Correlations Among Signatures for Detection of Different Types of Fires

One way of overcoming the problem of false alarms encountered in a single parameter detection system due to non-fire stimulii is the simultaneous use of multiple signatures. Researchers have found significant benefits of multi-sensor detection in reducing false triggering. Appreciable interest has been expressed in using carbon monoxide (CO) or carbon dioxide (CO₂) gas sensors in combination with smoke sensors. The present study has been carried out to determine the correlation and inter-dependence between two different fire signatures like CO–OD (optical density), CO–CO₂, CO₂–OD. The signatures have been investigated using experimental measurements of a fire inside a closed compartment measuring 7 x 7 x 4.2 m. A range of fuels are used, and both smouldering and flaming combustion are examined. Attempts have been made to examine whether correlation coefficients between two signatures can form a basis of detection and be exploited as one of the components in multi- criteria fire detection algorithm. The CO/CO₂ ratio as a criterion for detector operation has also been examined and discussed in the light of existing literature and codal provisions.     

Column Kinetic Tests Assessing Geochemical Behavior of Mine Wastes in the Jerada Coal District (Morocco)

The Jerada anthracite mine in Morocco was abandoned in 2001 after producing approximately 20 million tonnes of solid waste. The acid generating potential of these wastes was determined by performing tests on five samples collected from relatively older and more recent waste deposits. No carbonate minerals were identified. Pyrite was the only sulphide mineral observed and much of it had been completely transformed into Fe-oxides. Analysis of the waste indicated low levels (<1 %) of Ca and Mg, while Fe and Al concentrations generally exceeded 5 %. Modified Sobek static tests and column kinetic tests were conducted for 24 months. The static test results were not conclusive (20 <net neutralising potential <20 Kg CaCO₃/t). Leachates from the kinetic tests for three of the five samples showed an initially acidic pH, while those of the remaining two became acidic by the end of the tests. Sulfate concentrations (SO₄ ^2?) decreased over time from 5000 to 200 mg/L.     

Prediction of seepage water pressure for slope stability at the Gol-E-Gohar open pit mine

Slope stability accidents are one of the leading causes of destruction at open pit mining operations. Such interception of the seepage water results in the water inflow from the surrounding aquifer towards the mine excavations. In order to design an effective drainage scheme for an open pit mine, prediction of water inflow into the pit is essential. These changes have resulted in some failures and instability problems in different parts of Gol-E-Gohar iron open pit mine. It seems that main parameters which effect the failure and instability of the mine slopes are high pressure of groundwater and system of discontinuities (faults, joins, and bedding planes), which intersect the pit walls. The analysis results indicate that stability of the final pit slopes is sensitive to multi-planar failures and confined water in the walls pit is also a factor adversely affecting the stability. Problems associated with groundwater at the site were also assessed with the analyses of piezometric level and groundwater inflow.     

Substrate Stimulated Orientation for Pure Aluminum

Oriented materials are of great importance, but their formation is rarely described. Here, nine Al/Al₂O₃ systems were designed to identify the dominant factors. Electron back-scattered diffraction indicates that the new Al crystal(s) with one or multiple orientation(s) can be stimulated by one single-crystal Al₂O₃ substrates. Synchrotron radiation diffraction shows that the preferred orientation(s) is/are determined based on the initial stage of the liquid–solid transition. The nonpreferred orientation can be suppressed through competition.

     

Sintering and Briquetting Synergy in Blast Furnace Smelting

Metallurgist - The article describes the concept of partially replacing the sinter in a blast furnace charge with extrusion briquettes to form the basis for sintering and briquetting synergy. The...     

Remelting of Iron Shavings with the Synergistic Effect of Minimum Metal Loss

Metallurgist - The well-known technologies of remelting iron shavings lead to significant (30%) losses of metal. An electroslag smelting furnace with graphite electrodes is proposed for remelting...     

Combustion in Ni–Al System with Cu Additive (Powder or Rod). Experiment and Mathematical Model

Russian Journal of Non-Ferrous Metals - Experimental studies have been carried out with theoretical calculations of wave synthesis in the Ni–Al–Cu system using a mathematical model....     

Cerium Effect on the Phase Composition and Crystallization Behavior of Aluminum Casting Alloys Based on the Al–Mg–Si System

Russian Journal of Non-Ferrous Metals - Using a Thermo-Calc software package (TCAl4.0 database), unexplored data concerning the phase composition and crystallization behavior of...     

Ensuring Strength in Laser Welds Made Using the Dispersion-Hardened EP693 Nickel Alloy

Russian Journal of Non-Ferrous Metals - The process of making a weld using the heat-resistant EP693 alloy (Ni–Cr–W–Co–Co–Mo system) to make assemblies and components...     

Grain Refinement of Casting Aluminum Alloys of the Al–Mg–Si System by Processing the Liquid Phase Using Nanosecond Electromagnetic Pulses

Russian Journal of Non-Ferrous Metals - In this paper, using the AA 511 alloy of the Al–Mg–Si system as an example, it is shown that the irradiation of aluminum melts with nanosecond...