水库突发事件应急预案研究现状与关键技术初探

水库突发事件应急预案是大坝风险管理中非常重要的一个环节,是降低水库大坝风险的非工程措施.本文总结了国内水库突发事件应急预案的研究现状,并结合我国实际国情,初步提出了开展应急预案的关键技术,供大坝安全管理及科研人员参考.     

Ionothermal synthesis of a three-dimensional zinc phosphate with DFT topology using unstable deep-eutectic solvent as template-delivery agent

A three-dimensional zinc phosphate compound with DFT topology, designated as ZnPO₄-EU1, has been synthesized by an ionothermal approach from the system HF-ZnO–P₂O₅-choline chloride-imidazolidone. Ethylenediamine, derived from decomposition of the imidazolidone component of the deep-eutectic solvent (DES) itself, is delivered to the synthesis and serves as an appropriate template for ZnPO₄-EU1. Experiments in which the synthesis conditions were varied showed that ZnPO₄-EU1 may be prepared over a wide molar ratio of P/Zn = 0.55–13.0. Powder X-ray diffraction patterns have been obtained at intervals to track the crystallization process of this material. The experimental data show that Zn₃(PO₄)₂ · 4H₂O (a dense phase) was first isolated from the DES after reaction for 1 h. Subsequently, the pure phase of ZnPO₄-EU1 was obtained with increasing crystallization time from 12 h to 72 h. The experimental results show that the nucleation and crystallization take place with relatively low levels of solvent degradation, demonstrating that zinc phosphate with a three-dimensional framework can be synthesized by in situ generation of an appropriate template using an unstable DES at high temperatures (150–200 °C).     

Passively Q -switched Ytterbium-Doped Double-Clad Fiber Laser With a Cr4+:YAG Saturable Absorber

A high-power and high-repetition-rate passively Q -switched ytterbium-doped single-mode double-clad fiber laser was built using a Cr⁴⁺:YAG saturable absorber (SA). Two different SAs with initial transmissions of T_omicron = 30% and T_omicron = 50% were studied. At the maximum coupled pump power of 9.8 W, an output power of 4.7 W, pulse duration of 143 ns, pulse repetition rate of 253 KHz, pulse energy of 18.5 muJ, and slope efficiency of 49% were obtained with the T_omicron = 30% SA.     

"What is in a word? No versus Yes differentially engage the lateral orbitofrontal cortex": Correction.

Reports an error in "What is in a word? No versus Yes differentially engage the lateral orbitofrontal cortex" by Nelly Alia-Klein, Rita Z. Goldstein, Dardo Tomasi, Lei Zhang, Stephanie Fagin-Jones, Frank Telang, Gene-Jack Wang, Joanna S. Fowler and Nora D. Volkow (Emotion, 2007[Aug], Vol 7[3], 649-659). The supplemental materials link should appear as follows: http://dx.doi.org/10.1037/1528-3542.7.3.649.supp. (The following abstract of the original article appeared in record 2007-11660-018.) The words "No" and "Yes" are involved in conditioning to prohibit or encourage behavior, respectively. The authors, therefore, hypothesized that these words would be attributed to endogenous valence, activating neuronal circuits involved with valence and emotional control. Functional MRI (fMRI) at 4 Tesla was used to record regional brain activity while participants were exposed to emphatic vocalizations of the words. Results showed that No and Yes were associated with opposite brain-behavior responses; while No was negatively valenced, produced slower response times, and evoked a negative signal in the right lateral orbitofrontal cortex (OFC), Yes was positively valenced, produced faster response times, and evoked a positive signal in a contiguous region of the OFC. Attribution of negative valence to No and trait anger control were associated with increased responsivity of the OFC to No. Inasmuch as sensitivity to the prohibitive command No develops during childhood through interaction with primary caregivers as the first social objects, our findings may implicate the lateral OFC in the neurobiology of emotion regulation and subsequent social development. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

新型刮刀钻头的设计及现场试验研究

在理论分析的基础上，综合PDC钻头和刮刀钻头的优点，设计了一种新型的刮刀钻头，并进行了现场试验。现场试验结果表明，该钻头运转平稳，采用低钻压、高转速，钻进速度快，井眼规则通畅，有较明显的防斜作用，该种钻头的推广应用对提高钻井工程的整体效益具有十分重要的意义。     

铣制三元流叶轮时产生误差的原因分析及解决方法

对在五坐标数控加工中心上铣制三元流叶轮时出现的叶轮附面尺寸误差问题，进行了详细分析，并提出了问题的解决方法，有效地避免了加工中产生的超差。     

光纤荧光传感器衰减寿命的加权对数拟合法

荧光寿命的检测是荧光光学传感器的核心内容，国际上尝试了多种方法来拟合这种理论上为单指数衰减信号的荧光衰减曲线。这些方法包括非线性函数标准拟合方法。即Levenburg-Marquardt方法，以及Prony方法、FFT方法，对数拟合法等等。为了克服在实际应用中发生的信号退化，需要在测量信号衰减寿命的同时测量信号的初始强度。文章介绍了一种加权的对数拟合法，经计算机仿真及实际数据测试均可以得到和Levenburg-Marquardt方法非常接近的结果，且拟合时间大大缩短，测量稳定性大大提高。仿真测试及具体实验测试结果显示了这种方法的有效性。该方法不仅与Levenburg-Marquardt方法的偏差曲线非常相似，而且实验测得的荧光寿命与Levenburg-Marquardt方法偏差在0．2％以内。     

基于Delphi的报童模型的实现与动态仿真

已往库存论中的决策模型,它是把现实过程用数学的方法进行分析,得到决策值,但不能看到决策的过程,不能反映出现实生活中的不确定性、动态性。运用Delphi 7.0和SQL server 2000对销售过程进行了动态仿真,利用Newsboy模型的推广(S,s)订购策略来监控库存并做出决策,这样就体现出此过程的不确定性、动态性;且举出了一个仿真商品销售的实例,对其中的一些关键技术,如何仿真、算法的实现等进行了阐述。     

TiAl基合金表面改性对高温抗氧化性的影响

研究了渗碳处理ＴｉＡｌ基合金试样的高温氧化行为，发现渗碳处理可以在ＴｉＡｌ基合金试样表层形成致密的多层结构的渗碳层，并发生表层Ａｌ、Ｔｉ重新分配。致密的渗碳层具有良好的高温抗氧化性和高温热稳定性，同时，Ｔｉ、Ａｌ重新分配形成的富Ａｌ最外层也能进一步提高合金的抗氧化性。     

关于彩色火焰蜡烛的研制

本文阐述了利用焰色反应的原理研制彩色火焰蜡烛，着重分析并解决了在研制工作中出现的几个技术关键，如主燃剂的选取、蜡烛成型和强度、发色剂的选择与用量等．