Intrinsic Elastic, Dielectric, and Piezoelectric Losses in Lead Zirconate Titanate Ceramics Determined by an Immittance-Fitting Method

The material coefficients of "soft" and "hard" lead zirconate titanate (PZT) ceramics were determined as complex values by the nonlinear least-squares-fitting of immittance data measured for length-extensional bar resonators. The piezoelectric d -constant should be a complex value to obtain a best fitting between observed and calculated results. Because the elastic, dielectric, and piezoelectric losses determined in this process were not "intrinsic" losses, a calculation process to evaluate the "intrinsic" losses was proposed. It was confirmed that the intrinsic losses were smaller than the corresponding extrinsic losses. The intrinsic piezoelectric loss existed in both soft and hard PZTs; ∼50% of the loss of piezoelectric d -constant was derived from the elastic and dielectric losses. The most notable difference between the soft and hard PZTs was observed in their elastic losses.     

EFFECT OF SURFACE ROUGHNESS ON THE ADHESION OF ELECTROLESSLY PLATED PLATINUM TO POLY(ETHYLENE TEREPHTHALATE) FILMS

Poly(ethylene terephthalate) films were treated with aqueous sodium hydroxide solutions of different concentrations for various times. The rate of weight loss increased with the addition of a swelling agent (methylene chloride) or a cationic surfactant. The surface roughness of the treated films was determined from atomic force microscopy (AFM) and pore diameter was obtained from scanning electron microscopy (SEM). In general, surface roughness was found to increase with increasing weight loss for the treated films. A maximum roughness was obtained for samples with a weight loss of approximately 15-20%, beyond which the roughness of the samples decreased. The addition of methylene chloride and surfactant resulted in an almost two-fold increase in the roughness for all treatment times investigated. The adhesion of electrolessly plated platinum film was dependent on the contact area produced by chemical treatment. Treatments producing smaller diameter pores of greater depth gave better adhesion.     

Enantiomer-based specificity in pheromone communication by two sympatricGnathoirichus species (Coleoptera: Scolytidae)

The aggregation pheromone ofGnathotrichus retusus was isolated and identified as (S)-(+)-sulcatol (6-methyl-5-hepten-2-ol). In laboratory and field experiments,G. retusus responded to (S)-(+)-sulcatol, but not to (±)-sulcatol, which was attractive to the sympatric species,G. sulcatus. G. sulcatus did not respond to optically pure (S)-(+)-sulcatol, but began to respond when 1% (R)-(–)-sulcatol was present in an enantiomeric mixture.Research supported by the National Science Foundation, U.S.A. (Grant BMS-74-13643), and the Natural Sciences and Engineering Research Council of Canada (Co-op grant A0243 and Operating Grant A3881 and A3785).     

Manufacture of Granulated Chitosan

Conditions for dry-wet spinning of spherical chitosan granules 0.5–2.0 mm in diameter into a two-layer spinning bath consisting of immiscible liquids are proposed, where an organic liquid, decane in particular, is the upper layer of the bath while a solution of ammonium hydroxide is the lower layer. The possibility of obtaining chitosan microgranules from 2 to 30 µm in diameter by emulsification of a solution of chitosan in decane or a solution of an anion-active surfactant — sodium dodecyl sulfate — is demonstrated. The effect of the molecular weight and concentration of the solutions on the granule-forming power of chitosan is established. A 6% solution of chitosan with a molecular weight of 200 kD is recommended for further studies.__________Translated from Khimicheskie Volokna, No. 5, pp. 26–29, January–February, 2005.     

