Comparing the Effectiveness of Coatings on Carbide andCermet Cutting Tool Inserts

A series of metal cutting experiments was performed on a CNC lathe to evaluate the performance of various coatings on different tool substrates. The workpiece material was plain medium carbon steel and the cutting tool materials were carbide and cermet inserts coated with various single as well as multilayer coatings. Machining was done under various cutting conditions of speed and feed-rate, and for various durations of Cutting. The output parameters studied were the cutting forces (axial, radial and tangential), the surface roughness of the workpiece, as well as the tool wear (crater and flank wear). From these results, the performances of the various cutting inserts are evaluated and compared. Results show that cutting forces are significantly lower when using coated cermets than when using coated carbides although different coatings on the same substrate also result in different cutting forces. However, there is less difference in the surface roughness of the finished workpiece for the various coatings and substrates.     

Correlation between late potentials duration and QTc dispersion: Is there a causal relationship?

This article is based on the current draft of a new AAMI equipment management standard (AAMI EQ56). Until now, no documentation has clearly specified the requirements for an equipment management program. At the time of the writing of this article, a February 1996 Committee Draft of the new standard was out for ballot and public review. Comments will be reviewed at a meeting of the AAMI Patient-Care Equipment Management Committee in June 1996, in conjunction with the AAMI Annual Meeting, and the standard could be formalized as early as October 1996. Readers should keep in mind that, while the final standard may differ somewhat from the material presented here, the author of this article and BI&T's staff felt that the interest of a very large portion of the AAMI membership warranted an advance article describing the content and general direction of the document.     

Continuous measurement of cardiac output by the Fick principle in infants and children: comparison with the thermodilution method

OBJECTIVE: To compare a system that continuously monitors cardiac output by the Fick principle with measurements by the thermodilution technique in pediatric patients. DESIGN: Prospective direct comparison of the above two techniques. SETTING: Pediatric intensive care unit of a university hospital. PATIENTS: 25 infants and children, aged 1 week to 17 years (median 10 months), who had undergone open heart surgery were studied. Only patients without an endotracheal tube leak and without a residual shunt were included. METHODS: The system based on the Fick principle uses measurements of oxygen consumption taken by a metabolic monitor and of arterial and mixed venous oxygen saturation taken by pulse- and fiberoptic oximetry to calculate cardiac output every 20s. INTERVENTIONS: In every patient one pair of measurements was taken. Continuous Fick and thermodilution cardiac output measurements were performed simultaneously, with the examiners remaining ignorant of the results of the other method. RESULTS: Cardiac output measurements ranged from 0.21 to 4.55 l/min. A good correlation coefficient was found: r2 = 0.98; P < 0.001; SEE = 0.41 l/min. The bias is absolute values and in percent of average cardiac output was - 0.05 l/min or - 4.4% with a precision of 0.32 l/min or 21.3% at 2 SD, respectively. The difference was most marked in a neonate with low cardiac output. CONCLUSION: Continuous measurement of cardiac output by the Fick principle offers a convenient method for the hemodynamic monitoring of unstable infants and children.     

X-ray electron spectroscopic investigation of the structure of double lead silicate glasses

The method of x-ray electron spectroscopy is used to investigate lead silicatexPbO(1 -x) · SiO₂ (x - 0.3, 0.4, 0.5, 0.55, 0.667) glasses. The concentration dependences of the spectra of inner Pb4f, Si2p, and Ols levels led to the conclusion that for low contents of PbO, lead is present in the glass in the form of modifying ions, whereas in high concentrations, it plays the role of glass former. Restructuring in the glass occurs for about 50% molar concentration of PbO. The Pb - O bond in the glass is more ionic than in PbO. With an increase in the PbO content in the glass, the Pb - O bond becomes closer to that of lead monoxide, i.e., is more covalent.     

Long-term follow-up of a randomized post-induction therapy trial in acute myelogenous leukemia (a Southeastern Cancer Study Group trial)

A phase III clinical trial was designed to determine if more intensive induction and consolidation therapy for acute myeloblastic leukemia increases the remission rate and prolongs survival. A minor objective was to determine if the use of non-cross resistant drugs was more effective than the same drugs used for induction. Patients with untreated leukemia between the ages of 15 and 50 were given daunorubicin 45 mg/m2 for the first 3 days of a 10-day continuous infusion of cytosine arabinoside, initially at a dose of 2000 mg/m2 but reduced to 100 mg/m2 because of toxicity. Those under 36 achieving a complete remission and with an histocompatible donor were assigned to a transplant arm. The rest were randomized to receive one of three consolidation arms: A, cytosine arabinoside, 200 mg/m2 daily for 7 days and daunorubicin 45 mg/m2 daily for 3 days for three courses; B, one course as in Arm A followed by amsacrine, 120 mg/m2 daily for 5 days followed by a 5-day continuous infusion of azacytidine, 150 mg/m2/day; C, thioguanine and cytosine arabinoside, 100 mg/m2 every 12 h and daunorubicin 10 mg/m2 daily for 5 days for three courses followed by four maintenance courses of cytosine arabinoside, 100 mg/m2 daily for 5 days and daunorubicin, 45 mg/m2 for 2 days every 13 weeks. From 1981 to 1986, 398 eligible patients were enrolled and 219 achieved a complete remission. The initial induction dose of cytosine arabinoside was reduced after five of 29 patients exhibited fatal gastrointestinal toxicity. Only 11 patients were assigned to the transplant arm. There were no significant differences in the consolidation arms. The 5 year disease-free survivals were 38, 31 and 27% in arms A, B, and C respectively. Intensive consolidation therapy with the same or different drugs used in induction was as effective as lower dose consolidation followed by maintenance therapy.     

A two-year measurement of rainfall attenuation of CW microwaves inSingapore

The authors present two-year statistics on the rainfall attenuation of 21.225 GHz vertically polarized CW microwave signals in Singapore. The CCIR recommendation is found to underestimate the microwave specific attenuation (dB/km) per path average rain rate (mm/h) as well as the accumulated time of attenuation exceeding preset levels. A negative exponential raindrop size distribution based on spherical droplets is constructed from the measured data