Enhanced production of hydroxymethylfurfural from fructose with solid acid catalysts by simple water removal methods

This paper demonstrates two simple ways to increase 5-hydroxymethylfurfural (HMF) yield (selectivity) in fructose dehydration with various solid acid catalysts. One is a water removal from the reaction mixture by a mild evacuation at 0.97 × 10⁵ Pa; it increases HMF yield for various catalysts (heteropoly acid, zeolite, and acidic resin). The removal of water suppresses two undesired reactions: the hydrolysis of HMF to levulinic acid and the reaction of partially dehydrated intermediates to condensation products. The other method is a decrease in the particle (bead) size of the resin (Amberlyst-15). The crushed and sieved Amberlyst-15 powder in a size of 0.15–0.053 mm shows 100% HMF yield at high fructose concentration (50 wt.% in DMSO), which is to our knowledge the highest yield to date. Near-infrared spectroscopic characterization of adsorbed water suggests that the enhanced yield can be caused by an improved removal of adsorbed water in a small-size resin particle.     

Microbial degradation of cyanobacterial cyclic peptides

Bacterial strain B-9 possesses hydrolytic enzymes capable of degrading microcystins (MCs) and nodularin that are toxic cyclic peptides produced by cyanobacteria. In the present study, the degradation activities of the cell extract of B-9 against non-toxic cyanobacterial cyclic peptides other than the MCs and nodularin were investigated, and the degradation products were analyzed by liquid chromatography/ion trap tandem mass spectrometry (LC/ITMS). It was confirmed that B-9 could also degrade these cyanobacterial cyclic peptides by hydrolysis of their peptide bonds. These results indicated that this bacterium possesses a very unique hydrolytic activity that can degrade structurally different cyclic peptides and that this may be effective for the detoxification of hazardous cyclic peptides.     

Effect of treatment of activated carbon fiber cloth electrodes with cold plasma upon performance of electric double-layer capacitors

Charge/discharge behavior of electric double-layer capacitors composed of activated carbon fiber cloth (ACFC) electrodes and an organic electrolyte was investigated. The modification of the ACFC electrodes was performed using cold plasma generated in argon-oxygen atmosphere. The effect of the cold plasma treatment of the ACPC electrodes on the capacitor performance was discussed on the basis of the physical and chemical properties of the ACFC surface such as pore radius distribution and surface atom concentration.     

Piezoelectric properties of langasite group based on the ionic size of cation

As langasite A₃BC₃D₂O₁₄ compounds group with piezoelectric properties has no phase transition up to the melting point of 1400–1500 °C, they have been applied for the combustion pressure sensor. As they also have a larger electromechanical coupling factor compared to quartz and nearly the same temperature stability as quartz, the surface acoustic wave (SAW) filters are expected based on the digital transformation of wider bandwidth and higher-bit rates. In the case of three-element compounds such as [R₃]_A[Ga]_B[Ga₃]_C[GaSi]_DO₁₄ (R=La, Pr and Nd), the piezoelectric constant increases with the ionic radius R. In the case of four-element compounds such as [A₃]_A[B]_B[Ga₃]_C[Si₂]_DO₁₄ (A=Ca or Sr, B=Ta or Nb), |d₁₁| and k₁₂ values as a function of A_L/B_L ratio showed a linear relationship completely. There are two effects for the substitutions of A- and B-site cations: the substitution of Sr for Ca brings expansion toward [100] and enlargement in |d₁₁| and k₁₂. On the other hand, as the substitution of Ta for Nb brings not much change, the properties are similar. In this study, five-element compounds such as La_3?xSr_xTa_yGa_5?x+ySi_1+x?2yO₁₄ (0≤x≤3, 0≤y≤1) solid solutions analysed by a single crystal X-ray diffraction are compared with the three- and four-element compounds on the coordinates of oxygen ions. As the coordinates positions are located on the extended line of coordinate positions on the three-element compounds as increasing ionic radius of R-ions in A-site, the piezoelectric properties |d₁₁| and k₁₂ are expected become large.     

Investigation of continuous-wave and Q-switched microchip laser characteristics of Yb:YAG ceramics and crystals

Continuous-wave and passively Q-switched microchip laser performance of Yb:YAG ceramics and single-crystals was investigated. Highly efficient continuous-wave Yb:YAG laser performance was observed at 1030 nm and 1049 nm for both Yb:YAG ceramics and crystals with different transmissions of output couplers. The laser performance of Yb:YAG ceramic is comparable to that of Yb:YAG single crystal. Meanwhile, the laser performance of laser-diode pumped Yb:YAG/Cr⁴⁺:YAG all-ceramics- and all-crystals-combination passively Q-switched microchip lasers were investigated. Sub-nanosecond laser pulses with peak power over 150 kW were obtained with different Yb:YAG/Cr⁴⁺:YAG combinations. Linearly polarized laser was observed in Yb:YAG/Cr⁴⁺:YAG all-crystals combination and circular polarized laser was obtained in Yb:YAG/Cr⁴⁺:YAG all-ceramics combination. The best laser performance was obtained with Yb:YAG/Cr⁴⁺:YAG all-crystals combination.     

