Quantum Transport Simulation of Silicon-Nanowire Transistors Based on Direct Solution Approach of the Wigner Transport Equation

In this paper, we present a self-consistent and 3D quantum simulator for Si-nanowire transistors based on the Wigner function model and multidimensional Schrodinger-Poisson algorithm. To achieve a sufficient numerical accuracy for calculating subthreshold current, we introduced a third-order differencing scheme for discretizing the drift term in the Wigner transport equation. By comparing with semiclassical Boltzmann and nonequilibrium Green's function approaches, the validity of the present simulator is confirmed. We also demonstrate that the source-drain tunneling is a critical physical phenomenon related to a scaling limit of nanowire devices, and the semiclassical simulation measurably underestimates a minimum gate length.     

Ion beam induced luminescence of polyethylene terephthalate foils under MeV H and He ion bombardment

The evolution of the ion beam induced luminescence (IBIL) of the polyethylene terephthalate (PET) foils was studied under the irradiation of H and He ions of MeV energy. The optical and chemical changes of the samples were also examined by photo-stimulated luminescence and optical absorption measurements after the irradiation. A prominent broad emission peak of IBIL appeared at around 380 nm, and its intensity monotonically decreased during the ion irradiation. The decay curves of the emission intensity were quantitatively explained as a function of the electronic energy deposition of the incident H and He ions. On the contrary, to the decrease of the main emission peak, a growth of new peaks was observed in the wavelengths between 500 and 600 nm.     

Investigation for Necessity of Dispersivity and Tortuosity in the Dusty Gas Model for a Binary Gas System in Soil

Diffusion, dispersion, and advection are important processes in multi-gas systems in soils. To date, both Fick's model and the Dusty Gas (DG) model have been used to model the movement of gases in these systems. Dispersion is included in the dispersion-advection equation with Fick's Model for the movement of gases in gas-phase of soil, yet the movement of gases in multi-component gas-soil systems is considered to be expressed more accurately by the DG model than by Fick's model. However to date, no study has investigated the necessity of considering dispersion in the Dusty Gas (DG) model. We carried out column experiments for nitrogen-methane, nitrogen-carbon dioxide, and carbon dioxide-methane binary gas systems in sandy soil, and also did simulations on the same systems using both Fick's model and the DG model. A comparison of the results of the column experiments with our simulations confirmed that there was no need to consider the dispersion in the advection-diffusion equations with the DG model when the velocity of gas was 0.05-0.4 cm/s in Toyoura sand. Furthermore, our experiments and simulations with the DG model showed that, rather than dispersion, tortuosity should be taken into account in application of the DG model to the above condition.     

Mixing speed-controlled gold nanoparticle synthesis with pulsed mixing microfluidic system

Gold nanoparticles with diameters of a few tens of nanometer and a narrow size distribution were synthesized using a pulsed mixing method with a microfluidic system which consists of a Y-shaped mixing microchannel and two piezoelectric valveless micropumps. This mixing method enables control of the mixing speed of gold salts and reducing agent by changing the switching frequency of the micropumps, which was our focus to improve the particle size distribution, which is an essential parameter in gold nanoparticle synthesis. In the proposed method, the mixing time was inversely proportional to the switching frequency and the minimum mixing time was 95 ms at a switching frequency of 200 Hz. During synthesis experiments, the mean diameter of the synthesized gold nanoparticles was found to increase, and the coefficient of variation of particle size was found to decrease with decreasing mixing time. We successfully improved the coefficient of variation to less than 10% for a mean diameter of around 40 nm.     

Synthesis of charge transporting block copolymers containing 2,7-dimethoxycarbazole units for light emitting device

The block copolymers consisting of 2,7-dimethoxycarbazole- and oxadiazole-containing segments as hole and electron transporting units, respectively, were synthesized by NMRP manner. OLED devices were fabricated using block copolymer, random copolymer, and polymer blend for matrix of the emitting layer with Ir(ppy)₃ as a phosphorescent dopant in order to investigate morphological effect on the performance. From the finding that the block copolymer system overwhelmed the others in EQE, we assumed that a morphology with dimethoxycarbazole units assembled to the surface of PEDOT:PSS played a considerable role for effective recombination of charges as well as sufficient charge injection into the emitting layer.     

Structure and properties of poly(vinyl alcohol)/κ‐carrageenan blends

Blends of a commercial atactic poly(vinyl alcohol) (a‐PVA) derived from vinyl acetate and κ‐carrageenan were prepared by mixing the aqueous solutions of both samples. Blend films prepared by casting were transparent. In the DSC curves of the blend films, the endothermic peaks shifted to lower temperature with an increase of the content of κ‐carrageenan. The Young's modulus and the strength at break increased with an increase of the content of a‐PVA. As the standing temperature of the blend solutions decreased, the gelation region increased also at high content of carrageenan. In the amorphous regions of blend films, a‐PVA and κ‐carrageenan were miscible. © 2001 Society of Chemical Industry     

Applying heat integration total site based pinch technology to a large industrial area in Japan to further improve performance of highly efficient process plants

“Area-wide pinch technology” which consists of R-curve analysis and Site Source Sink Profile (SSSP) analysis, was applied to Kashima industrial area, one of the biggest heavy chemical complexes in Japan. This case study demonstrates that despite the very high efficiency of the individual sites in the complex, there is a huge amount of energy saving potential through energy sharing among the various sites. In addition it was found that appropriate use of the available pinch technology tools and techniques allows an industrial area of enormous scale and complexity to be analysed conveniently. This has resulted in practical area-wide energy saving projects being proposed and implemented.