Linearized method: A new approach for kinetic analysis of central dopamine D(2) receptor specific binding

We proposed a new method (;linearized method') to analyze neuroleptic ligand-receptor specific binding in a human brain using positron emission tomography (PET). We derived the linear equation to solve four rate constants, k(3), k(4), k(5), k(6) from PET data. This method does not demand a radioactivity curve in plasma as an input function to the brain, and can perform fast calculations in order to determine rate constants. We also tested the nonlinearized method including nonlinear equations which is a conventional analysis using plasma radioactivity corrected for ligand metabolites as an input function. We applied these methods to evaluate dopamine D(2) receptor specific binding of [(11)C] YM-09151-2. The value of B(max)/K(d)=k(3)/k (4) obtained by the linearized method was 5.72+/-3.1 which was consistent with the value of 5.78+/-3.4 obtained by the nonlinearized method.     

Anatomically constrained electrical impedance tomography for anisotropic bodies via a two-step approach

Discusses the inclusion of anatomical constraints and anisotropy in static Electrical Impedance Tomography (EIT) using a two-step approach to EIT. In the first step, the boundaries between regions of different conductivities are anatomically constrained using Magnetic Resonance Imaging (MRI) data. In the second step, the conductivity values in different regions are determined. Anisotropic conductivity regions are included to allow better modeling of the muscle regions (e.g., skeletal muscle) which exhibit a greater conductivity in the direction parallel to the muscle fiber. This two-step approach is used to reconstruct the conductivity profile of a canine torso, illustrating its potential application in extracting conductivity values for bioelectric modeling.     

Packing products for customers: an ergonomics evaluation of three supermarket checkouts

The introduction of laser scanners at supermarket checkout areas has resulted in previous ergonomics studies focusing specifically on the scanning process and associated cumulative trauma disorders in the hands and arms. Few studies have evaluated the increased musculoskeletal load and exertion of checkout staff when they are also expected to pack the products into bags for the customers. This paper describes an ergonomics evaluation of three different designs of checkout workstation, which require the operator to stand when they scan the products, pack them into plastic bags and transfer the packed bags to the customer. Musculoskeletal load and exertion associated with the different checkouts were measured using OWAS, heart rate recordings and ratings of perceived exertion. In addition, subjective rankings of the workstations were obtained and the productivity associated with each design examined as part of the evaluation. Some of the variables measured showed significant differences in postural load between the workstations. The results of the evaluation formed the basis of recommendations for an improved workstation design. Some of the suggestions made to reduce postural load and increase productivity include positioning the weigh scale to the side and the bag frame beneath the scanner.     

Effect of substrate bias on the properties of plasma deposited organosilicone (pp-HMDSN) thin films

Organosilicone thin films have been deposited by plasma polymerization (pp) in a plasma enhanced chemical vapor deposition (PECVD) system using hexamethyldisilazane (HMDSN:C6H19Si2N) as a monomer precursor, at different biases of the stainless-steel substrate holder. The substrate bias affected film thickness, surface morphology, chemical composition and photoluminescence (PL) emission. For a negatively biased substrate, it is found that the film thickness is the minimum, while the porosity and PL emission are the maximum. For a positively biased substrate, the thickness and the ratio of Si/N are the maximum which correspond to a blue shift of the PL emission in comparison with the case of non-biased grounded substrate. In addition, the characterization of the plasma using a single cylindrical Langmuir probe has been performed to obtain information about both the electron density and the positive ion energy, where it can be concluded that the ion energy plays a major role in determining film thickness.     

Coherent addition of adjacent lasers by forked eigenstate operation

Forked laser eigenstates are shown to provide a powerful tool both to phase lock spatially separated laser oscillators and to add their powers coherently into a TEM(00) output beam. Coherent addition of the powers extracted from two fiber-coupled diode-pumped Nd:YAG channels is theoretically and experimentally demonstrated. Pure TEM(00) oscillation is obtained with a 20% optical-to-optical conversion efficiency. The coherence of the two-propagation-axis laser is proved, and single-frequency operation is demonstrated. The scalability of the scheme is discussed.     

Optical acceptance function of modified compound parabolic concentrators with linear corrugated reflectors

For reflective cylindrical concentrators the acceptance function, as determined in the meridian plane, remains constant for more oblique planes of incidence. However, if the reflective surface has a linear corrugated structure, it is possible to increase the acceptance in the meridian plane at the expense of reduced acceptance at a more oblique incidence. A ray-tracing study has been performed on the optical properties of troughlike compound parabolic concentrators (CPC's) with linear corrugated reflectors. Calculations of angular acceptance for a modified CPC with concentration C = x is presented. A possible application of this new concentrator is as a secondary concentrator for tracking parabolic troughs.     

Volterra series modeling of spatial light modulators

We present a multiple-input, single-output, weakly nonlinear model of spatial light modulators by use of a second-order Volterra series and describe an experimental method to measure the nonlinear transfer functions by means of sinusoidal perturbation and synchronous detection with a lock-in amplifier. We also present an application of this method to a liquid-crystal light valve.     

Spectral Measurement of the Film-Substrate Index Difference in Proton-Exchanged LiNbO(3) Waveguides

We report the spectral characterization of proton-exchanged lithium niobate (PE:LiNbO(3)) waveguides in terms of the variation of the refractive-index difference between the waveguiding layer and the substrate. The dispersion of the extraordinary refractive-index increase (deltan(e)) is measured from 405 to 1319 nm with several light sources. Two types of proton-exchanged waveguide, prepared under different conditions, are studied. These measurements should be of use in the optimization of PE:LiNbO(3) waveguides for nonlinear optical applications, particularly in second-harmonic generation in the blue-green wavelength region.