PVInSb红外探测器的阻抗——频率特性分析

通过理论计算和实际测试，给出了ＰＶＩｎＳｂ红外探测器的低频阻抗－频率特性曲线，结合检测阻抗／动态电阻的方法和阻抗－频率特性曲线的变化规律，分析讨论了ＰＶＩｎＳｂ红外探测器的阻抗与动态电阻的异同，从而说明在涉及ＰＶＩｎＳｂ红外探测器的阻抗／动态电阻时，即使在低频范围也要具体考虑频率因素的影响。     

Multistage amplifier topologies with nested Gm-Ccompensation

This paper presents a multistage amplifier for low-voltage applications (<2 V). The amplifier consists of simple (noncascode) low gain stages and is stabilized using a nested transconductance-capacitance compensation (NGCC) scheme. The resulting topology is similar to the well known nested Miller compensation (NMC) multistage amplifier, except that the proposed topology contains extra G _m feedforward stages which are used to enhance the amplifier performance. The NGCC simplifies the transfer function of the proposed multistage amplifier which, in turn, simplifies its stability conditions. A comparison between the NGCC and NMC shows that the NGCC has wider bandwidth and is easier to stabilize. A four-stage NGCC amplifier has been fabricated using a 2-μm CMOS process and is tested using a ±1.0 V power supply. A dc gain of 100 dB has been measured. A gain bandwidth product of 1 MHz with 58° of phase margin and power of 1.4 mW can be achieved. The op amp occupies an active area of 0.22 mm². Step response shows that the op amp is stable     

Boundary Constrained Swept Surfaces for Modelling and Animation

Due to their simplicity and intuitiveness, swept surfaces are widely used in many surface modelling applications. In this paper, we present a versatile swept surface technique called the boundary constrained swept surfaces. The most distinct feature is its ability to satisfy boundary constraints, including the shape and tangent conditions at the boundaries of a swept surface. This permits significantly varying surfaces to be both modelled and smoothly assembled, leading to the construction of complex objects. The representation, similar to an ordinary swept surface, is analytical in nature and thus it is light in storage cost and numerically very stable to compute. We also introduce a number of useful shape manipulation tools, such as sculpting forces, to deform a surface both locally and globally. In addition to being a complementary method to the mainstream surface modelling and deformation techniques, we have found it very effective in automatically rebuilding existing complex models. Model reconstruction is arguably one of the most laborious and expensive tasks in modelling complex animated characters. We demonstrate how our technique can be used to automate this process.     

Traffic analysis of heterogeneous mobile cellular networks using “wrap-up” cell structure

In this paper, we develop a tool for evaluating performance of a heterogeneous mobile network under different traffic conditions. The traffic condition is specified in a cluster of seven heterogeneous base stations, and “wrap-up” cell structure is applied to account for the traffic that crosses the boundary of the cluster. The performance of the network is specified in metrics which can be computed using the algorithm developed. These metrics relate to call rejection, i.e. the blocking of new calls, and the termination of handoff calls, as well as the carried traffic i.e. the expected number of ongoing calls in a station. These metrics are either measured for a single base station in a cluster, or measured for the average over the whole cluster. We apply the algorithm to some hypothetical data and present the numerical results. We also consider approximating a heterogeneous model with a simpler homogeneous model. Through some numerical results, we demonstrate the magnitude of errors that could result in the approximation.     

用瞬态频率波动法诊断齿轮故障

利用瞬态频率波动法实现频率调制信号的解调，提取齿轮的局部裂纹信息，并通过黄河ＴＮ２５２型汽车变速器疲劳试验的信号分析来验证。     

在3．39μm波段甲烷吸收特性的测量与应用研究

报道了甲烷气体在３．３９μｍ波段吸收特性的研究结果，及其在３．３９μｍ波段多波长干涉测量中的应用。通过改变甲烷吸收室的充气参数，使激光器工作在双等光强工作点，并完成了绝对距离的干涉测量。     

高强度船板纵裂纹的成因及预防

针对高强度船板纵裂纹轧后退废过高的现状，分析原因并优化冶炼、连铸工艺及操作，有效地降低高强度船板的退废率。     

Testing of the multi-application small light water reactor (MASLWR) passive safety systems

Experimental thermal hydraulic research has been conducted at Oregon State University for the purpose of assessing the performance of a new reactor design concept, the multi-application small light water reactor (MASLWR). The MASLWR is a pressurized light water reactor design with a net output of 35 MWe that uses natural circulation in both normal and transient operation. Due to its small size, portability and modularity, the MASLWR design is well suited to help fill the potential need for grid appropriate reactor designs for smaller electricity grids as may be found in developing or remote regions. The purpose of the OSU MASLWR test facility is to assess the operation of the MASLWR under normal full operating pressure and full temperature conditions and to assess the passive safety systems under transient conditions. The data generated by the testing program will be used to assess computer code calculations and to provide a better understanding of the thermal-hydraulic phenomena in the design of the MASLWR NSSS. During this testing program, four tests were conducted at the OSU MASLWR test facility. These tests included one design basis accident and one beyond design basis accident. During the performance of these tests, plant operations to include start up, normal operation and shut down evolutions were demonstrated successfully.     

Testing the robustness of CIECAM02

CIE TC8‐01 has adopted a new color appearance model: CIECAM02¹ replaces the CIECAM97s.² The new model consists of a number of refinements and simplifications of the CIECAM97s color appearance model. This article describes further tests to the robustness of the forward and reverse modes. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 99–106, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20087     

剖析半悬挂减速机故障的产生与对策

介绍了半悬挂减速机的工作原理，分析其故障原因，实施相应的解决对策。