Characterization of poly(vinyl pyrrolidone‐co‐isobutylstyryl polyhedral oligomeric silsesquioxane) nanocomposites

Poly(vinyl pyrrolidone‐co‐isobutyl styryl polyhedral oligomeric silsesquioxane)s (PVP–POSS) were synthesized by one‐step polymerization and characterized using FTIR, high‐resolution ¹H‐NMR, solid‐state ¹³C‐NMR, ²⁹Si‐NMR, GPC, and DSC. The POSS content can be controlled by varying the POSS feed ratio. The T_g of the PVP–POSS hybrid is influenced by three main factors: (1) a diluent role of the POSS in reducing the self‐association of the PVP; (2) a strong interaction between the POSS siloxane and the PVP carbonyl, and (3) physical aggregation of nanosized POSS. At a relatively low POSS content, the role as diluent dominates, resulting in a decrease in T_g. At a relatively high POSS content, the last two factors dominate and result in T_g increase of the PVP–POSS hybrid. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2208–2215, 2004     

Preparation and properties of (BATB–ODPA) polyimide–clay nanocomposite materials

A series of polymer–clay nanocomposite (PCN) materials consisting of 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene–4,4′‐oxydiphthalic anhydride (BATB–ODPA) polyimide (PI) and layered montmorillonite (MMT) clay were successfully prepared by an in situ polymerization reaction through thermal imidization up to 300°C. The synthesized PCN materials were subsequently characterized by Fourier‐Transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of material composition on thermal stability, mechanical strength, molecular permeability and optical clarity of bulk PI and PCN materials in the form of membranes were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), molecular permeability analysis (GPA) and ultraviolet‐visible (UV/VIS) transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1072–1079, 2004     

Synthesis of chiral polymers containing the acetoxybornyl group and their applications on the asymmetric induction

Optically active 2-endo-actoxy-5-endo-bornyl methacrylate (ABMA) was prepared from (+)-camphor. The homopolymerization of ABMA and copolymerization of ABMA with achiral methyl methacrylate (MMA) or styrene (St) were carried out with 2,2′-azobisisobutyronitrile (AIBN) in benzene. Effects of temperature, solvents, and reaction time on the copolymerization were discussed. The monomer reactivity ratios(r₁, r₂) for poly(ABMA-co-MMA) and poly(ABMA-co-St) and Q and e values for the chiral ABMA in the copolymerization systems were evaluated by the Fineman—Ross method. The absolute value of the specific rotation of poly(ABMA-co-MMA) increased with increasing ABMA unit content. A small deviation from linearity was observed, which suggests that asymmetry is not introduced into the copolymer main chain. Temperature and solvent effects on the specific rotation of the chiral homopolymer and copolymers were investigated. The results suggest that the chiral polymers synthesized in this investigation did not show a strong preference for a particular helical conformation. Applications of the chiral polymers on the asymmetric addition of n-butyllithium to aldehydes were also discussed.     

Modification of a carbon/carbon composite with a thermosetting resin precursor as a matrix by the addition of carbon black

Carbon/carbon composites were made through the pyrolysis of stabilized PAN felt and phenolic resin with the addition of 5 or 10 wt % carbon black to the matrix and then heat treatment at 600–2500°C. The effects of adding carbon black to the matrix precursor on the physical properties, microstructure, and mechanical properties of the resultant composites were investigated. Adding carbon black not only reduced the weight loss but also limited the shrinkage of the resultant composites. Adding carbon black also accelerated the formation of carbon basal planes in the matrix. At 2500°C, the crystalline stacking height in the composite with 10 wt % added carbon black was 200% greater than that with no additive. The flexural strength of the composite also increased from 15 to 42 MPa (almost 300%). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 333–337, 2006     

Ⅳ.工业钒催化剂的内部表面利用率

<正>当传质与传热过程影响催化反应速度时,利用化学动力学方程式严格地计算反应的总速度是一个极其复杂的课题。实际上一般多采用某些简化的假定,作近似计算,以满足工业设计上的需要。利用毛细管模型与催化剂内部表面利用率的概念来计算二氧化硫在工业钒催化剂上的氧化速度,给工业设计提供了一个简单有用的计算方法。     

