Automatic generation of IDEF0 models

This paper looks into a new area for knowledge-based system application, that of manufacturing modelling. Manual generation of IDEF0 models of manufacturing systems is time-consuming and inconsistent. However, the process can be automated to improve timeliness and consistency. In this paper, a knowledge-based manufacturing modelling system for the automatic generation of IDEF0 models is proposed. The system will not only greatly reduce the IDEF0 modelling time but will also eliminate the inconsistency problem of conventional IDEF0 modelling systems. The paper explains the knowledge-based approach and identifies the kinds of domain knowledge that are required for the construction of the knowledge-based manufacturing modelling system.     

控制决策的信息传输

本文讨论了在一条通讯通道上执行基本控制决策的信息传输问题。结果表明当且仅当第一条通道可模拟另一条通道的操作时，则第一条通道在任何情况下比另一条通道都有优势。     

PREPARATION OF BONE TUMOR THERAPEUTIC RADIOPHARMACEUTICALS ^153 Sm—EDTMP

ＰＲＥＰＡＲＡＴＩＯＮ　ＯＦ　ＢＯＮＥ　ＴＵＭＯＲ　ＴＨＥＲＡＰＥＵＴＩＣ　ＲＡＤＩＯＰＨＡＲＭＡＣＥＵＴＩＣＡＬＳ　~（１５３）Ｓｍ－ＥＤＴＭＰＬｕｏＳｈｕｎｚｈｏｎｇ（罗顺忠）；ＰｕＭａｎｆｅｉ（蒲满飞）；ＱｉａｏＪｉａｎ（谯健）；ＬｉｕＺｈｏｎ?..     

二阶A型Cooper变换的增强型

对二阶Ａ型Ｃｏｏｐｅｒ变换进行增强，放宽可用性条件，并证明了其正确性，最后举例说明其应用。     

High throughput VLSI DSP using replicated finite rings

This paper discusses strategies for implementing DSP systems using residue replication. The theory, recently introduced by two of the authors, uses formal polynomial ring mappings, from binary representations, to direct product ring implementation of integer processing arrays. The mapping produces completely independent computational arrays each computing over the same ring. This paper describes an architecture and processing array to implement, and take advantage of, the special computational ring structures that result from the mapping. A brief review of the theory and mapping techniques, is followed by the discussion of the architecture and VLSI design of an efficient inner product processing array using Fermat Primes.     

Design of optimum signals for the simultaneous estimation of timedelay and Doppler shift

The problem of joint estimation of time delay and Doppler shift is considered from the point of view of the Wigner distribution of the signal. A very efficient method of obtaining the optimum signal with minimum estimation error based on the convexity of the design region is developed. Practical applications, however, require the signal to satisfy other constraints which present complications in acquiring the optimum signal. A design approach based on the method of simulated annealing is suggested to solve for the optimum signal under constraints. The performance of the signals so obtained is evaluated and compared with that of signals obtained by synthesis     

连续驱动摩擦焊动态扭矩检测的新方法—VCMM法

连续驱动摩擦焊动态扭矩检测的新方法──ＶＣＭＭ法刘金合，罗键连续驱动摩擦焊扭矩是一个重要的工艺参数。摩擦焊扭矩是动态扭矩，具有时变性、速变性以及变化范围大等特点。现有的检测摩擦焊扭矩的方法均有一定的局限性’‘－’‘，本文提出了通过驱动主电机定子电压和...     

基于Apriori算法改进的关联规则提取算法

通过对Apriori算法的基本思想和性能的研究分析，认为Apriori算法存在一些不足。并且根据这些不足提出了相应的改进算法对Apriori算法进行优化，从而得到一种改进的Apriori算法，与原算法相比运算效率大大提高。     

A Novel Athermal 40-Channel DWDM Multi/Demultiplexer Based on the Combination of AWGs and Interleaver

An athermal 40-channel dense wavelength-division-multiplexing multi/demultiplexer using a novel combination technology is proposed. It consists of one 1times4 100- to 400-GHz spacing interleaver filter and four sub-arrayed-waveguide gratings (AWGs). The temperature-dependent wavelength shift of the combined device is successfully suppressed to 0.058 nm in the -20degC to 70degC temperature range. Moreover, the combined device's adjacent crosstalk (typically -35 dB) is much better than conventional AWGs (typically -25 dB).     

液体静力称量法液体密度测量及其不确定度评定

介绍了液体静力称量法测量液体密度的原理并给出液体密度的计算公式,对影响测量结果的各种因素作了详细的分析,并对各个分量所引入的不确定度进行了数值计算,得出液体密度最终测量结果的合成标准不确定度.