Processing of ethanol fermentation broths by Candida krusei to separate bioethanol by pervaporation using silicone rubber‐coated silicalite membranes

BACKGROUND: Pervaporation employing ethanol‐permselective silicalite membranes as an alternative to distillation is a promising approach for refining low‐concentration bioethanol solutions. However, to make the separation process practicable, it is extremely important to avoid the problems caused by the adsorption of succinate on the membrane during the separation process. In this work, the pervaporation of an ethanol fermentation broth without succinate was investigated, as well as the influence of several fermentation broth nutrient components. RESULTS: Candida krusei IA‐1 produces an extremely low level of succinate. The decrease in permeate ethanol concentration through a silicone rubber‐coated silicalite membrane during the separation of low‐succinate C. krusei IA‐1 fermentation broth was significantly improved when compared with that obtained using Saccharomyces cerevisiae broth. By treating the fermentation broth with activated carbon, bioethanol was concentrated as efficiently as with binary mixtures of ethanol/water. The total flux was improved upto 56% of that obtained from the separation of binary mixtures, compared with 43% before the addition of activated carbon. Nutrients such as peptone, yeast extract and corn steep liquor had a negative effect on pervaporation, but this response was distinct from that caused by succinate. CONCLUSION: For consistent separation of bioethanol from C. krusei IA‐1 fermentation broth by pervaporation, it is useful to treat the low nutrient broth with activated carbon. To further improve pervaporation performance, it will be necessary to suppress the accumulation of glycerol. Copyright © 2009 Society of Chemical Industry     

Group feature extraction based on matrix factorization from long-range office-logging data

To increase the productivity of knowledge workers, it is necessary to manage their organization so that they are motivated to collaborate with each other for their synergy. However, it is difficult for managers to grasp the explicit interactions of workers in the organization all the time. Owing to advanced communications technology, and the reduced size and improved capabilities of computers, we are able to record group behaviors as logging data in the office. The aim of this study is to extract features of group behavior from long-range office-logging data. We apply principal component analysis to the data matrix whose element is the mean travel velocity calculated from an individual’s trajectory per day. The results demonstrate the feasibility of our approach, since nontrivial informative group features can be extracted.     

Distributed Social Dilemma With Competitive Meta-players

In our research, we propose the solution to the 'Distributed Social Dilemma' as an extended social dilemma model. In this model, in order to prevent the players from becoming freeloaders, we introduce competitive meta-players. Our purpose is to evaluate, through agent-based simulation, how the meta-players effect to increase cooperation amongst players in a distributed social dilemma. In order to examine our proposed solution, we introduce the preference of the players to cooperate as the measure of the effect of the meta-players. On the basis of the result of the simulations, we show the degree of the effect of the competitive meta-players on the distribution social dilemma.     

Difference in the detection limits of flaws in the depths of multi-layered and continuous aluminum plates using low-frequency eddy current testing

We examined the difference in the detection limits of flaws in the depths of multi-layered and continuous aluminum plates using low-frequency eddy current testing. The detection limits were measured by using a magneto-resistive sensor. Comparing the frequency of an applied magnetic field, the detection limit at 50 Hz is deeper than that at 1 kHz. Comparing the sample structure, the detection limit in the multi-layered samples is deeper than that in the continuous samples. These results are likely due to the differences in the skin depth and conductivity of the sample.     

Effect of cellular inositol content on ethanol tolerance of Saccharomyces cerevisiae in sake brewing

The effect of cellular inositol content on the ethanol tolerance of sake yeast was investigated. In a static culture of strain K901 in a synthetic medium, when cells were grown in the presence of inositol in limited amount (L-cells), the inositol content of cells decreased by one-third that of cells grown in the presence of inositol in sufficient amount (H-cells). L-cells exhibited a higher death rate constant than H-cells in the presence of 12-20% ethanol, while no difference in specific ethanol production rate in the presence of 0-18% ethanol between the two cell types was observed. L-cells leaked more intracellular components, such as nucleotides, phosphate and potassium, in the presence of ethanol than H-cells. L-cells exhibited a lower intracellular pH value than H-cells, which represented the lowering of cell vitality by the decrease in H(+) extrusion activity. Furthermore, the plasma membrane H(+)-ATPase activity of L-cells was approximately one-half of that of H-cells. Therefore, it was considered that the decrease in viability in the presence of ethanol due to inositol limitation results from the lowering of H(+)-ATPase activity, which maintains the permeability barrier of the yeast membrane, ensuring the homeostasis of ions in the cytoplasm of yeast cells. It is assumed that the lowering of H(+)-ATPase activity due to inositol limitation is caused by the change in lipid environment of the enzyme, which is affected by inositol-containing glycerophospholipids such as phosphatidylinositol (PI), because in the PI-saturated mixed micellar assay system, the difference in H(+)-ATPase activity between L- and H-cells disappeared. In the early stage of sake mash, inositol limitation lowers the ethanol tolerance due to the decrease in H(+)-ATPase activity as in static culture. In the final stage of sake mash, the disruption of the ino1 gene responsible for inositol synthesis, resulted in a decrease in cell density. Furthermore, the ino1 disruptant, which was not capable of increasing the cellular inositol level in the final stage, exhibited a significantly higher methylene blue-staining ratio than the parental strain. It was suggested that the yeast cellular inositol level is one of the important factors which contribute to the high ethanol tolerance implied by the increased cell viability in the presence of ethanol.     

