γ‐Irradiation effects on the thermal and structural characteristics of modified,grafted polypropylene

The effects of both the degree of grafting and γ irradiation on the thermal stability and structural characteristic of polypropylene‐graft‐polyvinylpyrrolidone and polypropylene‐graft‐polyvinylpyrrolidone modified with α‐cyano‐δ‐(2‐thienyl) crotononitrile were investigated. The employed techniques were thermogravimetric analysis, differential thermogravimetry, and X‐ray diffraction. The thermal stability of various polymeric substrates was investigated through the determination of the degradation temperature and activation energy of degradation. The effects of different parameters on the structural characteristics of different films were investigated through the determination of possible changes in the degree of ordering of the polymeric substrates. The results revealed that the thermal stability of the trunk polymer, grafted polymer, and polymer modified by α‐cyano‐δ‐(2‐thienyl) crotononitrile increased progressively with an increasing degree of grafting. The increase was, however, more pronounced for the sample undergoing the lowest degree of grafting. The activation energy of the thermal degradation process remained almost unchanged, and this indicated that the degradation processes of the different films followed almost the same mechanism. The γ irradiation at a dose of 60 kGy of the sulfur‐treated polymeric films [i.e., the polymeric films treated with α‐cyano‐δ‐(2‐thienyl) crotononitrile] reduced their thermal stability. This conclusion was reached by the consideration of the changes observed in the pre‐exponential factor of the Arrhenius equation due to different chemical and γ‐irradiation treatments. The degree of ordering, evidenced by X‐ray diffraction measurements of the trunk polymer, grafted polymer, and modified polymer, suffered a significant drop. This drop was much more pronounced for the sulfur‐containing polymeric materials. The observed drop in the degree of ordering of the polymeric substrates was taken as a measure of the structure collapse due to a certain treatment (degree of grafting and sulfur inclusion). The γ irradiation of the sulfur‐containing polymeric materials greatly increased their degree of ordering, which reached a value greater than that measured for the trunk polymer. Therefore, it was concluded that the thermal stability increased as the degree of ordering decreased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 506–515, 2006     

Ciprofloxacin Liposomes as Vesicular Reservoirs for Ocular Delivery: Formulation,Optimization, and In Vitro Characterization

Management of extraocular diseases is mainly limited by the inability to provide long-term drug delivery without avoiding the systemic drug exposure and/or affecting the intraocular structures and poor availability of drugs, which may be overcome by prolonging the contact time with the ocular system, for instance with liposomes. Development and optimization of reverse phase evaporation ciprofloxacin (CPF) HCl liposomes for ocular drug delivery was carried out using a 2⁵ full factorial design based on five independent variables. The effects of the studied parameters on drug entrapment efficiency (EE), particle size, and percentage of drug released after 1 and 10 h were investigated. The results obtained pointed out that the molar concentration of cholesterol was the predominant factor that increased the EE% of the drug and the particle size responses. The percentage of drug released after 1 h was significantly controlled by the initial CPF concentration while that after 10 h was controlled by molar cholesterol concentration. The designed liposomes had average particle sizes that ranged from 2.5 to 7.23 μm. In addition, liposomes revealed a fast release during the first hour followed by a more gradual drug release during the 24-h period according to Higuchi diffusion model.     

Generation on 3F4-3H6 transition in Tm3+ ion upon direct excitation of 3F4 state by nuclear pumped gas laser

The possibility of lasing in a YAP:Tm³⁺ crystal with ³F₄ level of the Tm³⁺ ion directly pumped by narrowband radiation of a gas laser operating in the middle IR range has been studied. The efficiency of the pumped energy conversion into spontaneous emission on the ³F₄-³H₆ transition in the Tm³⁺ ion was within 65–75%. The efficiency of generation with respect to the absorbed pumping energy was ～4%.     

