A novel InGaP/GaAs S-shaped negative-differential-resistance (NDR)switch for multiple-valued logic applications

In this paper, a novel InGaP/GaAs multiple S-shaped negative-differential-resistance (NDR) switch based on a heterostructure-emitter bipolar transistor (HEBT) structure is fabricated and demonstrated. An interesting multiple NDR phenomenon resulting from an avalanche multiplication and successive two-stage barrier lowering process is observed under the inverted operation mode. The three-terminal-controlled and temperature-dependent NDR characteristics are also investigated. In addition, a typical transistor performance is found under the normal operation mode. Consequently, owing to the presented different stable operation points and transistor action, the studied device shows a good potential for multiple-valued logic and analog amplification circuit applications     

Adding sense of spatial locality to routing protocols for mobile ad hoc networks

Recently, there has been an increasing interest in mobile ad hoc networks. In a mobile ad hoc network, each mobile node can freely move around and the network is dynamically constructed by collections of mobile nodes without using any existing network infrastructure. Compared to static networks, it faces many problems such as the inefficiency of routing algorithms. Also, the number of control packets in any routing algorithm increases as the mobile speed or the number of mobile nodes increases. Most of the current routing protocols in ad hoc networks broadcast the control packets to the entire network. Therefore, by reducing the number of control packets, the efficiency of the network routing will be improved. If we know where the destination is, we can beam our search toward that direction. However, without using global positioning systems, how can we do this? Define the range nodes as the 1‐hop or 2‐hop neighbors of the destination node. In this paper, we propose using the range nodes to direct our searches for the destination. It can be combined with the existing routing protocols to reduce the control overhead. We show through simulations that AODV and DSR combined with the range node method outperforms the original AODV and DSR routing protocols in terms of control packets overhead. We also show that the delay introduced in find range nodes is insignificant. Copyright © 2006 John Wiley & Sons, Ltd.     

Functionalization of Graphene Oxide Films with Au and MoOx Nanoparticles as Efficient p‐Contact Electrodes for Inverted Planar Perovskite Solar Cells

A graphene oxide (GO) film is functionalized with metal (Au) and metal‐oxide (MoO_x) nanoparticles (NPs) as a hole‐extraction layer for high‐performance inverted planar‐heterojunction perovskite solar cells (PSCs). These NPs can increase the work function of GO, which is confirmed with X‐ray photoelectron spectra, Kelvin probe force microscopy, and ultraviolet photoelectron spectra measurements. The down‐shifts of work functions lead to a decreased level of potential energy and hence increased V_oc of the PSC devices. Although the GO‐AuNP film shows rapid hole extraction and increased V_oc, a J_sc improvement is not observed because of localization of the extracted holes inside the AuNP that leads to rapid charge recombination, which is confirmed with transient photoelectric measurements. The power conversion efficiency (PCE) of the GO‐AuNP device attains 14.6%, which is comparable with that of the GO‐based device (14.4%). In contrast, the rapid hole extraction from perovskite to the GO‐MoO_x layer does not cause trapping of holes and delocalization of holes in the GO film accelerates rapid charge transfer to the indium tin oxide substrate; charge recombination in the perovskite/GO‐MoO_x interface is hence significantly retarded. The GO‐MoO_x device consequently shows significantly enhanced V_oc and J_sc, for which its device performance attains PCE of 16.7% with great reproducibility and enduring stability.     

A novel authenticated group key agreement protocol for mobile environment

An authenticated group key agreement protocol allows a group of parties to authenticate each other and then determine a group key via an insecure network environment. In 2009, Lee et al. first adopted bilinear pairings to propose a new nonauthenticated group key agreement protocol and then extend it to an authenticated group key agreement protocol. This paper points out that the authenticated protocol of Lee et al. is vulnerable to an impersonation attack such that any adversary can masquerade as a legal node to determine a group key with the other legal nodes and the powerful node. This paper shall employ the short signature scheme of Zhang et al. to propose a new authenticated group key agreement protocol. The short signature scheme of Zhang et al. is proven to be secure against the adaptive chosen-message attacks in the random oracle model, so the proposed protocol can withstand the possible attacks. Besides, compared with the authenticated protocol of Lee et al., the proposed protocol is more secure and efficient.     

BER performance of a uniform circular array versus a uniform linear array in a mobile radio environment

In this letter, we present a comparison between the bit error rate (BER) performance of a uniform circular array (UCA) and a uniform linear array (ULA) assuming quadrature phase-shift keying (QPSK) and maximal-ratio-combining (MRC) in a mobile radio communication environment. The results are based on analysis, assuming a flat Rayleigh fading channel with omni-directional antennnas and considering the azimuthal plane only. The analytical BER is derived as a function of the spatial fading correlation for both types of antenna arrays. Results show that for similar aperture sizes the UCA outperforms the ULA when considering all angles-of-arrival. However, there is considerable variability over central angle-of-arrival (AOA) for low-to-moderate angle spreads. For angles-of-arrival concentrated near the broadside of the linear array, the ULA typically performs as well as or better than the UCA. A truncated Gaussian AOA (AOA) distribution is assumed to model spatial correlation and the numerical results focus on four element arrays.     

