基于图像数据库的动态场景生成系统

实现各类目标和背景下动态场景的计算机编辑和生成，首先应对组成动态场景的要素进行分析，即目标，目标运动规律和特殊事件四个要素，然后通过编程由四个模块完成相应功能。目标，背景编辑模块可对目标，背景图像进行各种处理，并对重要特征量进行计算，运动路径模块可指定目标的运行规律，包括路线，大小和角度变化等。特殊事件模块可加入独立目标的各类典型事件，如运动的干扰物等。最后通过动态场景合成由计算机自动生成所需的动态场景图像。所需的原始目标，背景图像来源于图像数据库管理系统，通过索引项可便携地找到。     

Thermal—Mechanical Fatigue Behavior and Life Analysis of Cast Ni—base Superalloy K417

In-phase(IP) and out-of-phase(OP)thermal-mechanical fatigue(TMF) behavior of cast Ni-base superalloy K417 was studied.All experiments were carried out under total strain control with temperature cycling between 400-850℃.Both in-phase and out-of-phase TMF specimens exhibited cyclic hardening followed by cyclic softening at the minimum temperature.Besides,they cyclically hardened in the early stage of life followed by cyclic softening at the minimum temperature.Besides,they cyclically hardened in the early stage of life followed by cyclic softening at the maximum temperature.OP TMF life was longer than of IP TMF.Various damage mechanisms operating in different controlled strain ranges and phasing were discussed.A few life prediction methods for isothermal fatigue were used to handle TMF fatigue and their applicability to superalloy K417 was evaluated.The SEM analysis of the fracture surface showed that transgranular fracture was the principal cracking mode for both IP and OP TMF.Oxidation was the main damage mechanism in causing shorter fatigue life for IP TMF compared with OP TMF.     

CAD系统中产品设计三维实体建模方法的研究

三维建模是应用CAD系统进行产品设计的重要步骤。现在市场上已有不少的CAD系统，但是不同系统中的三维建模方法却是基本相同的。在这些三维建模的方法中，往往对用户施加了许多的限制，使得用户无法建立复杂的三维实体。笔者提出了一种新的三维建模方法－折叠法，应用这种方法的概念和原理，可以开发出先进的三维建模CAD系统。折叠二维平面图形构成三维实体是作者提出的一种新概念。     

Criterion of Magnetic Saturation and Simulation of Nonlinear Magnetization for a Linear Multi-core Pulse Transformer

The linear multi-core pulse transformer is an important primary driving source used in pulsed power apparatus for the production of dense plasma owing to its compact,relatively low-cost and easy-to-handle characteristics.The evaluation of the magnetic saturation of the transformer cores is essential to the transformer design,because the energy transfer efficiency of the transformer will degrade significantly after magnetic saturation.This work propses analytical formulas of the criterion of magnetic saturation for the cores when the transformer driver practical loads.Furthermore,an electric circuit model based on a dependent source treatment for simulating the electric behavior of the cores related to their nonlinear magnetization is developed using the initial magnetization curve of the cores.The numerical simulation with the model is used to evaluate the validity of the criterion.Both the criterion and the model are found to be in agreement with the experimental data.     

Hysys软件在分析精丙烯硫化物来源中的应用

气体分馏装置原料液化石油气 (LPG)中有机硫化物形态复杂 ,考察分析工业装置精丙烯硫化物含量变化难度大。利用Hysys模拟 ,分析判断LPG中小分子有机硫化物在气体分馏产品的分布并提出了控制措施。考虑操作条件对精丙烯硫含量的影响 ,并对工业装置精丙烯总硫超标原因进行了分析。     

HART协议物理层设备的测试(上)

本文介绍HART协议物理层设备的测试要求、测试设备、测试方法及测试时的一些特别说明。     

臭氧法水处理在空调冷却水系统中的应用

探讨了臭氧法杀菌灭藻，缓蚀，阻垢的机理，认为臭氧法可用于空调冷却水处理，并给出在工程设计中的应用方法。     

REHEATING TEMPERATURE CONTRAST AND MICROSTRUCTURES OF 7075 Al ALLOY CAST BY LIQUIDUS SEMI-CONTINUOUS CASTING

In this study, reheating of liquidus semi-continuous cast billets of 7075 Al alloy was carried out in a resistance furnace, and the temperature contrast of the outer and the center of the reheated billets was investigated, then the reheating microstructures were investigated. Results show that: the difference of temperature between the outer and center is small and the difference of their microstructures are also small. During reheating at 576℃ the spheroidization of grains is significant after 5min and no rosettes are visible after 20min by optical microscopy. Similar observations were madeon materials reheated at 596℃, but the ripening process is faster. The grains growup to 30-60μm, fine enough for thixoforming.     

偏振模色散统计特性的研究

利用动态方程研究了偏振模色散矢量的统计特性 ,分别用统计系综和频率系综两种方法进行数值模拟。数值结果表明 ,统计系综和频率系综两种方法的结果一致。在大归一化距离条件下 ,均方根时延的平方随归一化距离线性变化 ;偏振模色散矢量的各个分量服从高斯分布 ,差分群时延服从麦克斯韦分布 ;偏振模色散矢量弥散于整个邦加球     

石油系油浆与煤系闪蒸油的焦化性能——I．热解条件的影响

通过偏光显微镜观察了石油系油浆（LH）与煤系闪蒸油（SN）焦化后所得焦块的光学结构。结果表明，在较宽条件下两种原料单独焦化均得不到取向度高的流线型结构。将两种原料以一定比例混合后先热解丙焦化所得焦块的光学结构明显好于二者混合后直接焦化所得焦块的光学结构，其中LH和SN以3：2的重量比混合后在440℃、1MPa下热解3．5h然后再在530℃、1MPa下焦化8h所得焦块为具有较高取向度的流线型结构，适合于作为针状焦的起始原料。