Application of functionally graded material for solid insulator in gaseous insulation system

Functionally graded materials (FGM) have spatial distribution of a material property in order to achieve efficient stress control. An application of the FGM to a solid insulator (spacer) for a gaseous insulation system, like gas insulated switchgear, is expected to improve electric field (E-field) distribution around the spacer. In this paper, we describe the applicability of the FGM spacer to gas insulated power equipment. In the FGM spacer, we gave spatial distribution of dielectric permittivity to control the E-field distribution inside and outside the spacer. This paper includes following key results for the applications of the FGM. Firstly, E-field simulation results when applying the FGM by a finite element method are presented, in which we show the effective reduction of the maximum field strength by applying the FGM. Next, a fabrication technique of the FGM spacer sample with not only step-by-step but also continuous changes of permittivity is presented by use of centrifugal force. Finally, dielectric breakdown tests using FGM samples which are accurately controlled the spatial distribution of permittivity are carried out under lightning impulse voltage applications. The test result indicates the increase of breakdown voltage (BDV). From these results, we verified the applicability and the fabrication technique of FGM spacer for improvement of the dielectric strength in the gaseous insulation system.     

Effect of radial curvature of magnetic media on glide avalanche

Spacing loss due to micro-waviness and curvature effects in the radial direction of a disk was investigated via numerical simulations and measurements. New techniques based on interferometry and laser scanning were employed to measure radius of curvature (ROC) and to reconstruct the profiles at the outer edge of a disk. A good correlation between ROC values and fly height degradation was obtained, and ROC less than 50 m clearly showed the deterioration in fly height by as much as 1.5 nm. The new measurement techniques proved to be an important means to improve substrate manufacturing processes.     

Leak-tightness characteristics concerning the containment structures of the HTTR

The containment structures of the HTTR consist of the reactor containment vessel, the service area, and the emergency air purification system, which minimise the release of fission products in postulated accidents, which lead to fission product release from the reactor facilities. The reactor containment vessel is designed to withstand the temperature and pressure transients and to be leak-tight in the case of a rupture of the primary concentric hot-gas duct, etc. The pressure inside the service area is maintained at a negative pressure by the emergency air purification system. The emergency air purification system will also remove airborne radioactivity and will maintain a correct pressure in the service area.The leak-tightness characteristics of the containment structures are described in this paper. The measured leakage rates of the reactor containment vessel were enough less than the specified leakage limit of 0.1%/d confirmed during the commissioning tests and annual inspections. The service area was kept in a way that the design pressure becomes well below its allowable limitation by the emergency air purification system, which filters efficiency of particle removal and iodine removal well over the limited values.The obtained data demonstrate that the reactor containment structures were fabricated to minimise the release of fission products in the postulated accidents with fission product release from the reactor facilities.     

Electrochemical behaviors of uranium and plutonium at simultaneous recoveries into liquid cadmium cathodes

Experiments were conducted on simultaneous recovery of uranium and plutonium electrochemically into laboratory scale liquid cadmium cathodes (LCCs) at different U/Pu ratios in the salt phase, and the influence of the salt composition on the recovered amounts of uranium and plutonium, the morphologies of uranium and plutonium in the LCC, and the behavior of americium, which is present as a decay product of plutonium-241, were examined. As a result, it was shown that there is a threshold in the U/Pu ratio in the salt phase between 1/4.3 and 1/1.73 for the successful simultaneous recovery of uranium and plutonium up to 10 wt% in the LCC at high current efficiencies. In the LCC, uranium and plutonium existed in the forms of intermetallic compounds, (U, Pu)Cd₆ and (U, Pu)Cd₁₁, and also pure uranium metal. It was also revealed that americium associates with plutonium according to the separation factor during the LCC operation.     

Syndiotactic‐specific radical polymerization of N‐isopropylacrylamide in toluene at low temperatures in the presence of silyl alcohols

The radical polymerization of N‐isopropylacrylamide was carried out in toluene at low temperatures in the presence of silyl alcohols, such as triethylsilanol. Poly(N‐isopropylacrylamide) with a racemo dyad content of 75% was obtained at ? 80 °C with a 4:1 triethylsilanol to monomer ratio loading. NMR analysis suggests that the mechanism for syndiotactic induction, in the presence of silyl alcohols, may be similar to that observed with alkyl alcohols. In this case, a 1:2 complex formation, via hydrogen bonding interactions, leads to the induction of syndiotactic specificity. Copyright © 2012 Society of Chemical Industry     

Performance evaluation of a visual management system for effective case transfer

Visual management (VM) has become an important management tool for the smooth management of global supply chains. The target of VM systems is to harmonise communication. For example, in the production sector, VM provides solutions for various issues such as the quick detection of an abnormal situation, continuous maintenance of a safe environment, prevention of an operation miss and knowledge sharing. However, the development of VM cases has been uncontrolled, which is considered problematic. A system for the strategic enhancement of VM is necessary. Recognising this need, this study presents a model for the performance evaluation of relevant cases and validates the utility of the model, which is the initial step in developing a strategic enhancement system for VM.     

Swelling Pressure of Wet Rice Grains Estimated from Distribution Coefficients of Saccharides

The apparent density and porosity of four rice cultivars, Koshihikari, Yumepirika, Habutaemochi, and Kitayukimochi, decreased and increased, respectively, with the increasing temperature in the range of 5 °C to 60 °C. Especially large changes in both apparent density and porosity were observed at 60 °C, which can be ascribed to the starch gelatinization of rice. The swelling pressures of wet rice grains were estimated to be 7.5, 6.3, 6.2, and 5.9 MPa at 25 °C for Koshihikari, Yumepirika, Habutaemochi, and Kitayukimochi, respectively, from the distribution coefficients of solutes with different molar volumes. Rice grains having higher amylose content exhibited a weak tendency toward higher swelling pressure. The distribution coefficients of fructose for the Koshihikari and Habutaemochi cultivars were larger at higher temperatures, but the temperature dependence of the swelling pressure was not significant for both cultivars. These results suggested that the increase in the distribution coefficient was caused by the gradual relaxation of the interior structure of rice with increasing temperature.     

Synthesis of New Pb-Based 1222 Cuprates Containing Phosphorus, (Pb0.75P0.25)Sr2(RE2–x–y Ce x Sr y )Cu2O z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y)

New Pb-based 1222 cuprates containing phosphorus have been synthesized in the (Pb_0.75P_0.25)Sr₂- (RE_2–x–y Ce _x Sr _y )Cu₂O _z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y) systems. The almost-single phase samples are obtained for 0.5≤x≤1.0 and y=0.1 in the cases of RE = Nd, Dy, Ho, Er, Tm, Yb and Y, while for 0.3≤x≤1.0 and y=0.1 in the cases of RE = Sm, Eu and Gd. The samples crystallize in a tetragonal lattice, the lattice parameters a and c are decreasing with the decrease of the ionic radius of the RE element. Even after annealing under 143 atm O₂ atmosphere at 400 °C, almost all the samples with the common values x=0.5 and y=0.1 are semiconductors with a transport process followed by three-dimensional variable range hopping. However, the samples of RE = Sm, Eu and Gd, which are of almost single 1222 phase, even for x=0.3 and y=0.1, show superconductivity with the onsets at about 25 K, 20 K and 22 K, respectively. Through this study, we find very important procedure for discovery of new superconducting 1222 compound.