TREOR多晶X射线衍射图指标化程序的适用性

多晶Ｘ射线衍射图指标化的ＴＲＥＯＲ程序已被普遍采用，特别是在硅酸盐矿物等材料的晶体结构研究工作中应用很多。然而，实际上它存在着一定的缺陷，有可能得出错误的结果。本文对这一程序作了详细的检验，发现即使在理想条件下它都不适用于低对称晶系的指标化。在对程序作改进以后，该程序可适用于高对称晶系多晶衍射的指标化     

二氧化硫在钒催化剂上氧化动力学的研究——Ⅲ.几种工业钒催化剂的动力学方程式的比较

<正>作者等过去的工作已经证实,由于扩散过程的影响、温度范围的不同、或化学组成的差异,二氧化硫在钒催化剂上的氧化动力学方程式可能具有不同的形式。反应物及生成物与催化剂之间的相互作用,可能使催化剂具有不同的颜色与活性,因而即使温度相同,由于催化剂在层内所处的部位不同,其催化活性可能并不一致。这些复杂性给工业设计带来了很大的困难。因此,合理的简化是完全必要的。 作者等选取了几种不同的工业钒催化剂,用实验方法求得了适用于它们的动力学方程式,进行比较和讨论,提出了一个简便的、合理的、可以用作设计基础的动力学方程式。     

Effects of buffer layer materials and process conditions on growth mechanisms of forming networks of SWNTs by microwave plasma chemical vapor deposition

This study investigates the growth mechanism of IC compatible processes and to the feasibility of synthesizing networks of single-walled carbon nanotubes (SWNTs) at lower temperatures (610 °C) on Si wafer using microwave plasma chemical vapor deposition (MPCVD) with CH₄ and H₂ as source gases. The effects of the buffer layer materials (ZnS–SiO₂, Al₂O₃, AlON, and AlN ) and process conditions on growth of carbon nanostructures with Co as catalyst were also examined, where the buffer layers and Co catalyst were deposited in sequence by physical vapor deposition (PVD), followed by H-plasma pretreatment before deposition of carbon nanostructures. Additionally, the morphologies and bonding structures of carbon nanostructures were characterized by field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), and Raman Spectroscopy. Analytical results demonstrate that networks of SWNTs are more favorable to be synthesized by selecting proper buffer layer material (e.g., AlON), and under higher temperatures, thinner catalyst thickness (e.g., 5 nm) and lower CH₄ / H₂ ratio (e.g., 5 / 100 sccm/sccm). The networks of SWNTs can be fabricated at temperatures as low as 610 °C by manipulating these parameters. In conclusion, the growth mechanism determines the conditions for the formation of nano-sized extrusions on catalyst particles surface.     

Rapid Formation of Active Mesoporous TiO2 Photocatalysts via Micelle in a Microwave Hydrothermal Process

Rapid formation of active, mesoporous, and crystalline TiO₂ photocatalysts via a novel microwave hydrothermal process is presented. Crystalline anatase mesoporous nanopowders 100–300 nm in size with worm hole-like pore sizes of 3–5 nm were prepared by a modified sol–gel of titanium tetra-isopropoxide, accelerated by a microwave hydrothermal process. The organic surfactant, tetradecylamine, which is used as a self-assembly micelle in the sol–gel and microwave hydrothermal process, enables to harvest crystallized mesoporous anatase nanoparticles with a high-surface area. Mesoporous worm hole-like and crystalline powders with surface areas of 243–622 m²/g are obtained. X-ray diffraction, N₂-adsorption isotherms (Barrett–Joyner–Halenda and Brunauer–Emmet–Teller method), scanning electron microscope, and transmission electron microscope are used to identify the characteristics and morphologies of the powders. It is shown that crystallization by calcination at 400°C/3 h inevitably reduced the surface area, while the microwave hydrothermal process demonstrated a rapid formation of crystalline mesoporous TiO₂ nanopowders with a high-surface area and excellent photocatalytic effects.     

Preparation and application of fluorocarbon polymer/SiO2 hybrid materials,part 1: Preparation and properties of hybrid materials

For this study, we first prepared a fluorocarbon polymer and its hybrid materials. We found that fluorocarbon copolymers can produce hydrogen bonds with SiO₂ to form hybrid materials. We also used thermogravimetric analyzer and tested the thermostabilities of the four products, which were ranked as follows: fluorocarbon copolymer/SiO₂ hybrid material > fluorocarbon polymer/SiO₂ hybrid material > fluorocarbon copolymer > fluorocarbon polymer. In addition, we found that, due to the inorganic SiO₂ used, the number of pores and the specific surface areas of the hybrid materials both increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1140–1145, 2007