Plasma Radiofrequency Discharges as Cleaning Technique for the Removal of C–W Coatings

Erosion of materials by chemical and physical sputtering is one of the most concern of plasma wall interaction in tokamaks. In divertor ITER-like tokamaks, where carbon and tungsten are planned to be used, hydrogenated C–W mixed compounds are expected to form by erosion, transport and re-deposition processes. The selection of these materials as divertor components involves lifetime and safety issues due to tritium retention in carbon co-deposits. In this paper a cleaning technique based on RF (13.56 MHz) capacitively coupled H₂/Ar plasmas has been used to remove C–W mixed materials from test specimens. The dependence of the removal rate on the H₂/Ar ratio and on the plasma pressure has been investigated by X-ray photoelectron spectroscopy, atomic force microscopy, profilometry as regards the solid phase and by Langmuir probe and optical emission spectroscopy as regards the plasma phase. The best result has been obtained with a H₂/Ar ratio of 10/90 at a pressure of 1 Pa. An explanation based on a synergistic effect between physical sputtering due to energetic ions and chemical etching due to radicals, together with the pressure dependence of the ion energy distribution function, is given.     

Novel mesoporous aluminosilicate supported palladium-rhodium catalysts for diesel upgrading: II. Catalytic activity and improvement of industrial diesel feedstocks

Bimetallic PdRh catalysts (molar ratio Pd/Rh = 1 and 2) were prepared by impregnation of a mesoporous aluminosilicate (molar ratio Si/Al = 10 and 20). These materials are destined to be used in industrial processes aiming to improve diesel quality by hydrogenation and ring-opening of aromatic components. The four catalysts were examined for their activity in hydrogenation of naphthalene and tetralin model feedstocks, at 6 MPa, including in the presence of sulfur containing compounds. The capacity of one of these catalysts to improve the quality of hydrogenated industrial light cycle oil containing ≤50 wt ppm of sulfur was evaluated in a pilot plant. In these industrial conditions, the catalyst has a higher catalytic activity at lower temperature than a reference state of-the-art catalyst, giving a seven-point improvement of the cetane number at 280–300 °C and with formation of less than 10% of non-selective cracking products.     

Tuning the Hydrophobicity of a Mitochondria‐Targeted NO Photodonor

A few compounds in which the nitric oxide (NO) photodonor N‐[4‐nitro‐3‐(trifluoromethyl)phenyl]propane‐1,3‐diamine is joined to the mitochondria‐targeting alkyltriphenylphosphonium moiety via flexible spacers of variable length were synthesized. The lipophilicity of the products was evaluated by measuring their partition coefficients in n‐octanol/water. The obtained values, markedly lower than those calculated, are consistent with the likely collapsed conformation assumed by the compounds in solution, as suggested by molecular dynamics simulations. The capacity of the compounds to release NO under visible light irradiation was evaluated by measuring nitrite production by means of the Griess reaction. The accumulation of compounds in the mitochondria of human lung adenocarcinoma A549 cells was assessed by UPLC–MS. Interestingly, compound 13 [(9‐((3‐((4‐nitro‐3‐(trifluoromethyl)phenyl)amino)propyl)amino)‐9‐oxononyl) triphenylphosphonium bromide] displayed both the highest accumulation value and high toxicity toward A549 cells upon irradiation‐mediated NO release in mitochondria.     

Synthesis and characterization of ratiometric ion-sensitive polyelectrolyte capsules

Micrometer-sized polyelectrolyte capsules are synthesized, which have ion-sensitive fluorophores embedded in their cavities. As the membranes of the capsules are permeable to ions, the fluorescence of the capsules changed with the ion concentration. In particular, capsules sensitive to protons, sodium, potassium, and chloride ions are fabricated and their fluorescence response analyzed. In order to allow for ratiometric measurements, additional fluorophores whose emission do not depend on the ion concentration and which emit a different wavelength are co-embedded in the capsule cavities.     

Evaluation of a method to reduce the redeposition of hydrogenated coatings containing carbon and tungsten in fusion reactors

The International Thermonuclear Experimental Reactor (ITER) project will be the first experimental fusion reactor with the objective to demonstrate the scientific and technological feasibility of fusion energy for commercial energy production. Erosion of materials by physical sputtering is the most fundamental of plasma-surface interactions in fusion reactor devices. Carbon and tungsten materials planned to be used in ITER divertor will be subjected to erosion, which produces local redeposition of mixed layers. Tritium retention in mixed materials is the major concern due to the limits imposed for safety reasons by nuclear licensing. The scavenging effect to reduce the redeposition phenomenon has been reported in low-pressure technical plasmas. In the present work, the minimization of co-deposits of hydrogenated C/W coatings by the injection of scavenger particles is analyzed.     

Risky driving among young Australian drivers II: Co-occurrence with other problem behaviours

This study examined the co-occurrence of risky driving with a range of externalising and internalising problems among 1055 young Australian drivers participating in an ongoing, 23-year longitudinal study. This issue was examined by: (1) investigating the co-occurrence of risky driving and other problem outcomes at 19-20 years; (2) exploring the rate of single and multiple problems among high, moderate and low young risky drivers and (3) investigating connections between risky driving in early adulthood and adolescent problem behaviours. Concurrent and longitudinal associations between risky driving and both substance use (alcohol, cigarette and marijuana use, binge drinking) and antisocial behaviour were found. However, risky driving generally appeared unrelated to internalising problems (depression, anxiety) and early sexual activity. Overall, young risky drivers varied considerably in the number and types of problem behaviours exhibited, although the great majority (70%) had displayed at least one other type of problem behaviour.     

The influence of economic incentives linked to road safety indicators on accidents: The case of toll concessions in Spain

The goal of this paper is to evaluate whether the incentives incorporated in toll highway concession contracts in order to encourage private operators to adopt measures to reduce accidents are actually effective at improving safety. To this end, we implemented negative binomial regression models using information about highway characteristics and accident data from toll highway concessions in Spain from 2007 to 2009. Our results show that even though road safety is highly influenced by variables that are not managed by the contractor, such as the annual average daily traffic (AADT), the percentage of heavy vehicles on the highway, number of lanes, number of intersections and average speed; the implementation of these incentives has a positive influence on the reduction of accidents and injuries. Consequently, this measure seems to be an effective way of improving safety performance in road networks.     

A torsion–effusion study on the sublimation of Cu2Te

The sublimation of Cu₂Te was studied and its vapor pressure was measured by the torsion method. In the covered temperature range, the temperature dependence of the total vapor pressure can be expressed by the following equation: log p (kPa)=(6.17±0.20)−(11 680±300)(K/T) (1084–1234 K). The sublimation process of Cu₂Te is incongruent, and Te(g) and Te₂(g) being the only gaseous species present in the vapor, the partial sublimation reactions were studied: Cu₂Te(s)→2Cu(s)+Te(g), 2Cu₂Te(s)→4Cu(s)+Te₂(g). The standard sublimation enthalpies of these reactions, Δ_rH⁰(298)=254±10 and 248±8 kJ, respectively, were derived by the second- and third-law treatment of the pressure data. The heat of formation of Cu₂Te, Δ_fH⁰(298)=−43±6 kJmol⁻¹, was also derived.