A Study of Infrared Photonic Crystal Devices Using New ADI-FDTD Algorithm

To investigate the infrared photonic crystal devices numerically, the traditional finite-difference time-domain (FDTD) method has been modified by combining with a new alternating direction implicit (ADI) algorithm. An improvement of two-five in speed over previous FDTD methods can be obtained by calculating the envelope rather than the fast-varying field, and the numerical errors are minimized. Consider the isolated localized coupled-cavity modes, the phenomenon of eigenmode splitting has been observed when the coupled-cavity structures in two dimension triangular dielectric photonic crystals are simulated. The results are in good agreement with experiments.     

Feasibility of adding a personal communications network to anexisting fixed-service microwave system

This paper examines the feasibility of adding a personal communication network (PCN) to a frequency band which is already allocated to fixed-service microwave systems. To achieve this goal, spread spectrum techniques are used to spread narrowband PCN signals into wideband. The forward and reverse link performance of PCN users under the influence of the microwave system and the influence of PCN users on the microwave system are both examined. It is proven that spectrum sharing between the PCN network and microwave systems is indeed feasible. Although our analysis is done based upon the consideration of only one microwave system, it can be easily extended to allow the appearance of two or more microwave systems     

COD: alternative architectures for high speed packet switching

Architectures for packet switches are approaching the limit of electronic switching speed. This raises the question of how best to utilize advances in photonic technology to enable higher speeds. The authors introduce cascaded optical delay line (COD) architectures. The COD architectures utilize an extremely simple distributed electronic control algorithm to configure the states of 2×2 photonic switches and use optical fiber delay lines to temporarily buffer packets if necessary. The simplicity of the architectures may also make them suitable for “lightweight” all-electronic implementations. For optical implementations, the number of 2×2 photonic switches used is a significant factor determining cost. The authors present a “baseline” architecture for a 2×2 buffered packet switch that is work conserving and has the first-in, first-out (FIFO) property. If the arrival processes are independent and without memory, the maximum utilization factor is ρ, and the maximum acceptable packet loss probability is ϵ, then the required number of 2×2 photonic switches is O(log(ϵ)/log(γ)), where γ=ρ²/(ρ²+4-4ρ). If one modifies the baseline architecture by changing the delay line lengths then the system is no longer work conserving and loses the FIFO property, but the required number of 2×2 photonic switches is reduced to O(log[log(ϵ)/log(γ)]). The required number of 2×2 photonic switches is essentially insensitive to the distribution of packet arrivals, but long delay lines are required for bursty traffic     

Heat transfer performance of a double-loop separate-type heat pipe: Measurement results

An experimental study is presented for the heat transfer performance of a rectangular double-loop natural circulation system, in which the condensers are made of double tubes with water-steam as the working fluid. Detailed temperature measurements of the core fluid and the wall are made, from which overall heat transfer coefficients for the evaporator, condensers, and entire system are obtained. Parametric studies of the liquid charge level, fluid properties, and heating or cooling conditions on the heat transfer performance are presented and correlation equations are given. The results show that the overall heat transfer coefficients for the evaporator, condensers, and entire loop are all increasing with decreasing liquid charge level. Overhead phenomena at low liquid charge level and thermal oscillation at some situations are also observed and discussed.     

High strain rate compression behavior for Sn-37Pb eutectic alloy, lead-free Sn-1Ag-0.5Cu and Sn-3Ag-0.5Cu alloys

This paper emphasized on studying the high strain-rate compression behavior of the unleaded Sn-3Ag-0.5Cu (SAC305), Sn-1Ag-0.5Cu (SAC105) solders and the traditional Sn-37Pb eutectic solder. The split Hopkinson pressure bar (SHPB) apparatus was used to conduct high strain rate tests in order to characterize the associated high rate mechanical response of these alloys. Specimens were tested at strain rates ranging from 380 to 3030 s⁻¹ to obtain the dynamic stress-strain relationship for the Sn-37Pb, SAC305 and SAC105 alloys. The tested soft and ductile samples experienced a large amount of elastoplastic deformation due to impact test. In the high strain rate range studied, limited strain rate hardening effect was observed for SAC305, SAC105 and Sn-37Pb alloys studied. The strain rate sensitivity parameter (m) related to the power law creep equation was also calculated for the present solder materials at specific strain values. In addition, the saturation stresses for the leaded and lead-free solders at the strain rate range studied are also reported.