STM32和OV2640的嵌入式图像采集系统设计

基于STM32嵌入式系统及200万摄像头OV2640设计了图像采集系统,分析了系统的基本硬件架构,分别对不同模块的功能特点作出了简单的介绍;对系统的软件设计给出了详细的说明,介绍了系统初始化的基本思路和流程,以及相关外围设备模块在程序中的使用;并给出了系统的整体设计思路,实现了系统的稳定运行。     

一种基于分簇的3D-RSSI的定位算法

节点定位是无线传感器网络的重要支撑技术之一,本文提出了一种适用于大规模无线传感器网络的分布式分簇定位算法。相比于集中式算法而言,本文提出的分簇式算法更适用于大规模无线传感器网络,不仅算法的复杂度低,而且通信量小,鲁棒性较好。在三维空间中随机分布节点,仿真结果表明,本文所提出的算法能取得较好的定位效果。     

大数据环境下数字档案馆信息安全保障研究

随着大数据时代的全面来临,大数据分析技术下的信息安全问题逐渐引起社会各界的普遍关注,受多种因素影响,大数据环境下数字档案馆信息安全呈现出新特点,对信息安全保障建设提出更高要求。     

Visual experience for autostereoscopic 3D projection display

In order to investigate visual experience for watching the autostereoscopic three‐dimensional (3D) projection display, we conduct a subjective evaluation experiment by a questionnaire when viewing video clips. Factor analysis is adopted to classify the evaluation items for the perpetual constructs of visual experience. Then a mixed design with repeated measurement analysis of variance with dimension and display duration as factors is carried out on the evaluation data to check the factorial effects and interactions for statistical significance. The results of factor analysis extract five factors including visual comfort, image quality, distortion, naturalness, and presence, which can be used as comprehensive indicators to evaluate the autostereoscopic 3D projection display. The results of analysis of variance indicate that image quality, which is used to assess two‐dimensional contents, is no longer applicable. It is necessary to give consideration to depth when evaluating 3D visual experience. Although 3D scenes enhance the overall subjective performance such as naturalness and presence, the health issues and stereoscopic distortion related to the introduction of depth cannot be ignored.     

A glue method for fabricating membrane electrode assemblies for direct methanol fuel cells

We present a simple glue method for fabricating membrane electrode assemblies (MEA) for direct methanol fuel cells (DMFC). Rather than the conventional “dry” hot-pressing method that relies solely on hot-pressing at a high pressure and temperature to form a MEA, the “wet” method developed in this work introduces a binding agent, consisting of Nafion^® solution, between a polymer electrolyte membrane (PEM) and an anode/cathode. The introduced binding agent can provide a better adhesion and stronger binding force between a membrane and an electrode, thereby facilitating a better interfacial contact between the electrode and the Nafion^® membrane, which has been proved by scanning electron microscopy (SEM) analyses to the cross-sectional morphology of the MEA after long-term operation. The cell performance characterization showed the MEA fabricated by the glue method was more stable in cell performance than that fabricated by the conventional hot-pressing method. Cyclic voltammetry (CV) results also demonstrated the MEA fabricated by the glue method exhibited a higher electrochemical surface area (ESA) as a result of the improved interfacial contact between the Nafion^® membrane and the electrodes. Finally, the DMFC with the MEA fabricated by the glue method was characterized by the electrochemical impedance spectroscopy (EIS).     

辣椒疫病菌对氟吗啉的抗药性研究

为了评估氟吗啉的未来抗性风险，以辣椒疫病菌为靶标，通过室内抗性菌株的驯化、筛选，以及紫外线诱变等方法，初步探索了辣椒疫病菌对氟吗啉的抗性情况。结果表明：抗性菌株对氟吗啉的抗性倍数较低，在3.45～11．33，生长速率明显低于野生敏感菌株。由此可见辣椒疫病菌对氟吗啉的抗性风险可能较低。     

注塑参数对聚碳酸酯成型收缩率的影响研究

研究了注塑参数对聚碳酸酯(PC)成型收缩率的影响，从理论上探讨了注塑参数—制品结构—收缩率之间的关系。试验结果表明，对PC成型收缩率影响最大的注塑参数是料温，其次是模具温度、注塑压力和注射速率，而保压时间、冷却时间、预塑速率在实验范围内对PC成型收缩率影响较小。     

聚乙撑二氧噻吩(PEDOT)的单体乙撑二氧噻吩(EDOT)的合成

以硫代二甘酸为原料,通过酯化、缩合、O-烷基化、水解和脱羧五步,合成了聚乙撑二氧噻吩(PEDOT)的单体乙撑二氧噻吩(EDOT),并对实验结果和过程进行了讨论,找出了影响反应的最关键因素.运用红外光谱仪(FTIR)及气相色谱-质谱联用仪(GC-MS)对产物进行了结构表征.     

Microcellular foaming of PE/PP blends

Three different polyethylene/polypropylene (PE/PP) blends were microcellular foamed and their crystallinities and melt strengths were investigated. The relationship between crystallinity, melt strength, and cellular structure was studied. Experimental results showed that the three blends had similar variation patterns in respect of crystallinity, melt strength, and cellular structure, and these variation patterns were correlative for each blend. For all blends, the melt strength and PP melting point initially heightened and then lowered, the PP crystallinity first decreased, and then increased as the PE content increased. At PE content of 30%, the melt strength and PP melting point were highest and the PP crystallinity was least. The blend with lower PP crystallinity and higher melt strength had better cellular structure and broader microcellular foaming temperature range. So, three blends had best cellular structure at PE content of 30%. Furthermore, when compared with PE/homopolymer (hPP) blend, the PE/copolymer PP (cPP) blend had higher melt strength, better cellular structure, and wider microcellular foaming temperature range, so it was more suited to be microcellular foamed. Whereas LDPE/cPP blend had the broadest microcellular foaming temperature range because of its highest melt strength within three blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4149–4159, 2007     

Synthesis and surface characterization of poly(methyl methacrylate)‐block‐polydimethylsiloxane copolymers from macroazoinitiator

Poly(methyl methyacrylate)‐block‐polydimethylsiloxane (PMMA‐b‐PDMS) copolymers with various compositions were synthesized with PDMS‐containing macroazoinitiator (MAI), which was first prepared by a facile one‐step method in our lab. Results from the characterizations of X‐ray photoelectron spectroscopy (XPS), contact angle measurements, and atomic force microscopy (AFM) showed that the copolymer films took on a gradient of composition and more PDMS segments enriched at the film surfaces, which then resulted in the low surface free energy and little microphase separation at the film surfaces. By contrast, transmission electron microscopy (TEM) analysis demonstrated that distinct microphase separation occurred in bulk. Slight crosslinking of the block copolymers led to much steady morphology and more distinct microphase separation, in particularly for copolymers with low content of PDMS. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007