Wavelet approximation-based affine invariant shape representation functions

In this paper, new wavelet-based affine invariant functions for shape representation are presented. Unlike the previous representation functions, only the approximation coefficients are used to obtain the proposed functions. One of the derived functions is computed by applying a single wavelet transform; the other function is calculated by applying two different wavelet transforms with two different wavelet families. One drawback of the previously derived detail-based invariant representation functions is that they are sensitive to noise at the finer scale levels, which limits the number of scale levels that can be used. The experimental results in this paper demonstrate that the proposed functions are more stable and less sensitive to noise than the detail-based functions.     

Projecting CLPR constraints

The presentation of constraints in a usable form is an essential aspect of Constraint Logic Programming (CLP) systems. It is needed both in the output of constraints, as well as in the production of an internal representation of constraints for meta-level manipulation. Typically, only a small subset \(\tilde x\) of the variables in constraints is of interest, and so an informal statement of the problem at hand is: given a conjunction \(c(\tilde x,\tilde y)\) of constraints, express the projection \(\exists \tilde y c(\tilde x,\tilde y)\) ofc onto \(\tilde x\) in the simplest form. In this paper, we consider the constraints of the CLP(R) system and describe the essential features of its projection module. One main part focuses on the well-known problem of projection inlinear arithmetic constraints. We start with a classical algorithm and augment it with a procedure for eliminating redundant constraints generated by the algorithm. A second part discusses projection of the other object-level constraints: equations over trees and nonlinear equations. The final part deals with producing a manipulable form of the constraints, which complicates the projection problem.     

Impacts of Global Climate Change Scenarios on Water Supply and Demand in Jordan

Abstract

The potential impact of global climate change is one of the least addressed factors in water resources planning in developing countries. The potential impacts of climate change are examined for Jordan, where a methodology is presented for improved management of water demand under the uncertainties associated with climate change. A temperature/precipitation sensitivity model is constructed and combined with water demand forecasts to project deficits for the year 2020. Deficit reducing options are then evaluated in terms of social and economic viability. The study concludes that only some of the deficits may be alleviated, illustrating the significance of considering climate change in planning for countries that already experience water imbalances.     

Green Synthesis of Silymarin–Chitosan Nanoparticles as a New Nano Formulation with Enhanced Anti-Fibrotic Effects against Liver Fibrosis

Background: Silymarin (SIL) has long been utilized to treat a variety of liver illnesses, but due to its poor water solubility and low membrane permeability, it has a low oral bioavailability, limiting its therapeutic potential. Aim: Design and evaluate hepatic-targeted delivery of safe biocompatible formulated SIL-loaded chitosan nanoparticles (SCNPs) to enhance SIL’s anti-fibrotic effectiveness in rats with CCl₄-induced liver fibrosis. Methods: The SCNPs and chitosan nanoparticles (CNPs) were prepared by ionotropic gelation technique and are characterized by physicochemical parameters such as particle size, morphology, zeta potential, and in vitro release studies. The therapeutic efficacy of successfully formulated SCNPs and CNPs were subjected to in vivo evaluation studies. Rats were daily administered SIL, SCNPs, and CNPs orally for 30 days. Results: The in vivo study revealed that the synthesized SCNPs demonstrated a significant antifibrotic therapeutic action against CCl₄-induced hepatic injury in rats when compared to treated groups of SIL and CNPs. SCNP-treated rats had a healthy body weight, with normal values for liver weight and liver index, as well as significant improvements in liver functions, inflammatory indicators, antioxidant pathway activation, and lipid peroxidation reduction. The antifibrotic activities of SCNPs were mediated by suppressing the expression of the main fibrosis mediators TGFβR1, COL3A1, and TGFβR2 by boosting the hepatic expression of protective miRNAs; miR-22, miR-29c, and miR-219a, respectively. The anti-fibrotic effects of SCNPs were supported by histopathology and immunohistochemistry (IHC) study. Conclusions: According to the above results, SCNPs might be the best suitable carrier to target liver cells in the treatment of liver fibrosis.     

The investigation of electrodeposited Cu2O/ITO layers by chronocoulometry process: effect of electrical potential

The thin films of Cu₂O are deposited by electrodeposition technique onto indium tin oxide (ITO)-coated glass substrate at different potentials. The precursor is an aqueous solution which contains respectively 0.05 M of CuSO₄ and citric acid at kept temperature of 60℃ and the applied potential varies within the {-0.4 V,-0.7 V} SCE range. Based on the chronocoulometry (CC) process, the electrochemical, structural and optical parameters are determined. We measured the current as function of potential within the {-0.4 V,-0.7 V} range and the higher current is found to be within the {-0.7 V,-0.3 V} band. The grain sizes are of 12.12 nm and 35.47 nm according to (110) and (221) orientations respectively. The high textural coefficient of 0.943 is recorded for the potential-0.7 V. The transmittance of 72.25 %, within the visible band, is obtained for the as-grown layer at-0.4 V and the band gap is found to be 2.2 eV for the electrodeposition potential of-0.7 V.     

