短纤维/橡胶发泡复合材料的微观结构及拉伸破坏机理

对锦纶短纤维增强的NR发泡材料的微观结构及拉伸破坏行为进行了研究，并分析了其破坏机理。采用未处理短纤维增强的NR发泡材料中短纤维成为泡孔的成核点，并大部分悬空在泡孔中，拉伸破坏时泡壁与短纤维结合处容易出现应力集中，成为裂纹的起始点，失效时短纤维大部分被抽出；预处理短纤维能与橡胶基体之间产生良好的粘合，从而处于橡胶基体中。其短纤维增强的NR发泡体拉伸产生的裂纹扩展时遇到纤维，纤维能起到承载应力、使应力转向、阻止裂纹扩展的作用，一定程度上改善了复合材料的拉伸强度等物理性。     

基于电子商务的大学园区网络平台建设的SWOT分析——以河南郑州龙子湖高校区为例

国内各大高校区的建立,一方面加强了地方的教育,另一方面,利用已有高校区的地理,文化等优势,融合电子商务气息,建立一个基于大学园区的电子商务网络平台。不仅在充分利用已有资源的优势下,加强高校区内校间的联通性,同时为企业提供更多的商机,为学生提供更多的实践工作岗位。     

菲酐-纳米金修饰电极同时检测抗坏血酸、多巴胺和尿酸的研究

多孔结构的3,4,9,10-茈四甲酸二酐（PTCDA）作为骨架,用抗坏血酸做还原剂制备纳米金（GNPs）,制备了高催化活性的PrC—GNPs复合纳米材料。将该材料用于玻碳电极的修饰（GCE）,制得PTC—GNPs复合材料修饰的电极（PTC—GNPs／GCE）。该修饰电极能够同时对尿酸（UA）、多巴胺（DA）和抗坏血酸（AA）进行检测。分别使用循环伏安法（CV）和差分脉冲伏安法（DPV）对UA、DA和AA和在修饰电极上的电化学行为进行研究。实验结果表明,在pH=5．0的PBS缓冲体系中,该修饰电极对UA、DA和AA的线性响应范围分别为0．002～0．462mol／L、0．002～0．352mol／L和0．04～1．54mol／L。该传感在临床医学检测领域具有一定的应用前景。     

基于前向预测并行追踪的视频压缩传感方法

为了减小视频信号采集端的负担,提出一种基于压缩传感理论的视频压缩算法模型。该模型采用广义轮换矩阵获取视频帧的测量值,再结合视频压缩的运动补偿预测关键技术,消除视频帧间冗余。然后在并行贪婪追踪算法中引入前向预测技术作为重构算法,最终获取重构的压缩图像。实验对比了在不同算法下的重构图像和不同采样比下不同算法的重构PSNR值,然后利用所提方法得到视频序列的重构压缩图像。实验结果表明,该算法模型能较精确地获取压缩的视频图像,适合在视频压缩中应用。     

耐候性PP的研制

以聚烯烃弹性体（POE）为增韧材料、DICPK为结晶成核剂、BsSO4为无机填充剂，研制了耐候改性PP专用料。结果表明，当POE用量为5份、DICPK用量为0．3份、BaSO4用量为30份时，所得专用料能够满足耐候改性PP专用料的性能要求。     

Study on esterification of acrylic phenolic resin by maleic anhydride and photocrosslinking properties of the alkali‐soluble product

An alkali‐soluble, photocrosslinkable polymer was synthesized by esterification of OH groups of acrylic phenolic resin with maleic anhydride. The OH groups were formed by the ring‐opening reaction of epoxy groups of epoxy phenolic resin with acrylic acid. The esterification conditions were studied. The results showed that it is better to use tetramethyl ammonium bromide as catalyst than N,N‐dimethylbenzylamine. The conversion of maleic anhydride in acetone can reach about 80% at 56°C for 4 h. The purified product was characterized by IR, DSC, and TGA. The product containing acrylate and maleic acid monoester groups, above a certain content, can be dissolved in 1% Na₂CO₃ solution. The photocrosslinkable properties of the product were investigated through selection of photoinitiator, accelarator, crosslinkable diluent monomer, etc. The acrylate and maleic acid monoester group‐containing phenolic resin exhibited very good photocrosslinking behavior, since it contains double bonds from both acrylate groups and maleic acid monoester groups. The activity of photoinitiator decreases in the order: isopropylthioanthraquinone > benzoin ethyl ether (BE) > anthraquinone (AQ) > benzophenone > Michel ketone (MK) > 2,2‐diethoxyacetophenone. The combination of some photoinitiators showed synergistic effects. The order of increasing activity for the accelerator is as follows: MK > ethyl p‐(dimethylamino)benzoate > N,N‐dimethylaniline > triethanolamine. The optimum diluent monomer is trimethylolpropane trimethacrylate. The gel content of the mixture of the resin and trimethylolpropane trimethacrylate could reach 85% using the combined photoinitiators of BE and AQ under UV exposure for 120 s. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1607–1614, 2005     

传热设备自动清洗纽带的开孔结构优化研究

对设有开孔结构的自转清洗纽带进行了传热特性及流阻特性研究。结构优化试验的结果表明 :摩擦阻力和传热强化都随开孔面积比率的增大表现出先上升后下降的趋势 ,传热强化的幅度在 2 %— 18%之间 ,摩擦阻力系数在开孔率 18%时最大 ,其中 7#开孔比率纽带的综合性能最佳。因此 ,这种开孔结构的纽带更宜用于中低Re工况下应用 ,在 2 .0m/s以上的高流速工况下应采用高开孔率结构的纽带或螺旋带     

C/C复合材料在火箭发动机和飞机上的应用

C／C复合材料具有高强度、高刚度、低密度、耐高温的性能，现代高性能运输机、战斗机和火箭发动机等飞行器都把采用C／C复合材料代替某些常规金属结构作为提升其飞行性能的重要途径。     

悬浮液进样-火焰原子吸收光谱法测定茶叶中的微量铬

将茶叶悬浮于琼脂胶体中制成悬浮液 ,直接喷入空气 -乙炔火焰 ,用火焰原子吸收光谱法测定茶叶中的微量铬 ,方法简便、快速、灵敏度和精密度高、测定结果与用灰化法处理样品一致 ,检验表明 ,两种样品前处理方法之间无显著性差异。相对标准偏差为 3.4 %～ 6 .1% ,加标回收率为 95 .7%～ 10 3.8 %。     

Clustering-driven watershed adaptive segmentation of bubble image

In order to extract froth morphological feature, a bubble image adaptive segmentation method was proposed. Considering the image’s low contrast and weak froth edges, froth image was coarsely segmented by using fuzzy c means (FCM) algorithm. Through the attributes of size and shape pattern spectrum, the optimal morphological structuring element was determined. According to the optimal parameters, some image noises were removed with an improved area opening and closing by reconstruction operation, which consist of image regional markers, and the bubbles were finely separated from each other by watershed transform. The experimental results show that the structural element can be determined adaptively by shape and size pattern spectrum, and the froth image is segmented accurately. Compared with other froth image segmentation method, the proposed method achieves much high accuracy, based on which, the bubble size and shape features are extracted effectively.