Catalytic properties of aluminated sepiolite in ethanol conversion

The aluminated sepiolite, obtained by alkaline treatment with KAlO₂, as well as the silver-exchanged aluminated sepiolite were tested in ethanol conversion. The reactions were performed at 280°C and with 50 Torr of ethanol in He. After the alumination through KA1O₂, ethanol dehydrogenation and ethanol dehydration resulted from the Lewis acidity. The dispersion of silver led to a bifunctional catalytic system and the overall catalytic activity and the selectivity towards the acetaldehyde production increased. As a result of the Prins reaction, a significant yield in butadiene was observed.     

On the membrane phospholipids and their acyl group profiles of adrenal gland

The phospholipid composition and their acyl group profiles from subcellular fractions of guinea pig adrenal gland and the same fractions from the cortex and medulla of the bovine gland were compared. The phospholipids of guinea pig adrenal were enriched in diacyl-glycerophosphocholines (GPC) which comprised over 50% of the total phospholipids, but the proportions of ethanolamine and choline plasmalogens, sphingomyelin and diacyl-glycerophosphoserine (GPS) were lower in guinea pig adrenals as compared to the bovine adrenals. In the bovine adrenal, sphingomyelin and diacyl-GPS were enriched in the medulla, whereas diacyl-glycerophosphoinositol (GPI) were enriched in the cortex. Although lysolecithin was present (up to 4.5%) in the bovine adrenal, only trace amounts of this lipid were detected in the guinea pig adrenal. Characteristic acyl group profiles were found associated with each type of the phosphoglycerides in adrenal membranes. However, acyl group profiles of the phosphoglycerides were not greatly different either between the bovine and guinea pig adrenal or with respect to the type of subcellular membranes isolated. Diacyl-GPC were enriched in 16∶0 and 18∶1, but also contained considerable amounts of 18∶0, 18∶2 and 20∶4. Diacyl-GPE were enriched in 18∶0, 18∶1 and 20∶4, while diacyl-GPI, diacyl-GPS, as well as alkenylacyl-GPE, were enriched in 20∶4. The lysolecithin from bovine adrenal membranes contained mainly 16∶0, 18∶0 and 18∶1 with only trace amounts of the polyunsaturated fatty acids. Other polyunsaturated fatty acids, such as 22∶4 and 22∶6, are apparently not prominent in the phosphoglycerides from either the bovine or the guinea pig adrenal gland.     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

金属间化合物的研究现状及其最新发展趋势

主要介绍了金属间化合物的概念、发展历程、研究现状及几种常用金属间化合物的发展状况，并提出了该类材料的最新发展趋势。     

用模糊规划证明期望放出体的合理性

文章采用模糊规划的方法证明了期望放出体在放矿中的合理性,从而使放矿这个复杂的过程能方便地采用数学手段来处理。同时说明了如何在崩落法矿山利用期望体来解决实际生产中的放矿问题。     

Two possible emission mechanisms involved in the arc discharge method of carbon nanotube preparation

By investigating the morphologies and microstructures of the cathode deposits prepared by self-sustained arc discharge between graphite rods, we consider that there are two electron emission mechanisms occurring on the cathode: field emission and thermionic emission. The former occurs mainly on the edge of the growing surface, by which we can explain the formation of the outer hard shell of the cathode deposit; while the latter occurs mainly on the growing surface except for the edge area and it is the main cause for the growth of carbon nanotubes.     

Morphologies and microstructures of tree-like carbon produced at different reaction conditions in a CVD process

Centimeter-size multi-branched tree-like carbon structures have been generated by the catalytic chemical vapor deposition of toluene using ferrocene as the catalyst precursor and investigated by means of SEM, TEM, and EDX. It is found that a temperature of 1000-1200 °C and a carrier gas flow rate of 1000-2500 ml/min are necessary for the generation of the carbon trees. Their morphologies and microstructures change greatly with the changing reaction conditions. The fractal dimensions of the trees are calculated to quantitatively investigate the influence of different reaction temperatures on the morphologies.     

填充母料及其他常用塑料母料

塑料母料对推动塑料工业的迅猛发展起了很大作用，其主要特点是：可以简化生产工艺过程：原料混合方便，混炼质量均匀，提高生产效率及制品性能指标；减少粉尘飞扬及对设备的磨损；降低制品在换色时清洗螺杆的用料量；延长原料储存的保质期等。     

Electrochemical micromachining of nitinol by confined-etchant-layer technique

The confined etchant layer technique has been applied to fabricate complex three-dimensional microstructures on nitinol for the first time. HF and HNO₃ were locally and simultaneously electrogenerated at the mold surface to etch a nitinol workpiece. NaOH was used as an efficient scavenger to confine the etchant close to the mold. Cyclic voltammetry was employed to study the electrochemical behavior of a Pt electrode in the etching solution in order to choose an appropriate potential for etchant generation on the mold. The thickness of the confined etchant layer was estimated to be several micrometers by inspecting the deviation of the sizes of the etched spots from the sizes of those on the microelectrode. Thus, the composition of the electrolyte could be optimized for better etching precision. By optimizing the composition of the electrolyte, complex microstructures on a Pt-Ir mold bearing the logo “XMU” of Xiamen University were successfully fabricated on nitinol. The etched patterns were approximately negative copies of the mold, and the precision of duplication could easily reach the micrometer scale.