A wide-range programmable frequency synthesizer based on a finite state machine filter

In this article, an FPGA-based design and implementation of a fully digital wide-range programmable frequency synthesizer based on a finite state machine filter is presented. The advantages of the proposed architecture are that, it simultaneously generates a high frequency signal from a low frequency reference signal (i.e. synthesising), and synchronising the two signals (signals have the same phase, or a constant difference) without jitter accumulation issue. The architecture is portable and can be easily implemented for various platforms, such as FPGAs and integrated circuits. The frequency synthesizer circuit can be used as a part of SERDES devices in intra/inter chip communication in system-on-chip (SoC). The proposed circuit is designed using Verilog language and synthesized for the Altera DE2-70 development board, with the Cyclone II (EP2C35F672C6) device on board. Simulation and experimental results are included; they prove the synthesizing and tracking features of the proposed architecture. The generated clock signal frequency of a range from 19.8?MHz to 440?MHz is synchronized to the input reference clock with a frequency step of 0.12?MHz.     

Comparison of alteplase (tissue plasminogen activator) high‐dose vs. low‐dose protocol in restoring hemodialysis catheter function: The ALTE‐DOSE study

Hemodialysis catheter (HDC) dysfunction due to thrombosis is common, and dysfunction incidence can reach up to 50% within 1 year of use. Although administration of intraluminal alteplase (tissue plasminogen activator [tPA]) is the standard of practice to pharmacologically restore HDC function, there are no evidence‐based guidelines concerning the optimal tPA dose. The purpose of this study was to compare the efficacy of 1.0‐mg vs. 2.0‐mg tPA dwell protocols in restoring the HDC function in thrombotic dysfunctional catheters. A retrospective, single‐center study was conducted on two independent cohorts of patients; the first (n = 129) received 2.0 mg tPA/catheter lumen, while the second (n = 108) received 1.0 mg tPA/catheter lumen. Kaplan–Meier and Cox regression analyses were performed to compare the catheter survival time between patients who received 1.0 mg tPA and those who received 2.0 mg tPA. Catheter removal occurred in 25 (19.4%) of those catheters treated with 1.0 mg tPA compared with 11 (10.2%) of catheters treated with 2.0 mg tPA (P = 0.05). The hazard ratio (HR) for catheter removal was 2.75 (95% confidence interval [^95%CI] = 1.25–6.04) for the 1.0‐mg tPA cohort compared with the 2.0‐mg tPA cohort. Correction added on 3 December 2012, after first online publication: The tPA cohort values were changed. Female gender (HR = 2.51; ^95%CI = 1.20–5.27) and age (HR = 0.96; ^95%CI = 0.94–0.98) were also associated with catheter survival. Our findings suggest that treatment of dysfunctional HDC with 2.0‐mg tPA dwells is superior to 1.0‐mg tPA dwells.     

Energy management strategy in cloud computing: a perspective study

Optimizing energy consumption in cloud computing is yet a challenge despite the diversity of the proposed energy management strategies. Indeed, and during our related work study we have observed that the different elements or components which should be considered in order to be able to properly manage energy consumption in a cloud computing context are not well defined and/or discussed in terms of importance. This makes the proper classification and/or comparison of the different proposed strategies or techniques very difficult. Consequently, this paper aims, on the one hand, at defining and discussing properly such components in order to create a guideline and, on the other hand, to ease both the classification and the comparison of these proposed strategies and techniques. Second and after discussing some common weaknesses related to the current energy consumption optimization techniques and methods, this paper proposes energy-saving technique which uses a novel load detecting policy. This policy is based on the median absolute deviation method which uses the median and the standard deviation to calculate upper and lower thresholds which aim to classify hosts into either overloaded or under-loaded state. Simulation results have shown better results of the proposed technique compared to the existing ones especially in reducing energy consumption and the number of virtual machine migrations in addition to better active host time. Indeed, we found that the average of saved energy is around 40% compared to the built in techniques in cloudSim.     

Matrix generation within a macroporous non-degradable implant for osteochondral defects is not enhanced with partial enzymatic digestion of the surrounding tissue: evaluation in an in vivo rabbit model

Articular cartilage defects are a significant source of pain, have limited ability to heal, and can lead to the development of osteoarthritis. However, a surgical solution is not available. To tackle this clinical problem, non-degradable implants capable of carrying mechanical load immediately after implantation and for the duration of implantation, while integrating with the host tissue, may be viable option. But integration between articular cartilage and non-degradable implants is not well studied. Our objective was to assess the in vivo performance of a novel macroporous, nondegradable, polyvinyl alcohol construct. We hypothesized that matrix generation within the implant would be enhanced with partial digestion of the edges of articular cartilage. Our hypothesis was tested by randomizing an osteochondral defect created in the trochlea of 14 New Zealand white rabbits to treatment with: (i) collagenase or (ii) saline, prior to insertion of the implant. At 1 and 3-month post-operatively, the gross morphology and histologic appearance of the implants and the surrounding tissue were assessed. At 3 months, the mechanical properties of the implant were also quantified. Overall, the hydrogel implants performed favorably; at all time-points and in all groups the implants remained well fixed, did not cause inflammation or synovitis, and did not cause extensive damage to the opposing articular cartilage. Regardless of treatment with saline or collagenase, at 1 month post-operatively implants from both groups had a contiguous interface with adjacent cartilage and were populated with chondrocyte-like cells. At 3 months fibrous encapsulation of all implants was evident, there was no difference between area of aggrecan staining in the collagenase versus saline groups, and implant modulus was similar in both groups; leading us to reject our hypothesis. In summary, a porous PVA osteochondral implant remained well fixed in a short term in vivo osteochondral defect model; however, matrix generation within the implant was not enhanced with partial digestion of adjacent articular cartilage.