Preparation of surfactant-free vinyl polymers by conventional emulsion polymerization using hydrolysable emulsifiers

Emulsion polymerizations of several vinyl monomers, styrene, methyl methacrylate, butyl methacrylate, butyl acrylate, and vinyl acetate, in water using alkali–hydrolysable cationic surfactants with a betaine ester group (1-alkoxycarbonylmethyl)trimethylammonium chlorides, as emulsifiers were carried out and properties of the resulting latices and the polymers recovered by hydrolysis and salting out were investigated. There were little influences of the surfactants and monomers used here on the polymerizations, forming stable and monodisperse latices with a mean diameter of ca. 70 nm and giving a high molecular weight of polymers at high yields. All polymers were precipitated and recovered by adding a small amount of sodium hydroxide into the latex solutions contained little amount of ionic species. Solvent-cast films of the polymers were found to have surfaces as hydrophobic as those for the corresponding pure polymers prepared by bulk polymerization.     

Improvement of a Measurement System for Surface Loss Rate of Ozone

Ozone molecules present in high-purity oxygen as a feed gas interact with surfaces and oxygen molecules in an enclosed container. Therefore, some of the ozone molecules are destroyed and the density of ozone decreases with time. An experimental system has been constructed to monitor the temporal decrease in ozone density in a container based on the HgI 254 nm photoabsorption method. Our investigation is focused on the dependence of the effective lifetime of ozone on the wall material at various gas pressures. During the experiments, distortion of the measured decay curves often caused by instabilities in the mercury lamp intensity. We thus attempted to build a simple setup that eliminates the effect of long-term intensity drift. This setup is based on light source intensity monitoring by a separate photodetector and data correction software. This article describes the setup of the experimental apparatus, the results including some preliminary experiments and the temporal variation of the surface loss rate of ozone by repeated measurement along with inspections of the wall surface by Auger electron spectroscopy.     

Synthesis of cyclic poly(methyl methacrylate) by the intramolecular cyclization of α-amino, ω-carboxyl heterodifunctional poly(methyl methacrylate)

Summary α-Amino, ω-carboxyl heterodifunctional poly(methyl methacrylate) was prepared by a living anionic polymerization of methyl methacrylate using N,N'-diphenylethylenediamine monolithium amide and succinic anhydride as an initiator and terminator, respectively. Its intramolecular cyclization was carried out to obtain a well-defined cyclic poly(methyl methacrylate). Received: 27 June 2001/Accepted: 16 July 2001     

A 31P-NMR study of peroxo species formed during oxidation of cyclohexene with hydrogen peroxide in tri-n-butylphosphate catalyzed by heteropolyacids

In the oxidation of cyclohexene with H₂O₂in monophasic tri-n-butylphosphate (TBP) solution catalyzed by Keggin-type 12-heteropolyacids, i.e., H₃PMo_12-xW _x O₄₀(x=0–12), several peroxo species were observed by ³¹P-NMR spectroscopy in lower field than the original heteropolyacids. Their composition varied regularly with that of the starting catalyst. The P-containing peroxo species formed was deduced as [PM₄O₈(O₂)₈]^3-(M = Mo, W). The peroxo species formed more easily with a decrease in the W content, x of H₃PMo_12-xW_xO₄₀. It was further indicated from the reactivity with cyclohexene and the comparison with catalytic performance that W-rich peroxo species were catalytically more active than Mo-rich peroxo species for the oxidation of cyclohexene in this reaction system.     

A highly transparent and thermally stable copolymer of 1‐adamantyl methacrylate and styrene

Thermal and optical properties of copolymers of 1‐adamantyl methacrylate (AdMA) and styrene (St) prepared by free radical polymerization in the bulk are investigated. The copolymer forms an azeotrope when the composition is AdMA/St = 55/45 mol%. The glass transition temperature and decomposition temperature of the azeotropic copolymer are 170 and ca 340 °C, respectively. The refractive index increases nonlinearly with St content from 1.522 to 1.591. The light scattering loss at 633 nm is 28.1 dB km^?1, which is less than half of that of polystyrene. The total optical loss including molecular vibrational absorption, which is evaluated using a copolymer‐based optical fiber, is 292–645 dB km^?1 at 500–700 nm. These values correspond to transmittances of 86–93% for a 1 m optical path length. © 2014 Society of Chemical Industry     