Using degradation data to assess reliability: a case study on train wheel degradation

Degradation experiments are usually used to assess the lifetime distribution of highly reliable products, which are not likely to fail under the traditional life tests or accelerated life tests. In such cases, if there exist product characteristics whose degradation over time can be related to reliability, then collecting ‘degradation data’ can provide information about product reliability. In general, the degradation data are modeled by a nonlinear regression model with random coefficients. If we can obtain the estimates of parameters under the model, then the failure‐time distribution can be estimated. In order to estimate those parameters, three basic methods are available, namely, the analytical, numerical and the approximate. They are chosen according to the complexity of the degradation path model used in the analysis. In this paper, the numerical and the approximate methods are compared in a simulation study, assuming a simple linear degradation path model. A comparison with traditional failure‐time analysis is also performed. The mean‐squared error of the estimated 100pth percentile of the lifetime distribution is evaluated for each one of the approaches. The approaches are applied to a real degradation data set. Copyright © 2008 John Wiley & Sons, Ltd.     

Direct nn-Scattering Measurement With the Pulsed Reactor YAGUAR

Although crucial for resolving the issue of charge symmetry in the nuclear force, direct measurement of nn-scattering by colliding free neutrons has never been performed. At present the Russian pulsed reactor YAGUAR is the best neutron source for performing such a measurement. It has a through channel where the neutron moderator is installed. The neutrons are counted by a neutron detector located 12 m from the reactor. In preliminary experiments an instantaneous value of 1.1 × 10¹⁸/cm²s was obtained for the thermal neutron flux density. The experiment will be performed by the DIANNA Collaboration as International Science & Technology Center (ISTC) project No. 2286.     

Delivery of chemotropic proteins and improvement of dopaminergic neuron outgrowth through a thixotropic hybrid nano-gel

Chemotropic proteins guide neuronal projections to their final target during embryo development and are useful to guide axons of neurons used in transplantation therapies. Site-specific delivery of the proteins however is needed for their application in the brain to avoid degradation and pleiotropic affects. In the present study we report the use of Poly (ethylene glycol)-Silica (PEG-Si) nanocomposite gel with thixotropic properties that make it injectable and suitable for delivery of the chemotropic protein semaphorin 3A. PEG-Si gel forms a functional gradient of semaphorin that enhances axon outgrowth of dopaminergic neurons from rat embryos or differentiated from stem cells in culture. It is not cytotoxic and its properties allowed its injection into the striatum without inflammatory response in the short term. Long term implantation however led to an increase in macrophages and glial cells. The inflammatory response could have resulted from non-degraded silica particles, as observed in biodegradation assays.     

The catalepsy test: Its ups and downs.

The typical catalepsy (CPSY) test consists of placing an animal in an unusual posture and recording the time taken to correct this posture. This time is regarded as an index of the intensity of CPSY. CPSY is a robust behavior, and the lack of standardization does not usually hinder its actual detection. However, the intensity of the cataleptic effect is influenced by minor methodological differences, and interpretation and comparison of results across laboratories are difficult. The behavioral CPSY test can use any of several different apparatus, including wire grids, parallel bars, platforms, or pegs, to situate the animals in unusual positions. The most common is the bar test (BT), and despite its wide use in psychopharmacological research, even parameters of this test are not standardized. The present article reviews parameters chosen by investigators that measure CPSY. The methodological issues of repeated testing, scaling of scores, apparatus, animal weight, maximal test duration, behavioral criteria, and other influences are discussed. A brief review of the neuropharmacological basis of CPSY is included. It is argued that a universal, standardized BT be adopted by researchers. New data on a novel automated BT in the Digiscan Activity Monitoring System is presented. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Convergence of the inductive and deductive models in the measurement of reasoning abilities.

Reviews evidence concerning the congruence of the inductive and deductive models in logic and presents support for this congruence in the context of new test items designed to exemplify general-to-particular induction. Data from the Professional and Administrative Career Examination corroborate the logical foundations of deduction and induction as convergent models. Factor analysis of the items demonstrated factorial convergence, which lends additional support to the postulate of convergence. Implications for the understanding of cognitive processes and for psychometric practice are discussed in relation to such issues as the use of verbal and nonverbal test media, redundancy of measurement, and problem-solving strategies. (50 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)