自动生成故障树的方法，并以大型过程系统为例，从理论上论证了该方法的可行性及其优点。     

Involvement of both L- and N-type voltage-dependent Ca2+ channels in KCl- and veratridine-evoked transmitter release from non-adrenergic, non-cholinergic nerves in the rabbit iris sphincter muscle

To determine which types of voltage-dependent Ca2+ channels mediate tachykinin release in the isolated rabbit iris sphincter muscle, we examined the effects of several Ca2+ channel modulators on contractions induced by either an elevation of the extracellular KCl concentration or application of the Na+ channel activator veratridine. Contractions caused by either 45.9 mM KCl or veratridine (10 microM) were inhibited by spantide (10 microM), a tachykinin receptor antagonist, and capsaicin (10 microM), a tachykinin-depleting agent, but were not changed by atropine. Nicardipine, an L-type Ca2+ channel blocker, inhibited contractions induced by KCl and veratridine in a concentration-dependent manner. omega-Conotoxin GVIA (1 microM), an N-type Ca2+ channel blocker, inhibited only contractions induced by lower concentrations of KCl, both when applied alone and when combined with nicardipine. Bay K 8644, an L-type Ca2+ channel activator, caused a spantide- and nicardipine-sensitive contraction in muscles partially depolarized with 15.9 mM KCl, and enhanced contractions induced by 15.9 mM KCl and veratridine (2 microM). omega-Agatoxin IVA (0.3 microM), a P-type voltage-dependent Ca2+ channel blocker, did not affect contractions induced by either KCl or veratridine. Contractions induced by exogenous substance P were not modified by any of the Ca2+ channel blockers or by Bay K 8644. These results suggest that, in the rabbit iris sphincter muscle. L- and N-type voltage-dependent Ca2+ channels are involved in neurotransmitter release from tachykininergic nerves elicited by high KCl and by veratridine.     

Direct observation of the crystal-growth transition in undercooled silicon

Using an electromagnetic levitation facility with a laser heating unit, silicon droplets were highly undercooled in the containerless state. The crystal morphologies on the surface of the undercooled droplets during the solidification process and after solidification were recorded live by using a high-speed camera and were observed by scanning electron microscopy. The growth behavior of silicon was found to vary not only with the nucleation undercooling, but also with the time after nucleation. In the earlier stage of solidification, the silicon grew in lateral, intermediary, and continuous modes at low, medium, and high undercoolings, respectively. In the later stage of solidification, the growth of highly undercooled silicon can transform to the lateral mode from the nonlateral one. The transition time of the sample with 320 K of undercooling was about 535 ms after recalescence, which was much later than the time where recalescence was completed.     

Characterization of Silicon Carbide–Silicon Nitride Composite Ultrafine Particles Synthesized Using a CO2 Laser by Silicon-29 Magic Angle Spinning NMR and ESR

The structure of silicon carbide–silicon nitride (SiC–Si₃N₄) composite particles synthesized using a CO₂ laser was studied by magic angle spinning nuclear magnetic resonance (MAS-NMR) and electron spin resonance (ESR). The structure around Si atoms changed by introducing N. C atoms around Si were substituted by N atoms, and N-rich configurations around Si atoms increased stepwise as the N content increased. The low N content composite particles consisted of mainly SiC phase containing dissolved N. N atoms were partly present in β-SiC microcrystal and partly in the grain boundary layer in the particle. N atoms were tetrahedrally surrounded by four Si atoms in β-SiC microcrystal and were trivalent state bonded to three Si atoms in the grain boundary layer. The high N content particles consisted of SiC, Si₃N₄, and amorphous phases, whose amount depended on N content.     

High-performance carbon counter electrode for dye-sensitized solar cells

Here, we reported that a new carbon electrode prepared with an activated carbon was superior to a Pt sputtered electrode as the counter electrode of dye-sensitized solar cells. The photovoltaic performance was largely influenced by the roughness factor of carbon electrode. The open-circuit voltage increased by about 60 mV using the carbon counter electrode compared to the Pt counter electrode because of positive shift of the formal potential for I₃⁻/I⁻ couple.     

Selective vapor phase hydroformylation of ethylene over cluster-derived cobalt catalyst

Vapor phase hydroformylation of ethylene was studied with silica-supported metal catalysts. A cobalt metal catalyst derived from Co₂(CO)₈ gave propanal and its derivatives in as high selectivity of about 36% as Rh/SiO₂ catalyst under the reaction conditions of 1.1 MPa of a gas-mixture of ArCOC₂H₄H₂ = 1333 at 423–503 K. On the other hand, conventional cobalt catalysts derived from cobalt nitrate, chloride, or acetate, and other noble metal catalysts (Pd/SiO₂ and Ir/SiO₂) produced mainly ethane.     

Three-dimensional display of the bronchi using helical CT

The purpose of this study was to evaluate the clinical usefulness of three-dimensional (3D) images of the bronchi obtained using helical CT. Thirteen patients with lung cancer, one with tracheal diverticulum, and one with bronchial amyloidosis were examined. The CT scanner employed was the Toshiba Xforce. The helical CT scan cycle consisted of 20 continuous rotations, each requiring 1.5 sec, for a total scanning time of 30 sec. Scans were obtained using a 5-mm X-ray beam width, a 5-mm/1.5 sec couchtop sliding speed, and a 2-mm reconstruction interval. 3D images were reconstructed using a CEMAX VIPstation. The optimal lower and upper threshold CT values for 3D images of the bronchi were -650 and -100 HU, respectively, and 3D images clearly depicted endobronchial lesions. Cartilage crescents were also demonstrated, but longitudinal and circular mucosal folds could not be visualized. In conclusion, 3D images of the bronchi acquired using helical CT were useful in evaluating endobronchial lesions.