Profiling and Imaging of Phospholipids in Brains of Abcd1‐Deficient Mice

ABCD1 is a gene responsible for X‐linked adrenoleukodystrophy (X‐ALD), and is critical for the transport of very long‐chain fatty acids (VLCFA) into peroxisomes and subsequent β‐oxidation. VLCFA‐containing lipids accumulate in X‐ALD patients, although the effect of ABCD1‐deficiency on each lipid species in the central nervous system has not been fully characterized. In this study, each phospholipid and lysophospholipid species in Abcd1‐deficient mice brains were profiled by liquid chromatography‐mass spectrometry. Among the phospholipid and lysophospholipid species that are significantly more enriched in Abcd1‐deficient mice brains, VLCFA were present in 75, 15, 5, 4, and 1 species of phosphatidylcholine, phosphatidylethanolamine, sphingomyelin, lysophosphatidylcholine, and lysophosphatidylethanolamine, respectively. Most VLCFA were incorporated at the sn‐1 position of phosphatidylcholine and phosphatidylethanolamine. Among the phospholipid species that are significantly less enriched in Abcd1‐deficient mice brains, odd‐numbered saturated or mono‐unsaturated fatty acyl moieties are contained in all phosphatidylcholine species. In addition, a number of phosphatidylglycerol, phosphatidylinositol, and phosphatidylserine species contained highly unsaturated fatty acyl moieties. Intriguingly, 44:1 phosphatidylcholine with VLCFA was mainly distributed in the gray matter, such as the cortex, but not in the white matter in the cerebrum and cerebellum. These results show that ABCD1‐deficiency causes metabolic alternation of long‐chain fatty acids and VLCFA. Moreover, our results imply a molecular mechanism for the incorporation of saturated or monounsaturated VLCFA into the sn‐1 position of phospholipids, and also indicate that the distribution of phospholipids with VLCFA may correlate with the development of X‐ALD.     

Design of new catalysts for ecological high-quality transportation fuels by combinatorial computational chemistry and tight-binding quantum chemical molecular dynamics approaches

Recently, we introduced a concept of combinatorial chemistry to computational chemistry and proposed a new method called “combinatorial computational chemistry”, which enables us to perform a theoretical high-throughput screening of catalysts. In the present paper, we reviewed our recent application of our combinatorial computational chemistry approach to the design of new catalysts for high-quality transportation fuels. By using our combinatorial computational chemistry techniques, we succeeded to predict new catalysts for methanol synthesis and Fischer–Tropsch synthesis. Moreover, we have succeeded in the development of chemical reaction dynamics simulator based on our original tight-binding quantum chemical molecular dynamics method. This program realizes more than 5000 times acceleration compared to the regular first-principles molecular dynamics method. Electronic- and atomic-level information on the catalytic reaction dynamics at reaction temperatures significantly contributes the catalyst design and development. Hence, we also summarized our recent applications of the above quantum chemical molecular dynamics method to the clarification of the methanol synthesis dynamics in this review.     

Euphorbia tirucalli β-Amyrin Synthase: Critical Roles of Steric Sizes at Val483 and Met729 and the CH–π Interaction between Val483 and Trp534 for Catalytic Action

The functions of Val483, Trp534, and Met729 in Euphorbia tirucalli β-amyrin synthase were revealed by comparing the enzyme activities of site-directed mutants against that of the wild type. The Gly and Ala variants with a smaller bulk size at position 483 predominantly afforded monocyclic camelliol C, which suggested that the orientation of the (3S)-2,3-oxidosqualene substrate was not appropriately arranged in the reaction cavity as a result of the decreased bulk size, leading to failure of its normal folding into the chair–chair–chair–boat–boat conformation. The Ile variant, with a somewhat larger bulk, afforded β-amyrin as the dominant product. Intriguingly, various variants of Trp534 exhibited significantly decreased enzymatic activities and provided no aberrantly cyclized products, although the aromatic Phe and Tyr residues were incorporated and the steric sizes of the aliphatic residues were altered. Therefore, the Trp534 residue does not stabilize the transient cation through a cation–π interaction. Furthermore, the Trp residue, with the largest steric bulk among all natural amino acids, is essential for high enzymatic activity. Robust CH–π complexation between the Val483 and Trp534 residues is proposed herein. Altering the steric bulk at the Met729 position afforded the pentacyclic skeletons. Thus, Met729 is positioned at the E-ring formation site. More detailed insights into the functions of the Val483, Trp534, and Met729 residues are provided by homology modeling.     

Optical Amplification at 1.3 μm in a Praseodymium-Doped Sulfide-Glass Fiber

Praseodymium-doped glasses were prepared in the Ga-Na-S (GNS) system and their optical properties were studied. A single-mode fiber with an attenuation loss of 1.2 dB/m at a wavelength of 1.31 μm was fabricated using an extrusion method, and the amplification characteristics were measured in the bidirectional pumping configuration. We demonstrated a gain coefficient of 0.81 dB/mW at a wavelength of 1.34 μm, which is the highest we have ever reported, and achieved a net gain of 32 dB for a pump power of 90 mW. Highly efficient optical amplification at a wavelength of 1.3 μm was demonstrated in the praseodymium-doped GNS fiber.