Comparison of the effects of nonlinear gain and weak opticalfeedback on the dynamics of semiconductor lasers

The influence of nonlinear gain and optical feedback on the dynamics of single-mode semiconductor lasers are numerically investigated based on the Lang and Kobayashi model. It is well known that the nonlinear gain tends to stabilize the dynamics, while the optical feedback tends to increase the instabilities. In this paper, we study the behavior of the attractors when the feedback level k and the gain saturation coefficient ε vary and show that the effects of these parameters are surprisingly opposite. For example, we find that the route to chaos that the external cavity modes follow for increasing k is reversed for increasing ε in an almost identical manner. When the feedback increases the modes follow the usual quasi-periodic route and turn into torus. If k continues to increase, the torus become chaotic attractors as the result of several period-doubling bifurcations or a third Hopf bifurcation. Further increase of k causes the chaotic attractors to lose stability, Contrarily, if the value of the parameter ε is increased, the attractors recover their stability and reverse the route becoming simple torus again. If ε is increased further, the torus reverse the quasi-periodic route and turn into stable modes again. We also find that on the contrary to k, the parameter ε enhances the stability region of an attractor. We show that the feedback level above which a limit cycle emerges from a stable mode, the feedback level above which a torus emerges from a limit cycle, and the feedback level above which a chaotic attractor loses stability are all increasing functions of ε     

Characterization and modeling of a noncollinearly phase-matchedfemtosecond optical parametric oscillator based on KTA and operating tobeyond 4 μm

We describe the design and operation of a critically phase-matched femtosecond optical parametric oscillator based on KTA. By employing a small pump-signal noncollinear angle, tuning of the idler to beyond 4 μm is achieved using a Ti:sapphire pump laser. A Gaussian-beam model is described which can be used to identify the optimal noncollinear phase-matching geometry. Idler and signal pulses are characterized fully both temporally and spectrally and interferometric autocorrelation data at 3.5 μm showing idler pulses of only eight optical cycles duration are presented     

Fast DCT algorithm with fewer multiplication stages

A novel fast DCT scheme with reduced multiplication stages and fewer additions and multiplications is proposed. The proposed algorithm is structured so that most multiplications tend to be performed at the final stage, which reduces the propagation error that could occur in the fixed-point computation. Minimisation of the multiplication stages can further decrease the error     

Reuse efficiency for non-uniform traffic distributions in CDMAsystems

An exact and simple method to evaluate the frequency reuse efficiency for the reverse link of cellular CDMA systems over a non-uniform traffic distribution is presented. This method is based on a traffic redistribution and decomposition process and on standard curves with which partial reuse efficiencies are obtained and conveniently added to give the final parameter     

Virtual circuit connection method for RSVP multicasting supportingheterogeneous receivers on the ATM network

The authors suggest a novel virtual circuit connection method based on the reverse traversing technique to minimise the waste of network bandwidth resources, when the Internet protocol multicast is interoperated using the resource reservation protocol over an asynchronous transfer mode network. Simulation results show that, as the number of receivers increases, the bandwidth requirements on all links of the network of the proposed scheme become more advantageous than those of other conventional methods     

FATIGUE CRACK GROWTH UNDER MODE II LOADING

Abstract— The behavior of fatigue crack growth for low and medium carbon steels, an austenitic stainless steel and an aluminum alloy under pure Mode II loading was investigated experimentally, using cruciform specimens. The results show that under pure Mode II loading, fatigue crack propagation has three possibilities, namely, bifurcation into two branches, propagation along the original Mode II direction, and the mixture of these two situations, depending on the material. The growth rate da/dN vs. ΔK_II relation for Mode II propagation is similar to a Pans type law for Mode I growth. Fractographic observations by optical microscopy and SEM were made also on all specimens tested. When a crack branched, striations parallel to the crack front which were often associated with Mode I fatigue crack growth were observed and long marks parallel to the crack propagation direction were also found for slanted fracture surfaces. When a crack propagated along the original Mode II direction, many frictional marks parallel to the crack propagation direction were observed.     

Influence of age and health on immune functions and trace elements

Apparently healthy elderly donors were screened according to a simple protocol that included clinical examination and the determination of hematological and biochemical values. This screening was performed to detect subclinical alterations which might interfere with immune responses and trace element status. The elderly were divided into two groups. The first group consisted of 22 (age 76 +/- 1 years) positively selected elderly (PSE), i.e. healthy subjects with no hematological and laboratory alterations, the second one comprised 13 (age 75 +/- 1 years) negatively selected elderly (NSE). Data were then compared with those obtained from 40 (age 35 +/- 2 years) healthy young controls. In both groups of elderly donors, plasma zinc levels were normal, while plasma copper concentrations were increased. Intracellular values of zinc and copper in mono- and polymorphonuclear cells from both groups of elderly were within reference limits. After in vitro activation, granulocyte chemiluminescence activity was impaired only in NSE. A decrement in the number of circulating CD3 lymphocytes and an increase in CD8d, CD57 cells were found in PSE, while NSE showed an increased number of CD3,DR cells and CD8d, CD57, CD8b,CD57 and CD16,CD56 positive cells. Our results indicate that only plasma copper levels were affected by age, whereas subclinical alterations in hematological or biochemical values appear to impair immune responses in the elderly.     

Novel NMDA antagonists: replacement of the pyridinium ring of 6,11-ethanobenzo[b]quinolizinium cations with heteroisoquinolinium cations

Replacement of the pyridinium ring of 6,11-ethanobenzo[b]quinolizinium cations with thiazolium (4a and 4b) and N-methylimidazolium (4c and 4d) resulted in equipotent compounds in the [3H]TCP binding assay. The corresponding N-methyl-1,2,4-triazolium analogs were less potent in this assay. The thiazolium derivative 4b, with a Ki = 2.9 nM, is being evaluated as a possible neuroprotective N-methyl-D-aspartic acid (NMDA) antagonist.     

Formula for two-carrier third-order intermodulation distortion in semiconductor laser diodes

Formulas for the two-carrier third-order intermodulation distortion in semiconductor lasers have been reported by many authors. The authors refine the formula further and illustrates the difference in results arising from the refinement, for typical laser parameters.<>     

Minimum effort factor approach for sensor-based control of a four-joint 6-dof redundant manipulator

A sensor-driven control model and a minimum effort control algorithm in terms of time and energy expended during the execution of a movement strategy are described and validated for a multijointed cooperating robotic manipulator. Considering smooth, human-like (anthropomorphic) movements, using joint motion profiles achievable in real time as well as sensory information from all joints, and evaluating the total work expended by each manipulator joint during the execution of a movement strategy, a minimum effort motion trajectory is synthesized to precisely and efficiently position the robotic arm end-effector. This sensor-based approach significantly reduces the computational requirements for such cooperative motion. The minimum effort control algorithm generates several human-like arm movement strategies and selects the best strategy on the basis of expendable effort. The algorithm has an inherent basis to deal with obstacles in an efficient way. Detailed examples are described from the simulation studies. © 1994 John Wiley & Sons, Inc.