Synchronal measurement of flow structure and heat transfer of impingement jet

This paper will present the characteristics of flow behavior and thermal field of both free and
impingement jet issued from a circular orifice nozzle at Re=8900.The flow behavior of a single round
jet and impingement jet was observed by smoke flow visualization recorded by a high speed camera
using 5000 frame per second.Heat transfer coefficient on the impingement surface was measured by
means of infrared camera （TVS-8500,Avio） with a two-dimensional array of Indeum-Antimony （In Sb）
sensors varying in the separation distance between the nozzle and the target plate.The heat transfer
coefficient changes in time and spatial.Therefore,the root mean square distribution of the heat
transfer was obtained from the data.As a result,it was confirmed that the longitudinal vortex was
observed outside of the ring vortex,and then the longitudinal vortex was penetrated in the jet
flow.Moreover,the high value of root mean square of the heat transfer coefficient has spread radially
in stripy manner,which is caused as the results of the longitudinal vortexes flowing in the radial
direction on the impingement plate.     

Electric transfer function model of switched reluctance motors and model‐based current control design

This paper presents a current control design for switched reluctance motors (SRMs). The electric transfer characteristic of the motors is studied first. Their transfer function is shown to be expressible by a pure resistive component, which is not constant but varies depending on the motor current and speed. The current control design for SRMs follows the classical design technique used for DC machines, where the zeros of the PI controller cancel the poles of Ls+R. Because the transfer function of SRMs does not have any poles, an I controller is suitable for them. The integral gain should be adjusted in order to compensate the nonlinearity, that is, the variation in the equivalent resistor of the SRMs' transfer function. The values of the integral gain are tuned and tabulated for the motor speed and current. Simulation and experiment demonstrate that the current and speed of the SRMs present good responses without dependence on the motor speed and current. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(1): 51–59, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20987     

Effect of static magnetic field on a thermal conductivity measurement of a molten droplet using an electromagnetic levitation technique

Recently, a novel method of measuring the thermophysical properties, particularly thermal conductivity, of high-temperature molten materials using the electromagnetic levitation technique has been developed by Kobatake et al. [H. Kobatake, H. Fukuyama, I. Minato, T. Tsukada, S. Awaji, Noncontact measurement of thermal conductivity of liquid silicon in a static magnetic field, Appl. Phys. Lett. 90 (2007) 094102]; this method is based on a periodic laser-heating method, and entails the superimposing of a static magnetic field to suppress convection in an electromagnetically levitated droplet. In this work, to confirm the fact that a static magnetic field really suppresses convection in a molten silicon droplet in an electromagnetic levitator, numerical simulations of convection in the droplet and periodic laser heating in the presence of convection have been carried out. Here, the convections driven by buoyancy force, thermocapillary force due to the temperature dependence of the surface tension on the melt surface, and electromagnetic force in the droplet were considered. As a result, it was found that applying a static magnetic field of 4 T can suppress convection in a molten silicon droplet enough to measure the real thermal conductivity of molten silicon.     

Colorless polyimides derived from 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride,self-orientation behavior during solution casting,and their optoelectronic applications

A novel cycloaliphatic monomer for polyimides (PI), 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride (H′-PMDA) is proposed in this work. H′-PMDA shows high polymerizability with various diamines in contrast to its isomer, i.e., conventional hydrogenated pyromellitic dianhydride (H-PMDA) and leads to highly flexible and colorless PI films with very high T_g's. In particular, the combinations with rigid structures of diamines give rise to PIs with significantly decreased coefficients of thermal expansion (CTE) owing to high extents of in-plane chain orientation induced by thermal imidization, whereas the H-PMDA-based counterparts do not. The decreased CTE reflects structural rigidity/linearity of the H′-PMDA-based diimide units as supported by liquid crystallinity observed in the corresponding model compound. Solution casting of a chemically imidized PI derived from H′-PMDA and 2,2′-bis(trifluoromethyl)benzidine (TFMB) results in a lower CTE than that of the thermally imidized counterpart, suggesting the presence of a self-orientation phenomenon during solvent evaporation. The mechanism is proposed in this work. H′-PMDA/TFMB and its copolymer systems can be useful as plastic substrates in image display devices and/or novel coating-type optical compensation films.     

A THERMOELASTOPLASTIC SOLUTION FOR A CIRCULAR SOLID CYLINDER SUBJECTED TO HEATING AND COOLING

Abstract

This paper presents a theoretical study of the stresses in an infinite circular solid cylinder subjected to rapid surface heating and cooling. A quasistatic, uncoupled, thermoelastoplastic analysis based on the incremental theory of plasticity is formulated, and a numerical procedure is developed for a method of successive elastic solutions. The material of the cylinder is assumed to have temperature-dependent properties and to be characterized by the Romberg-Osgood stress-strain relation. The transient and residual stress distributions are discussed in detail, along with variations of the equivalent stress and plastic strain with time.