Simulation of driver fatigue monitoring via blink rate detection,using 65 nm CMOS technology

This paper proposes a system to detect and measure blink rate to determine fatigue levels. The method involved analysing specific frames to determine that a blink occurred, and then monitoring the time between successive blinks. The program was simulated in python using a Raspberry Pi Zero and a standard USB camera. For the blink rate detection block, a gate level schematic was implemented in Cadence software using 65 nm CMOS technology. The design was based around an asynchronous 6-bit based edge counter which was designed using D-flip-flops. The simulation calculated the average blink rate and compared this to the most recent blink rate. The outcome would determine if an alarm signal should be sent to the alarm. The system consumed 130 μA from a 1.2 V power supply.     

2D and 3D numerical simulation of the wind-rotor/nacelle interaction in an atmospheric boundary layer

Two-dimensional axisymmetric and three-dimensional steady turbulent flow computations around two horizontal-axis wind turbines (Nordex N80 and Jeumont J48) are carried out to investigate the wind-rotor/nacelle interaction and quantify its effects on the wind speed at the nacelle anemometry. The actuator disk concept has been used to model the action of the blades. For both turbines, the geometry of the nacelle was reproduced as faithfully as possible. The terrain was represented by an appropriate law of the wall to account for roughness with particular attention paid to the boundary conditions in order to reproduce the neutral atmospheric boundary layer. The calculated velocity field in the vicinity of the nacelle exhibits good agreement with available experimental data. The results also show that for a complex nacelle geometry, like that of the N80, a three-dimensional calculation is necessary to obtain a good prediction of the velocity field in the near wake. The hub height effect is evaluated for the J48 by raising the nacelle from a height of 36 to 60 m. No significant impact is noted on the ratio nacelle wind speed/freestream wind speed.     

Modeling, design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 2, ventilated concrete slab

This paper is the second of two papers that describe the modeling and design of a building-integrated photovoltaic-thermal (BIPV/T) system thermally coupled with a ventilated concrete slab (VCS) adopted in a prefabricated, two-storey detached, low energy solar house and their performance assessment based on monitored data. The VCS concept is based on an integrated thermal-structural design with active storage of solar thermal energy while serving as a structural component - the basement floor slab (∼33 m²). This paper describes the numerical modeling, design, and thermal performance assessment of the VCS. The thermal performance of the VCS during the commissioning of the unoccupied house is presented. Analysis of the monitored data shows that the VCS can store 9-12 kWh of heat from the total thermal energy collected by the BIPV/T system, on a typical clear sunny day with an outdoor temperature of about 0 °C. It can also accumulate thermal energy during a series of clear sunny days without overheating the slab surface or the living space. This research shows that coupling the VCS with the BIPV/T system is a viable method to enhance the utilization of collected solar thermal energy. A method is presented for creating a simplified three-dimensional, control volume finite difference, explicit thermal model of the VCS. The model is created and validated using monitored data. The modeling method is suitable for detailed parametric study of the thermal behavior of the VCS without excessive computational effort.     

Experimental study on the compressive resistance of stress-relieved solid round steel members

The Canadian Standard for Antenna Towers and Antenna Supporting Structures, CSA-S37-01, specifies expressions for the compressive resistance of solid rounds based on the Structural Stability Research Council (SSRC) Column Curves for non-solid-round members and the results from experimental investigations on the compressive resistance of solid rounds carried out back to 1965. Similar Standard in USA (TIA/EIA-222-G.0) specifies design criteria for such members as derived from the superseded AISC-LRFD-94 Standard, which is independent of the shape of the member cross-section. The European Standard, Eurocode 3, provides column curves for the compressive resistance of various structural steel members, and assumes the applicability of one of them to solid rounds. As such, it is necessary to conduct an experimental study on solid round stress-relieved steel members to refine the available design equations for such members. This paper provides a summary of the literature review on solid rounds as well as a recent test program conducted on stress-relieved steel solid rounds. Correlation between the results from these tests and the current practice for the design of solid rounds is investigated. The paper concludes with a proposed compressive resistance equation for economical design of such members.     

Estimated daily intake of pesticide residues exposure by vegetables grown in greenhouses in Al-Qassim region,Saudi Arabia

Residues of 23 pesticides (13 insecticides, 3 fungicides, 3 herbicides, 2 acaricides, 1 rodenticide and 1 nematicide) in 160 different vegetable samples cultivated under greenhouse conditions and collected from 4 major supermarkets located in Al-Qassim region, Saudi Arabia were monitored. A multiresidue method was carried out by gas chromatography with mass spectrometry (GC–MS). Residues were found in 89 samples. Fifty four samples were found above the maximum residue levels (MRLs). The most frequently found pesticides were carbaryl followed by biphenyl and then carbofuran. MRL values exceeded most often in cabbage (11 samples) followed by squash, green pepper and carrot (7 samples each) followed by cucumber and lettuce (6 samples each), egg-plant (5 samples) and then tomato (4 samples). Also, cabbage showed the highest contamination rates (16 samples), followed by carrot, cucumber and green pepper (12 samples each), squash (11 samples), lettuce and tomato (9 samples each) and egg-plant (8 samples). The highest concentrations were determined in lettuce followed by squash, cabbage and carrot. Al-Qassim region population’s average daily intake (EDI) has been estimated between 2 × 10^?5 and 0.597 μg/kg body weight/day and the hazard index (EDI/acceptable daily intake (ADI)) less than the unity for the tested compounds. The data illustrated that the intakes are much lower than the ADIs and the exposure level to whole pesticides was below the level to produce health risk. The data indicated also the need for regular monitoring programs for pesticide residues in vegetables cultivated under greenhouse conditions, at the national level, to protect consumers’ health.     