Highly reliable a‐IGZO TFTs on a plastic substrate for flexible AMOLED displays

We have successfully reduced threshold voltage shifts of amorphous In–Ga–Zn–O thin‐film transistors (a‐IGZO TFTs) on transparent polyimide films against bias‐temperature stress below 100 mV, which is equivalent to those on glass substrates. This high reliability was achieved by dense IGZO thin films and annealing temperature below 300 °C. We have reduced bulk defects of IGZO thin films and interface defects between gate insulator and IGZO thin film by optimizing deposition conditions of IGZO thin films and annealing conditions. Furthermore, a 3.0‐in. flexible active‐matrix organic light‐emitting diode was demonstrated with the highly reliable a‐IGZO TFT backplane on polyimide film. The polyimide film coating process is compatible with mass‐production lines. We believe that flexible organic light‐emitting diode displays can be mass produced using a‐IGZO TFT backplane on polyimide films.     

Phase relation and defect structures of nonstoichiometric U4O9±y and UO2+x at high temperatures

Phase relations in the composition range from $\text{UO}{}_{\mathrm{2+x}}$ to $\text{U}{}_3\text{O}{}_{\mathrm{8?z}}$ were studied by electrical-conductivity measurements and X-ray diffraction in the ranges $\text{1025°C ? T ? 1140°C}$ and . The plot of log σ versus log showed straight lines with distinct slopes, which corresponded to four regions ($\text{UO}{}_{\mathrm{2+x}}$, $\text{U}{}_4\text{O}{}_{\mathrm{9?y}}$, $\text{U}{}_4\text{O}{}_{\mathrm{9+y}}$ and $\text{U}{}_3\text{O}{}_{\mathrm{8?z}}$). The existence of the hyperstoichiometric $\text{U}{}_4\text{O}{}_{\mathrm{9+y}}$ phase was suggested in the temperature range from 1025 to 1126°C. The peritectoid temperature ($\text{U}{}_4\text{O}{}_{\mathrm{9\pm y}}\text{= UO}{}_{\mathrm{2+x}}\text{+ U}{}_3\text{O}{}_{\mathrm{8?z}}$) was estimated to be present between 1126 and 1131°C. The partial free enthalpies and entropies for the two-phase equilibrium ($\text{U}{}_4\text{O}{}_{\mathrm{9+y}}\text{+ U}{}_3\text{O}{}_{\mathrm{8?z}}$, and $\text{U}{}_4\text{O}{}_{\mathrm{9?y}}\text{+ UO}{}_{\mathrm{2+x}}$) were calculated and compared with previous results. From the dependence of the electrical conductivity on the oxygen partial pressure the nonstoichiometric defect structures of $\text{UO}{}_{\mathrm{2+x}}$ and $\text{U}{}_4\text{O}{}_{\mathrm{9\pm y}}$ were interpreted as consisting of doubly charged oxygen interstitials (O_i'') and doubly charged oxygen vacancies (V_O''). At room temperature, the homogeneity range of the U₄O₉ phase was investigated with a Debye-Scherrer camera.     

Structural changes of glass-ceramics of the Cu2O-Al2O3-SiO2 system on heating in air

The behaviour of copper ions in low thermal expansion glass-ceramics prepared from Cu₂O · Al₂O₃ ·_nSiO₂ glasses, or in-spodumene type Cu₂O · Ae₂O₃ ·nSiO₂ crystals included in the glass-ceramics on heating in air was investigated. On hewing at 300 to 500° C, the copper ions behaved as in the corresponding glasses. Cuprous ions in the glass-ceramics or-spondumene type crystals were oxidized into the cupric state, and at the same time an equal amount of cuprous ions to those oxidized were expelled out of the specimen for the requirement of electrical charge neutrality and then reacted with oxygen to form CuO on the surface. The oxidation of cuprous ions and the decrease of the copper content of the-spondumene type crystals brought about a considerable decrease in the lattice spooings.     

Recovery of population inversion in an erbium-doped fiber amplifier observed by temporally resolving amplified spontaneous emissions

We report on the recovery of population inversion in a CW-pumped erbium-doped fiber amplifier. Spontaneous emissions after the input of signal pulses were temporally resolved. The recovery time for population inversion was estimated to be a few hundred microseconds. The pump power and signal width dependences of the recovery were measured. We discuss the dependences by applying an analytical formula derived for the temporal evolution of population inversion.     

Reversible and Precisely Controllable p/n‐Type Doping of MoTe2 Transistors through Electrothermal Doping

Precisely controllable and reversible p/n‐type electronic doping of molybdenum ditelluride (MoTe₂) transistors is achieved by electrothermal doping (E‐doping) processes. E‐doping includes electrothermal annealing induced by an electric field in a vacuum chamber, which results in electron (n‐type) doping and exposure to air, which induces hole (p‐type) doping. The doping arises from the interaction between oxygen molecules or water vapor and defects of tellurium at the MoTe₂ surface, and allows the accurate manipulation of p/n‐type electrical doping of MoTe₂ transistors. Because no dopant or special gas is used in the E‐doping processes of MoTe₂, E‐doping is a simple and efficient method. Moreover, through exact manipulation of p/n‐type doping of MoTe₂ transistors, quasi‐complementary metal oxide semiconductor adaptive logic circuits, such as an inverter, not or gate, and not and gate, are successfully fabricated. The simple method, E‐doping, adopted in obtaining p/n‐type doping of MoTe₂ transistors undoubtedly has provided an approach to create the electronic devices with desired performance.