Hydrothermal Synthesis of Magnesium Aluminate Platelets

Magnesium aluminate (MgAl₂O₄) platelets were first synthesized by hydrothermal treatment of γ-AlO(OH) in a magnesium nitrate aqueous solution at 400°C. The platelets are 100–200 nm in width and 25 nm in thickness. The influence of temperature, the anions of the magnesium salt, the amount of magnesium salt, and precursor pH on the formation of such structure was investigated. The experimental results indicated that the anions of the magnesium salt and precursor pH could have a significant influence on the growth of MgAl₂O₄. MgAl₂O₄ formation followed the in situ transformation mechanism, which was the reason why the MgAl₂O₄ crystallites had a platelet morphology.     

Effects of tube rupture modeling and the parameters on the analysis of multiple steam generator tube rupture event progression in APR1400

A multiple steam generator tube rupture (MSGTR) event in APR1400 has been investigated using the best estimate thermal hydraulic system code, MARS1.4. The effects of the parameters such as the number of ruptured tubes, rupture location, affected steam generator on the analysis of the MSGTR event in APR1400 are examined. In particular, tube rupture modeling methods, single tube modeling (STM) and double tube modeling (DTM), are compared. The APR1400 is found to have the capability of allowing more than 30 min to operators for the MSGTR event of five tubes. The effects of rupture location on the MSSV lift time is not significant in the case of STM, but the MSSV lift time for tube-top rupture is found to be 25.3% larger than that for rupture at the hot-leg side tube sheet in the case of DTM. The MSSV lift time for the cases that both steam generators are affected (4C5x, 4C23x) are found to be larger than that of the single steam generator cases (4A5x, 4B5x) due to a bifurcation of the primary leak flow. The discharge coefficient of Cd is found to affect the MSSV lift time only for a smaller value of 0.5. It is found that the most dominant parameter governing the MSSV lift time is the leak flow rate. Whether any modeling method is used, it gives the similar MSSV lift time if the leak flow rate is close, except in the case where both steam generators are affected. Therefore, the system performance and the MSSV lift time of the APR1400 are strongly dependent on the break flow model used in the best estimate system code.     

旋转式伽玛刀的辐射剂量学

旋转式伽玛刀的辐射剂量学指标的物理测试在放射性医疗设备投放医院正式临床使用前是必不可少的，是对设备及其附件的设计、加工制造、安装以及电气控制系统等的全面综合性检定。用电离室作辐射剂量学的绝对测量，用胶片法进行相对测量，给出了测量结果并进行了讨论。     

浸胶工艺对Nomex蜂窝性能的影响

本文研究了浸胶工艺对Ｎｏｍｅｘ蜂窝性能的影响，分析探讨了提高Ｎｏｍｅｘ蜂窝性能及外观质量的途径。研究结果表明：采取新的浸胶工艺制作的Ｎｏｍｅｘ蜂窝，各项性能全面达到法国宇航材料标准。     

强化会计内部控制促进高校科学管理

建立和强化完善的会计内部控制体系,对于高校优化资源,促进科学管理有着重要意义.针对当前高校会计内部控制的不足,提出了若干解决对策.     

提高E^2PROM中NMOS管源漏穿通电压的实验研究

为了提高Ｅ＾２ＰＲＯＭ中Ｎ管源漏穿通电压，用实验的方法对制造工艺进行了研究。结果表明，高能量注入是提高ＶＰＴ的有效手段，但受到ｐｎ结击穿的限制，只适用于低区短沟Ｎ管；ＤＤＤ工艺大幅度高ＶＰＴ，但ｐｎ结击穿电压低于２０Ｖ，不能应用于高压ＭＯＳ管；采用适量的防穿通注入和适当增大沟道长度为最理想的工艺途径。     

A novel methanol-tolerant Ir-Se chalcogenide electrocatalyst for oyxgen reduction

A novel methanol-tolerant oxygen-reduction catalyst, Iridium-selenium (Ir-Se) chalcogenide, was synthesized by chemical precipitation in an organic solvent. Auger electron spectroscopy (AES) analysis confirmed that the synthesized Ir-Se chalcogenide had a chemical formula of Ir₄Se. This chalcogenide showed strong catalytic activity towards the oxygen reduction reaction (ORR) and a high methanol tolerance. It was found that most of the oxygen could be directly reduced to water through a four-electron pathway with less than 10% hydrogen peroxide (H₂O₂) being produced during the ORR. The improvement in catalytic activity of the Ir-Se chalcogenide in comparison with that of pure Ir might be attributed to the effect of a bimetallic interaction.     

新型高性能脉冲峰值保持电路

本文介绍了两种新型跨导型脉冲峰值保持器，分别用于多丝正比室（ＭＷＰＣ）和复合晶体闪烁探测器（Ｐｈｏｓｗｉｃｈ）输出脉冲信号的形状和幅度分析。电路的跨导放大级采用跨导型集成运算放大器，使电路结构简单化，且性能优良可靠，能响应输入脉冲最小上升时间分别为５０ｎｓ（Ｐｈｏｓｗｉｃｈ）和５００ｎｓ（ＭＷＰＣ）的信号，在４０ｄＢ的动态范围内，两电路的积分非线性均好于０．１％，特别适用于空间γ射线观测。     

Performance analysis of the forgetting factor RLS algorithm

An analysis is given of the performance of the standard forgetting factor recursive least squares (RLS) algorithm when used for tracking time-varying linear regression models. Three basic results are obtained: (1) the ‘P-matrix’ in the algorithm remains bounded if and only if the (time-varying) covariance matrix of the regressors is uniformly non-singular; (2) if so, the parameter tracking error covariance matrix is of the order O(μ + γ²/μ), where μ = 1 - λ, λ is the forgetting factor and γ is a quantity reflecting the speed of the parameter variations; (3) this covariance matrix can be arbitrarily well approximated (for small enough μ) by an expression that is easy to compute.