Multiconsistency and Robustness with Global Constraints

We propose a natural generalization of arc-consistency, which we call multiconsistency: a value v in the domain of a variable x is k-multiconsistent with respect to a constraint C if there are at least k solutions to C in which x is assigned the value v. We present algorithms that determine which variable-value pairs are k-multiconsistent with respect to several well known global constraints. In addition, we show that finding super solutions is sometimes strictly harder than finding arbitrary solutions for these constraints and suggest multiconsistency as an alternative way to search for robust solutions.Supported by the Danish Research Agency (grant # 272-05-0081).Basic Research in Computer Science, funded by the Danish National Research Foundation.     

Effect of Fiber-Reinforced Polymer Wraps on Corrosion Activity and Concrete Cracking in Chloride-Contaminated Concrete Cylinders

This paper presents the results of an experimental study designed to investigate the effect of fiber-reinforced polymer (FRP) wraps on corrosion activity and concrete cracking in chloride-contaminated concrete cylinders. Thirty-five concrete cylinders, each having 102?mm diameter and 204?mm height, concentrically reinforced with one steel reinforcing bar, were subjected to accelerated corrosion exposure for 80?days. Test parameters included level of applied potential, presence of FRP wraps, and bar diameter. The corresponding current and concrete expansion were continuously monitored throughout the corrosion exposure. At the end of the test, the steel bars were extracted, cleaned of rust, and weighed to determine the actual steel mass loss. The results showed that, for the same applied fixed potential, FRP wraps effectively reduced the corresponding current, the concrete expansion, and the steel mass loss. For the same applied potential, the current density increased as the bar diameter decreased. For the same corrosion depth, the circumferential expansion of the cylinder caused by corrosion decreased as the concrete cover-to-bar diameter ratio (c/d) increased.     

Distributed Construction of Connected Dominating Set in Wireless Ad Hoc Networks

Connected dominating set (CDS) has been proposed as virtual backbone or spine of wireless ad hoc networks. Three distributed approximation algorithms have been proposed in the literature for minimum CDS. In this paper, we first reinvestigate their performances. None of these algorithms have constant approximation factors. Thus these algorithms cannot guarantee to generate a CDS of small size. Their message complexities can be as high as O(n ²), and their time complexities may also be as large as O(n ²) and O(n ³). We then present our own distributed algorithm that outperforms the existing algorithms. This algorithm has an approximation factor of at most 8, O(n) time complexity and O(nlogn) message complexity. By establishing the (nlogn) lower bound on the message complexity of any distributed algorithm for nontrivial CDS, our algorithm is thus message-optimal.     

Compact high-pulse-energy ultraviolet laser source for ozone lidar measurements

An all solid-state Ti:sapphire laser differential absorption lidar transmitter was developed. This all-solid-state laser provides a compact, robust, and highly reliable laser transmitter for potential application in differential absorption lidar measurements of atmospheric ozone. Two compact, high-energy-pulsed, and injection-seeded Ti:sapphire lasers operating at a pulse repetition frequency of 30 Hz and wavelengths of 867 and 900 nm, with M2 of 1.3, have been experimentally demonstrated and their properties compared with model results. The output pulse energy was 115 mJ at 867 nm and 105 mJ at 900 nm, with a slope efficiency of 40% and 32%, respectively. At these energies, the beam quality was good enough so that we were able to achieve 30 mJ of ultraviolet laser output at 289 and 300 nm after frequency tripling with two lithium triborate nonlinear crystals.     

Disposition of the flavonoid quercetin in rats after single intravenous and oral doses

The pharmacokinetic and mean time tissue distribution parameters, after a single 50-mg/kg dose of quercetin administered as intravenous bolus, oral solution, and oral suspension, were determined using rat as an animal model. Following intravenous administration, the elimination rate constant and the elimination half-life were found to be 0.0062 min^-1 and 111 min, respectively. Examining the mean time tissue distribution parameters reflected a strong binding affinity of the drug molecules to both plasma and tissue proteins. In addition, the low permeability rate of drug molecules in the peripheral system was demonstrated. Following the oral administration of the drug, the extent of absorption was greater from solution than from suspension. Moreover, the solution showed a shorter T_max and a higher C_max than suspension. The absolute bioavailability for the solution was 0.275 and that for suspension was 0.162. The mean residence time (MRT) and the mean absorption time (MAT) were higher for suspension, reflecting the need for dissolving the drug in order to be absorbed. The mean (in-vivo) dissolution time (MDT_in-vivo) was 34.5 min. Thus, an oral quercetin formulation that can readily form a drug solution in the gastrointestinal tract may enhance the absorption of the drug.