Convective transfer processes in chemically stable and reacting liquids with an internal structure

Dynamic processes are studied in media with softly and hardly internal destroyable configurations. A method is examined for the measurement of properties of media with spatial separation of the chemical transformation stages and thermal hydrodynamic measurements.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 53, No. 5, pp. 781–789, November, 1987.     

Fabrication of Strain-Relaxed Si<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript>x</Subscript>/Si(001) Buffer Layers of Low Surface Roughness

The results are presented of the fabrication of strain-relaxed graded Si_{1 − x} Ge_x/Si(001) buffer layers with a maximum Ge fraction of about 0.25 that have a low density of threading dislocations (<10⁶ cm⁻²) and low surface roughness. The buffer layers are grown by atmospheric-pressure hydride CVD. It is found that chemical mechanical polishing can reduce their surface roughness to a level comparable with that of the original Si(001) substrates. It is shown that the polished buffer layers can serve as substrates for MBE-grown SiGe/Si heterostructures.__________Translated from Mikroelektronika, Vol. 34, No. 4, 2005, pp. 243–250.Original Russian Text Copyright © 2005 by Vostokov, Drozdov, Krasil’nik, Kuznetsov, Novikov, Perevoshchikov, Shaleev.     

Low-temperature pyroelectric properties of Li<Subscript>2</Subscript>SO<Subscript>4</Subscript>

The pyroelectric properties of lithium sulfate have been studied theoretically on the hypothesis of a pseudosymmetry of the structure of its polar phase. Analytical expressions are proposed for the temperature dependences of its pyroelectric polarization and pyroelectric coefficient at low temperatures and near the polymorphic transformation. The pyroelectric and piezoelectric coefficients of a polar crystal are shown to be in direct proportion.     

Etching behavior of CVD zinc selenide in inorganic acid solutions

Chemical interaction between polished surfaces of polycrystalline zinc selenide and inorganic acid solutions of various concentrations has been studied.     

Micromechanism of corrosion fracture of the plates of heat exchangers

We have studied the micromechanism of corrosion fracture of heat-transfer plates of a heat exchanger. The operation of heat exchangers under conditions of contamination of the plates with a sediment from water leads to their local corrosion under the sediment. The conditions of operation of the heat exchangers being equal, heat-transfer plates made of AiSi316Ti steel worked 2.36 times as long as those of AiSi304L steel. The corrosion fracture of plates under the sediment began from pitting initiation near nonmetallic inclusions of a certain nature. Afterwards, these pittings built up into corrosion spots by the mechanism of stress corrosion and hydrogen embrittlement. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 1, pp. 110–116, January–February, 2007.     

A New Generation of Magnetic Roll Separators Based on Rare-Earth Magnets for Concentration and Purification of Weakly Magnetic Materials

Magnetic roll separators on rare-earth magnets are suitable for removing iron impurities from various materials. The advantages of these magnetic separators over traditional ones are demonstrated. __________ Translated from Steklo i Keramika, No. 5, p. 33, May, 2005.     

Synthesis,characterization and properties of functionalized styrene–maleimide copolymers

New functionalized styrene–maleimide copolymers were prepared by free radical copolymerization of styrene (St) and N‐4‐carboxybutylmaleimide (NBMI) in chloroform, using 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monomer and copolymer characterization was carried out by ¹H‐ and ¹³C‐NMR. Copolymer composition was determined by elemental analysis and Fourier‐transform infrared (FTIR) spectroscopy. The glass transition temperature (from DSC) and the thermogravimetric analysis (TGA) of the copolymers were consistent with the thermal behavior and stability observed for alternating St–maleimide copolymers. St–NBMI copolymers crosslinked with divinylbenzene (DVB) were also synthesized and their cation exchange properties evaluated in order to assess the capacity of the new copolymers to bind metallic ions. Copyright © 2005 Society of Chemical Industry     

Location of structural sections from within a highly distorted complex line drawing

Complex and highly distorted line drawings are produced by subjects attempting the Rey Complex Figure test, a clinical test of neuropsychological assessment. However, the marking scheme conventionally employed can be subjective and unreliable. In this paper, the first stages in automating this scoring system are investigated using a robust technique to locate a reduced set of scoring sections and a knowledge-based system that employs spatial metrics and fuzzy approximation techniques. Testing the technique using clinical data produced encouraging results that support the argument that this is a feasible approach for implementing a fully automated system, and that in its current state, can be immediately applied in a semi-automated system.