基于云计算的 Excel 数据处理效率优化研究*

为了提高Excel软件的数据处理效率,需建立一个能满足高精确度、高效率、易使用的计算环境。论文建立圆柱螺线优化插值模型,在Excel中通过五组测斜数据计算井眼曲率,再根据云计算可弹性增加计算节点的特点,将Sympho‐ny DE并行软件搭建在本地私有云环境下,通过增加计算节点数目对比运算效率与计算精度。结果表明：随着计算节点数的增加,运算效率大大提高,计算结果更加精确。     

Characteristics of polyvinylpyrrolidone-layered silicate nanocomposites prepared by attrition ball milling

Polyvinylpyrrolidone (PVP)/sodium montmorillonite (MMT) nanocomposites prepared via the solution intercalation method were investigated by UV/vis, SEM, X-ray diffraction, TEM, FT-IR and PLM (polarized light microscopy). PVP/MMT nanocomposites show exfoliation below 20 wt% MMT and intercalation above this concentration. Nanocomposites retain good optical clarity and increased thermal resistance with MMT content. The compatibility between PVP and MMT and their enhanced properties may be explained by hydrogen bonding interactions. In addition, the nanocomposites prepared under more rigorous mixing conditions show better transparency because the smaller particle sizes are induced. In addition, the study on optically clear PVP/MMT suspensions helps one to understand how optical anisotropy of MMT is affected by the existence of polymer in aqueous solution.     

低雾化低挥发性汽车用新型聚氨酯泡沫塑料助剂

康普顿公司开发了一系列适用于消除或减少汽车内饰件中胺扩散或雾化的添加剂，其中包括快速、有效的生产用零扩散催化剂和低雾化表面活性剂。该系列添加剂能大大降低泡沫制品中的胺扩散，与异氰酸酯和多元醇原料能组成最佳组合，以保持良好的泡沫物理性能。     

Synthesis and physicochemical characterization of amphiphilic block copolymer self‐aggregates formed by poly(ethylene glycol)‐block‐poly(ϵ‐caprolactone)

Diblock copolymers with different poly(ε‐caprolactone) (PCL) block lengths were synthesized by ring‐opening polymerization of ε‐caprolactone in the presence of monomethoxy poly(ethylene glycol) (mPEG‐OH, MW 2000) as initiator. The self‐aggregation behaviors and microscopic characteristics of the diblock copolymer self‐aggregates, prepared by the diafiltration method, were investigated by using ¹H NMR, dynamic light scattering (DLS), and fluorescence spectroscopy. The PEG–PCL block copolymers formed the self‐aggregate in an aqueous environment by intra‐ and/or intermolecular association between hydrophobic PCL chains. The critical aggregation concentrations of the block copolymer self‐aggregate became lower with increasing hydrophobic PCL block length. On the other hand, reverse trends of mean hydrodynamic diameters were measured by DLS owing to the increasing bulkiness of the hydrophobic chains and hydrophobic interaction between the PCL microdomains. The partition equilibrium constants (K_v) of pyrene, measured by fluorescence spectroscopy, revealed that the inner core hydrophobicity of the nanoparticles increased with increasing PCL chain length. The aggregation number of PCL chain per one hydrophobic microdomain, investigated by the fluorescence quenching method using cetylpyridinium chloride as a quencher, revealed that 4–20 block copolymer chains were needed to form a hydrophobic microdomain, depending on PCL block length. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3520–3527, 2006     

均三甲苯氧化合成间二甲基苯甲酸的宏观动力学

研究了由均三甲苯液相富氧催化氧化制备间二甲基苯甲酸的动力学规律 ,考察了反应时间、温度、通气量和氧浓度等因素对均三甲苯和间二甲基苯甲酸浓度的影响 ,根据双膜理论建立了该反应的宏观动力学模型 ,并由实验数据拟合出模型参数 ,经检验模型计算值能较好地与实验数据相吻合     

Miscibility of poly(methoxymethyl methacrylate) and poly(methylthiomethyl methacrylate) with poly(vinylidene fluoride)

Summary The miscibility behaviour of poly(methoxymethyl methacrylate) (PMOMA) and poly(methylthiomethyl methacrylate) (PMTMA) with poly(vinylidene fluoride) (PVDF) was examined by differential scanning calorimetry. PMOMA/PVDF blend system was judged to be miscible on the bases of the presence of a single, composition-dependent glass transition for the blend and a pronounced melting point depression of the PVDF component. Furthermore, lower critical solution temperature (LCST) behaviour was observed for all PMOMA/PVDF blends. PMTMA/PVDF blends were found to be immiscible. Based on the melting point depression of PVDF in PMOMA/PVDF blends, the interaction parameter B was found to be -14.5 J/cm³.