Platelet‐to‐lymphocyte ratio better predicts inflammation than neutrophil‐to‐lymphocyte ratio in end‐stage renal disease patients

Neutrophil‐to‐lymphocyte ratio (NLR) was introduced as a potential marker to determine inflammation in end‐stage renal disease (ESRD) patients. Recently, platelet‐to‐lymphocyte ratio (PLR) and NLR were found to positively correlated with inflammatory markers including tumor necrosis factor‐α (TNF‐α) and interleukin (IL)‐6 in cardiac and noncardiac patients. Data regarding PLR and its association with inflammation are lacking in hemodialysis (HD) and peritoneal dialysis (PD) patients. Hence, we aimed to determine the relationship between PLR, NLR, and inflammation in ESRD patients. This was a cross‐sectional study involving 62 ESRD patients (29 females, 33 males; mean age, 49.6 ± 14.6 years) receiving PD or HD for ≥6 months in the Dialysis Unit of Necmettin Erbakan University. PLR, NLR, C‐reactive protein, TNF‐α, IL‐6 levels were measured. PLR, NLR, serum high sensitive C‐reactive protein, IL‐6, and TNF‐α levels were significantly higher in PD patients when compared with HD patients. ESRD patients with PLR ≥ 140 had significantly higher NLR, IL‐6, and TNF‐α levels when compared to patients with PLR < 139. In the bivariate correlation analysis, PLR was positively correlated with NLR, IL‐6, and TNF‐α in this population. When we compared the association of PLR and NLR with IL‐6 (r = 0.371, P = 0.003 vs. r = 0.263, P = 0.04, respectively) and TNF‐α (r = 0.334, P = 0.008 vs. r = 0.273, P = 0.032, respectively), PLR was found to be superior to NLR in terms of inflammation in ESRD patients. Simple calculation of PLR can predict inflammation better than NLR in ESRD patients.     

Evaluation of the validity of the scalar approximation in optical wave propagation using a systems approach and an accurate digital electromagnetic model

The cause and amount of error arising from the use of the scalar approximation in monochromatic optical wave propagation are discussed using a signals and systems formulation. Based on Gauss’s Law, the longitudinal component of an electric field is computed from the transverse components by passing the latter through a two input single output linear shift-invariant system. The system is analytically characterized both in the space and frequency domains. For propagating waves, the large response for the frequencies near the limiting wave number indicates the small angle requirement for the validity of the scalar approximation. Also, a discrete simulator is developed to compute the longitudinal component from the transverse components for monochromatic propagating electric fields. The simulator output helps to evaluate the validity of the scalar approximation when the system output cannot be analytically calculated.     

Inhibitory effect of heavy metals on methane-producing anaerobic granular sludge

Heavy metals could potentially have a negative impact on methane-producing anaerobic granular sludge. The objective of this study was to investigate the inhibitory effect of zinc(II), chromium(VI), nickel(II), and cadmium(II) on the methane-producing activity of granular sludge sampled from the upflow anaerobic sludge blanket reactor that treats the wastewaters of a yeast factory, for a range of concentrations between 0 and 128 mg L(-1). The modified Gompertz, Logistic, and Richards equations were applied to describe the inactivation of anaerobic culture by heavy metals. According to these models, the values of methane production potential (mL) for a heavy metal concentration of 128 mg L(-1) were in the following order: Ni (44.82+/-0.67)>Cd (28.73+/-0.11)>Cr (15.52+/-1.63)>Zn (0.65+/-0.00). The IC(50) values, the metal concentrations that cause a 50% reduction in the cumulative methane production over a fixed period of exposure time (24h), for the individual heavy metals were found to be in the following order: Zn (most toxic; 7.5 mg L(-1))>Cr (27 mg L(-1))>Ni (35 mg L(-1)) approximately Cd (least toxic; 36 mg L(-1)).     

