Laser-induced fluorescence (LIF) studies of liquid-liquid flows. Part I: Flow structures and phase inversion

A non-intrusive dye tracing technique, laser-induced fluorescence (LIF), has been applied to investigate the co-current flow of two immiscible organic-aqueous liquid flows in a vertical pipe. This technique allowed detailed visualization of the dynamic evolution of the flows. Flow structures in liquid-liquid flows at high dispersed phase fraction were revealed which had not been seen before. In pipe flow, an unstable range was found in the flow pattern map in which oil-in-water (o/w) and water-in-oil (w/o) dispersions could co-exist. Secondary dispersions (o/w/o and w/o/w) were observed for most volume fractions and velocities, especially in the unstable range. It was observed that, when the flow is in the unstable region, both w/o/w and o/w/o secondary dispersions could appear in the same set of experiments. It was found that this unstable range in the pipe flow, in spite of the similar appearance, was different to the ambivalent range seen in agitated systems. The one-dimensional drift flux model of Wallis (1969) for dispersed flow and a laminar model for co-current downward annular flow, were also applied to predict the in situ oil holdup; good agreement was obtained.     

高性能环氧树脂涂料的研制

以甲基丙烯酸、丙烯酸丁酯及苯乙烯的聚合为接枝体，在过氧化苯甲酰作用下对E-51环氧树脂进行接枝改性，同时对三乙烯四胺进行曼尼希改性，制得多种改性固化剂，并用其与改性的环氧树脂配制成涂料，实验结果表明，当苯酚、甲醛和三乙烯四胺的物质的量比为3：3：1时固化剂的固化性能最好。     

聚甲基丙烯酰氧乙基二甲基丁烷基溴化铵共振光散射法测定核酸

通过光谱法研究聚甲基丙烯酰氧乙基二甲基丁烷基溴化铵(PMDB)和核酸的作用。结果表明通过共振光散射法用PMDB检测微量的DNA可靠、准确和简单。     

浅析AC发泡剂生产的碱耗和省碱技术

本文概况了尿素法AC发泡剂的生产过程中中间产品的流失途径及副反应的产生原因对AC收得率(以碱计算)的影响以及省碱技术进行了分析.     

An Attractive Synthetic Approach to Methyl Formate from Methanol via Methyl Nitrite

Catalytic synthesis of methyl formate has been investigated by a novel route starting from methyl nitrite in vapor phase. The acidic sites of the catalysts play a crucial role for the catalytic activity and the selectivity of formation of methyl formate. The H-Y zeolite catalyst gave higher yield and selectivity of the target product. This study provides a new approach for the synthesis of methyl formate from methanol via methyl nitrite.     

氧化物纤维/氧化物陶瓷基复合材料研究概述

氧化物纤维，氧化物陶瓷基复合材料可以在高温氧化环境下长时间工作，是最有发展潜力的高温结构陶瓷材料之一。决定氧化物纤维，氧化物陶瓷基复合材料性能最主要的2个因素是氧化物纤维的性能和界面材料的组成与结构。笔者介绍了氧化物纤维和界面材料的发展，以及界面材料涂覆方法，并探讨了氧化物纤维，氧化物陶瓷基复合材料的发展趋势。     

甲醇/正己烷的渗透汽化分离的研究 Ⅰ.渗透汽化膜的研制

本文研制了从甲醇／正己烷体系中分离甲醇的渗透汽化复合膜ＣＡ／ＰＡＮ（ＰＥＳ）、ＰＶＡ／ＰＡＮ（ＰＥＳ）。实验证明膜对该体系有较高的选择分离性和良好的渗透性，当进料甲醇浓度为３％时，渗透通量Ｊ≈０．６００ｋｇ／ｈ·ｍ２，分离因子α→∝。本文还考察了不同操作条件对膜分离性能的影响及膜的稳定性和均匀性。     

Morphologic study of electrochemically formed lead dioxide

Various electrochemical methods with different conditions were used to prepare lead dioxide (PbO₂). The observation revealed that the morphology of deposited PbO₂ could be controlled by simply changing deposition parameters. Under the condition of oxygen evolution, which dominates the electrode process, uniformly distributed high porous structured PbO₂ was formed. The results indicated that large current density or high potential polarization should be one of the most important and necessary factors for forming high surface area PbO₂ deposit. Only β-PbO₂ was identified by X-ray diffraction measurement for the deposit prepared by present methods and solution. One potential application of this method is to prepare nanoscaled PbO₂ parallel lines.     

QH-2型扁环填料的流体力学和传质性能研究

在内径60 0填料塔中 ,用空气 富氧水系统对3 8和5 0QH 2型扁环填料的流体力学和传质性能进行了研究 ,得出计算其压降、液泛气速和传质单元高度的关联式。并与3 8鲍尔环、5 0鲍尔环和3 8环矩鞍填料进行了比较 ,结果表明 ,QH 2型扁环具有优良的流体力学和传质特性。     

毛细管动态挤出下聚合物熔体非线性流变行为的研究

采用毛细管动态流变仪,选用PELD、PP、PS和PA等典型物料,研究了毛细管动态挤出下各聚合物熔体的非线性流变行为。结果表明,不同物料的流变行为对振动力场的响应特性有较大差异,只有在一定的振幅和频率下振动力场才能有效降低熔体的黏度。实验首次发现,PP、PS和PA存在窄的振动参数区域,在此区域内,熔体的动态表观黏度值大于相应的稳态值,出现“加振变黏”现象。这一新的发现表明,并非“只要引入振动就一定有利于聚合物材料的成型加工”,必须考虑不同分子结构的聚合物材料对振动的不同响应规律。