Laser direct-write gray-level mask and one-step etching for diffractive microlens fabrication

High-efficiency diffractive optical elements can be achieved by an increase in the number of phase levels. We present a technique for laser direct-write gray-level masks on high-energy-beam-sensitive glass and one-step etching on the gray-level mask plate for the production of high-efficiency diffractive optical elements. Sixteen-phase-level diffractive microlenses and microlens arrays with a focusing efficiency of approximately 94% have been realized by use of the one-step nonphotolithographic fabrication technique.     

Spectral Measurement of the Film-Substrate Index Difference in Proton-Exchanged LiNbO(3) Waveguides

We report the spectral characterization of proton-exchanged lithium niobate (PE:LiNbO(3)) waveguides in terms of the variation of the refractive-index difference between the waveguiding layer and the substrate. The dispersion of the extraordinary refractive-index increase (deltan(e)) is measured from 405 to 1319 nm with several light sources. Two types of proton-exchanged waveguide, prepared under different conditions, are studied. These measurements should be of use in the optimization of PE:LiNbO(3) waveguides for nonlinear optical applications, particularly in second-harmonic generation in the blue-green wavelength region.     

Pressure sounding of the middle atmosphere from ATMOS solar occultation measurements of atmospheric CO(2) absorption lines

A method for retrieving the atmospheric pressure corresponding to the tangent point of an infrared spectrum recorded in the solar occultation mode is described and applied to measurements made by the Atmospheric Trace Molecule Spectroscopy (ATMOS) Fourier-transform spectrometer. Tangent pressure values are inferred from measurements of isolated CO(2) lines with temperature-insensitive strengths by measuring the slant-column CO(2) amount and by adjusting the viewing geometry until the calculated column matches the observed column. Tangent pressures are determined with a spectroscopic precision of l%-3%, corresponding to a tangent-point height precision of 70-210 m. The total uncertainty is limited primarily by the quality of the spectra and ranges between 4% and 6% (280-420 m) for spectra with signal-to-noise ratios of 300:1 and between 4% and 10% for spectra with signal-to-noise ratios of 100:1. The retrieval of atmospheric pressure increases the accuracy of the retrieved-gas concentrations by minimizing the effect of systematic errors introduced by climatological pressure data, ephemeris parameters, and the uncertainties in instrumental pointing.     

Components for the implementation of free-space optical crossbars

We describe an optical system developed to form the basis of a 64 × 64 free-space optical matrix-matrix crossbar switch. The design and performance of each of the main optical components is discussed: lenses, diffractive optical elements, and polarizing beamsplitters, together with the optomechanical hardware design. For these components, throughput levels of -6.9 dB have been achieved, which is compatible with full system operation at 10(-12) bit error rates at ≥270 Mbits s(-1).     

一种基于模型优化自抗扰控制的新型定子磁链观测器

磁链观测是实现高性能转矩控制的基础.针对直接转矩控制系统低速时磁链观测精度差的问题,提出了一种基于模型优化自抗扰控制的新型定子磁链观测器,以定子磁链的频率响应函数为依据,根据其幅频和相频特性分析了磁链观测对电机参数变化的敏感性.分析结果表明,按照这种思路设计的定子观测器在不同的转速和负载条件下都能达到较为理想的观测精度...     

Influence of Matrices on Oxygen Sensing of Three Sensing Films with Chemically Conjugated Platinum Porphyrin Probes and Preliminary Application for Monitoring of Oxygen Consumption of Escherichia coli (E. coli)

Oxygen sensing films were synthesized by a chemical conjugation of functional platinum porphyrin probes in silica gel, polystyrene (PS), and poly(2-hydroxyethyl methacrylate) (PHEMA) matrices. Responses of the sensing films to gaseous oxygen and dissolved oxygen were studied and the influence of the matrices on the sensing behaviors was investigated. Silica gel films had the highest fluorescence intensity ratio from deoxygenated to oxygenated environments and the fastest response time to oxygen. PHEMA films had no response to gaseous oxygen, but had greater sensitivity and a faster response time for dissolved oxygen than those of PS films. The influence of matrices on oxygen response, sensitivity and response time was discussed. The influence is most likely attributed to the oxygen diffusion abilities of the matrices. Since the probes were chemically immobilized in the matrices, no leaching of the probes was observed from the sensing films when applied in aqueous environment. One sensing film made from the PHEMA matrix was used to preliminarily monitor the oxygen consumption of Escherichia coli (E. coli) bacteria. E. coli cell density and antibiotics ampicillin concentration dependent oxygen consumption was observed, indicating the potential application of the oxygen sensing film for biological application.     

The discovery of biomarkers for type 2 diabetic nephropathy by serum proteome analysis

Diabetic nephropathy (DN) is a serious kidney complication of diabetes, and constitutes the leading cause of end-stage renal disease. The earliest clinical evidence of DN is microalbuminuria, a term which refers to the appearance of small but abnormal amounts of albumin in the urine. However, screening methods for DN, such as biomarker assays, are yet to be developed for type 2 DN. In the present study, in an attempt to identify the biomarkers for initial diagnoses of type 2 DN, the protein profiles of human sera collected from 30 microalbuminuric type 2 diabetic patients were compared with those collected from 30 normoalbuminuric type 2 diabetic patients, via 2-DE. As a result, a total of 18 spots were determined to have different protein levels in the microalbuminuric patients. Twelve spots had lower protein levels of approximately 50%, and the other six had higher levels of approximately 100-300% as compared to the spots of normoalbuminuric patients. These spots were identified with ESI-Q-TOF (ESI-quadrupole-TOF) MS. Among the identified proteins, vitamin D-binding protein (DBP) and pigment epithelium-derived factor (PEDF) were verified by Western blotting. The results of this study indicate that the DBP may be employed as diagnostic and monitoring biomarkers of type 2 DN, contingent on further study into the matter.     

Homology modeling of the DNA-binding domain of human Smad5: a molecular model for inhibitor design

Members of the Smad protein family function as signal transducers of the transforming growth factor (TGF-beta) superfamily proteins. The human Smad5 protein, a signal transducer downstream of TGF-beta/BMP receptors, is composed of N-terminal DNA binding domain (MH1) and C-terminal protein-protein interaction domain (MH2) connected together by a linker motif. We used homology-modeling techniques to generate a reliable molecular model of the Smad5 MH1 domain based on the crystal structure of Smad3 MH1 domain. Our study presents the structural features of a BMP-regulated, R-Smad subfamily member (consisting of Smad1, Smad5 and Smad8) for the first time. This model provides a structural basis for explaining both functional similarities and differences between Smad3 and Smad5. Also, the structural model of this molecular target would be useful for structure-based inhibitor design because of its high accuracy. The results of our study provide important insights into understanding the structure-function relationship of the members of the Smad protein family and can serve to guide future genetic and biochemical experiments in this area.