准噶尔盆地三台-北三台地区第三系勘探潜力分析

从沉积及储层组合、油气运移系统等方面全面剖析了准噶尔盆地三台-北三台地区第三系油气成藏条件，建立了成藏模式，对未钻探区勘探潜力进行了预测；通过分析，认为该区第三系储层物性主体差，断裂更多地表现为封闭性，导致沟通深部油气源的运移体系不畅，致使第三系圈闭不能有效捕获和储集油气。圈闭又比较匮乏，主体勘探潜力不大。北25井西背斜紧邻多期活动的甘诃子北断裂，第三系可能发育较好的储层，相对有利，北25井西背斜应是钻探第三系的首选目标。     

大港渣油掺兑催化油浆氧化沥青的研究

重油催化裂化外甩油浆中富含芳烃，可望在国产原油生产优质道路沥青上发挥作用。对大港环烷基渣油中掺兑一定比例的油浆后氧化改善道路沥青性质的可能性进行了研究，结果表明：渣油掺兑油浆氧化，不仅可以有效改善沥青延度，同时也为油浆的合理利用开辟了一条新途径。     

高速列车风量控制式通风系统的探讨

介绍了能够减轻乘坐高速列车时产生的耳朵不适感的风量控制式通风系统，该系统通过检测车内外的压力来控制进排气量，并且由模拟计算证实，该系统能够控制车内压力的波动，满足高速列车的舒适性需要。     

Effects of process-control agents on mechanical alloying of nanostructured aluminum alloys

The effects of the process-control agents (PCAs) stearic acid and methanol on the mechanical alloying (MA) of a nanostructured aluminum alloy (Al₉₃Fe₃Ti₂Cr₂) have been investigated. The dependency of the powder-particle sizes, grain sizes, atomic-level strains, lattice parameters, formation of solid solutions, and microstructural evolution of the aluminum alloy on the types of PCAs and their concentrations have been studied using a variety of analytical instruments including X-ray diffraction scanning electron microscopy, and transmission electron microscopy. The results clearly indicate that prevention of excessive cold welding of Al particles can be achieved by the addition of a PCA at the expense of reductions in the grain size, formation rate of solid solutions, and rate of microstructural refinement, all of which are desired in MA of the Al alloy. Furthermore, a PCA that is more effective in preventing excessive cold welding will also impose more hindrance to the MA process. These phenomena have been discussed in the light of the adsorption of the PCA on the metal surface and the lubricating function of the PCA.     

Quantification of the layer dispersion degree in polymer layered silicate nanocomposites by transmission electron microscopy

As the performance of polymer layered silicate nanocomposites strongly depends on their interior layer dispersion, quantification of the layer dispersion degree is needed. In this work, a new methodology was developed to determine the dispersion parameter D_0.1, based on the measurement of the free-path spacing distance between the single clay sheets from the transmission electron microscopy (TEM) images. Several examples of exfoliated, intercalated, and immiscible composites were studied. It was found that the exfoliated composites had D_0.1 over 8%, while that of intercalated composites were between 4 and 8%. In the case of intercalation, a high frequency peak appeared at a short spacing distance in the histogram, which was a characteristic of the intercalation, distinct from the exfoliation. The main utility of this TEM methodology is for the quantification of exfoliated or intercalated samples with small number of layers with stacks. The dispersion parameter D_0.1 below 4% was suggested to classify as immiscible. A unique advantage of the TEM measurement is that the dispersion degree of different fillers can be counted individually.     

建筑陶瓷企业实施精益生产研究

分析了建筑陶瓷企业实施精益生产的条件和当前推行精益生产的主要障碍，对应用中存在的问题进行了分析并提出了相关建议。     

Efficient Legendre moment computation for grey level images

Legendre orthogonal moments have been widely used in the field of image analysis. Because their computation by a direct method is very time expensive, recent efforts have been devoted to the reduction of computational complexity. Nevertheless, the existing algorithms are mainly focused on binary images. We propose here a new fast method for computing the Legendre moments, which is not only suitable for binary images but also for grey level images. We first establish a recurrence formula of one-dimensional (1D) Legendre moments by using the recursive property of Legendre polynomials. As a result, the 1D Legendre moments of order p, L_p=L_p(0), can be expressed as a linear combination of L_p-1(1) and L_p-2(0). Based on this relationship, the 1D Legendre moments L_p(0) can thus be obtained from the arrays of L₁(a) and L₀(a), where a is an integer number less than p. To further decrease the computation complexity, an algorithm, in which no multiplication is required, is used to compute these quantities. The method is then extended to the calculation of the two-dimensional Legendre moments L_pq. We show that the proposed method is more efficient than the direct method.     

冗余磁盘阵列的故障容错分析

本文在介绍冗余磁盘阵列(RAID)的故障容错机理之后,着重研究了设备故障对RAID系统可靠性的影响.其平均持续正常工作时间和系统在线修复设备故障容许的平均间隔时间的计算结果表明,只要在一定的容许时间内替换或修复故障磁盘,系统可保持持续正常工作状态.     

化学镀Ni—P镀层的X射线衍射研究

根据X射线衍射分析结果,对化学镀高P(含P>11wt％或19at％)Ni-P镀层加热时效时,镀层成分和加热温度对结构转变的影响作了研究,结果表明,高P共晶、过共晶(含P>11wt％或19at％)合金的结构转变有如下特征:(1)相同加热时效条件下,Ni-P合金的结构转变与成分有密切关系:(2)对同一成分的过共晶合金,Ni-P合金的结构转变与时效温度密切相关;(3)过共晶合金在290～360℃温度范围内时效处理,出现Ni_xP_y介稳相,X射线衍射分析认为Ni_xP_y为Ni_(12)P_5。