Microstructure,Mechanical, and Scratch Resistance Properties of TiAlCrNbN-Graded Composite Coating Deposited on AISI H13 Steel Substrate with Pulsed DC Closed Field Unbalanced Magnetron Sputtering Method

Structure and adhesion properties of TiAlCrNbN coatings were investigated. These coatings were deposited onto AISI H13 steel substrate using pulsed dc closed field unbalanced magnetron sputtering at different deposition parameters including duty cycle, bias voltage, and working pressure. The coatings have been characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The TiAlCrNbN-graded composite coatings have a dense and columnar structure. The X-ray diffraction patterns of coatings exhibited predominantly c-TiAlCrN, h-NbN, and h-TiAlN reflections. Scratch resistance test showed that the highest adhesion strength was attained as 68 N at 2.5 μs duty time, 100 V bias voltages, and 3 × 10^?3 Torr deposition parameters. The lowest adhesion strength was obtained as 55 N at 0.5 μs duty time, 50V bias voltage, and 2 × 10^?3 Torr deposition parameters.     

Capacitive micromachined ultrasonic transducers with diffraction-based integrated optical displacement detection

Capacitive detection limits the performance of capacitive micromachined ultrasonic transducers (CMUTs) by providing poor sensitivity below megahertz frequencies and limiting acoustic power output by imposing constraints on the membrane-substrate gap height. In this paper, an integrated optical interferometric detection method for CMUTs, which provides high displacement sensitivity independent of operation frequency and device capacitance, is reported. The method also enables optoelectronics integration in a small volume and provides optoelectronic isolation between transmit and receive electronics. Implementation of the method involves fabricating CMUTs on transparent substrates and shaping the electrode under each individual CMUT membrane in the form of an optical diffraction grating. Each CMUT membrane thus forms a phase-sensitive optical diffraction grating structure that is used to measure membrane displacements down to 2/spl times/10/sup -4/ /spl Aring///spl radic/Hz level in the dc to 2-MHz range. Test devices are fabricated on quartz substrates, and ultrasonic array imaging in air is performed using a single 4-mm square CMUT consisting of 19/spl times/19 array of membranes operating at 750 kHz.     

Thermal-mechanical-noise-based CMUT characterization and sensing

When capacitive micromachined ultrasonic transducers (CMUTs) are monolithically integrated with custom-designed low-noise electronics, the output noise of the system can be dominated by the CMUT thermal-mechanical noise both in air and in immersion even for devices with low capacitance. Because the thermal-mechanical noise can be related to the electrical admittance of the CMUTs, this provides an effective means of device characterization. This approach yields a novel method to test the functionality and uniformity of CMUT arrays and the integrated electronics when a direct connection to CMUT array element terminals is not available. Because these measurements can be performed in air at the wafer level, the approach is suitable for batch manufacturing and testing. We demonstrate this method on the elements of an 800-μm-diameter CMUT-on-CMOS array designed for intravascular imaging in the 10 to 20 MHz range. Noise measurements in air show the expected resonance behavior and spring softening effects. Noise measurements in immersion for the same array provide useful information on both the acoustic cross talk and radiation properties of the CMUT array elements. The good agreement between a CMUT model based on finite difference and boundary element methods and the noise measurements validates the model and indicates that the output noise is indeed dominated by thermal-mechanical noise. The measurement method can be exploited to implement CMUT-based passive sensors to measure immersion medium properties, or other parameters affecting the electro-mechanics of the CMUT structure.     

Parent psychopathology, parenting, and child internalizing problems in substance-abusing families.

A structural model accounting for child internalizing problems in substance-abusing families was tested. Parents receiving substance abuse treatment (N = 242) completed forms about children between the ages of 6 and 18 who resided in their home. The effects of parent gender, child gender, and child age were controlled. Negative parenting was examined as a mediator between parent internalizing and externalizing problems and child anxiety and affective problems using path analysis. Negative parenting mediated relations only between parent internalizing problems and child affective problems. High-positive involvement moderated relations between parent externalizing problems and child internalizing problems. Relations between parent externalizing problems and child anxiety and affective problems were significant only among families in which high-positive involvement was present. (PsycINFO Database Record (c) 2010 APA, all rights reserved)