Effect of deformation route on microstructural development in aluminum processed by equal channel angular extrusion

Aluminum has been deformed by equal channel angular extrusion (ECAE) to obtain submicron-grained structures under different deformation routes. The deformation routes were varied by rotating billets through 0, 90, and 180 deg between each extrusion pass, and were designated as route A, B_C, and C, respectively. Based on quantitative microstructural analysis, the effectiveness of the deformation route is shown to depend upon the different definition used. The order of effectiveness is (a) A > B_C > C for both 90 and 120 deg dies, in terms of the generation of high-angle grain boundaries (HAGBs); (b) B_C > C > A for both 90 and 120 deg dies, in terms of the formation of equiaxed shape of grains; and (c) B_C > A > C for 90 deg die and B_C ∼ A > C for 120 die, in terms of reducing grain size. It is suggested that the generation of HAGBs can be related to the accumulation of nonredundant strain, while the shape and orientation of grains may be linked to the shearing patterns of the deformation route.     

Static and pulsed pressures measured using electrically conducting rubbers

A method of measuring static and pulsed pressures using electrically conducting rubber sensors is proposed. The method is based on a change in the volume resistivity of a filled rubber under the action of external pressure. The pressure-induced change in resistance of the rubber sensor is proportional to the applied pressure and can be measured by a bridge circuit. Using this method, it is possible to evaluate the degree of homogeneity of the pressure distribution over a solid surface. This is achieved by distributing rubber sensors over the given surface.     

Copper-zirconium tungstate composites exhibiting low and negative thermal expansion influenced by reinforcement phase transformations

A fully-dense Cu-75 vol pct ZrW₂O₈ metal matrix composite was fabricated by hot isostatic pressing of Cu-coated ZrW₂O₈ particles. A small amount of the high-pressure γ-ZrW₂O₈ phase was created during the cooldown and depressurization following densification; near complete transformation to γ-ZrW₂O₈ was achieved by subsequent cold isostatic pressing. The thermal expansion behavior of the composite between 25°C and 325°C was altered by the cold isostatic pressing treatment, and also depended on the length of time that had passed between thermal cycles. The measured thermal expansion coefficients within specific temperature ranges varied from −6·10⁻⁶ K⁻¹ to far above the thermal expansion coefficient of the copper matrix. The complex temperature-dependent expansion/contraction behavior could be justified by considering the evolution of phase transformations taking place in the ZrW₂O₈ phase, which were observed by in-situ synchrotron X-ray diffraction measurements.     

Study of phase equilibria in the Al - Pd - Re system

Scanning and transmission electron microscopy have been combined with x-ray diffraction to examine the phase equilibria in the Al - Pd - Re system at 1000°C for compositions from 50 to 100 at.% Al, and the corresponding isothermal section has been constructed. The binary monoclinic Al₃ Re phase has been observed for the first time. It is confirmed that there is a stable icosahedral phase in this system. The boundaries to its homogeneity region have been determined and the phase equilibria in which it participates.     

Another Perspective on Vocabulary Richness

This article examines the usefulness ofvocabulary richness for authorship attributionand tests the assumption that appropriatemeasures of vocabulary richness can capture anauthor's distinctive style or identity. Afterbriefly discussing perceived and actualvocabulary richness, I show that doubling andcombining texts affects some measures incomputationally predictable but conceptuallysurprising ways. I discuss some theoretical andempirical problems with some measures anddevelop simple methods to test how wellvocabulary richness distinguishes texts bydifferent authors. These methods show thatvocabulary richness is ineffective for largegroups of texts because of the extremevariability within and among them. I concludethat vocabulary richness is of marginal valuein stylistic and authorship studies because thebasic assumption that it constitutes awordprint for authors is false.     

Analysis of the possibility of implementing the principle of redistribution of concentration fields for reactive distillation processes

The evolution of the phase portrait for the dynamic system of open evaporation combined with a chemical reaction for a fixed liquid amount was studied as dependent on the rate constants of the reaction. A three-component azeotropic mixture whose vapor-liquid equilibrium diagram is characterized by two distillation regions was considered. The possibility of the open evaporation trajectory to transfer through the separatrix between the distillation regions was shown, as well as the possibility of implementing the principle of redistribution of the concentration fields due to chemical reactions occurring in reactive distillation columns.Translated from Teoreticheskie Osnovy Khimicheskoi Tekhnologii, Vol. 39, No. 2, 2005, pp. 115–119.Original Russian Text Copyright © 2005 by Solokhin, Nazanskii, Timofeev.     

Managing change with CAD and CAD/CAM

A model is developed for the analysis of factors influencing organizational and technological changes associated with CAD and CAD/CAM (computer-aided design/computer-aided manufacture). Different pressures for adoption and the sociopolitical environment of the organization and related to managerial strategies and their impact on skills, tasks, training, and changes in work organization. Opportunities are illustrated through the experiences of seven British engineering companies implementing the technologies. Six of the companies are in manufacturing and one is an engineering services organization. Four of the companies are of small to medium size (under 500 employees) and the other three are large, multisite organizations. Key elements of the technological change are identified, and the position of the seven companies in relation to these elements is summarized and discussed     

Convective transfer processes in chemically stable and reacting liquids with an internal structure

Dynamic processes are studied in media with softly and hardly internal destroyable configurations. A method is examined for the measurement of properties of media with spatial separation of the chemical transformation stages and thermal hydrodynamic measurements.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 53, No. 5, pp. 781–789, November, 1987.     

Fabrication of Strain-Relaxed Si<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript>x</Subscript>/Si(001) Buffer Layers of Low Surface Roughness

The results are presented of the fabrication of strain-relaxed graded Si_{1 − x} Ge_x/Si(001) buffer layers with a maximum Ge fraction of about 0.25 that have a low density of threading dislocations (<10⁶ cm⁻²) and low surface roughness. The buffer layers are grown by atmospheric-pressure hydride CVD. It is found that chemical mechanical polishing can reduce their surface roughness to a level comparable with that of the original Si(001) substrates. It is shown that the polished buffer layers can serve as substrates for MBE-grown SiGe/Si heterostructures.__________Translated from Mikroelektronika, Vol. 34, No. 4, 2005, pp. 243–250.Original Russian Text Copyright © 2005 by Vostokov, Drozdov, Krasil’nik, Kuznetsov, Novikov, Perevoshchikov, Shaleev.