EXTRACTION OF TRANSITION METALS FROM WOOD PULP FIBERS USING SUPERCRITICAL CARBON DIOXIDE

The supercritical fluid extraction of manganese and iron from solid matrix (wood pulp) is demonstrated experimentally. Supercritical carbon diodixe is used together with lithium bis(trifluoroethyl) dithiocarbonate (FDDC) as the ion-pairing reagent. The metal content of the pulp samples was determined by inductively couple plasma atomic emission spectroscopy (ICP-AES). Optimum conditions were determined to be 30 min each of static and dynamic extraction with 200 atm pressure at 40 °C. Thermomechanical pulp (TMP) extracted under these parameters exhibits an 80% decrease in manganese content, and 91% after a second, sequential extraction. The simultaneous removal of iron was found to be only 6% and supports evidence that it is much more strongly bound to the TMP matrix than manganese.     

Provisioning Methods for Bit-Rate-Differentiated Services in Hybrid Optical Networks

This paper addresses the problem of routing and wavelength assignment of bit-rate-differentiated optical services in a hybrid network. Hybrid optical networks are composed of resources, such as fiber links and photonic/electronic switches, that vary in their capabilities and transmission qualities. These networks are also responsible for the realization of optical services with varying quality-of-service (QoS) guarantees. In such networks, it is required to have a cost-effective assignment of the optical and electronic resources to these services in order to maximize the revenue of the network operator. This paper deals with optical services that are defined according to their tolerance to transmission impairments. We first divide the provisioning problem into two phases: (1) routing and (2) wavelength assignment and regeneration reservation. In the routing phase, a set of k-routes are generated to select from in the second phase, where each route optimizes a specific aspect of the problem (e.g., number of hops, maximum accumulated noise, etc.). The second phase, using the information about the resources along each route, attempts at finding the best wavelength allocation on that route such that the signal quality meets the service-level agreement (SLA). The second phase also uses the minimum number of regenerator ports on intermediate nodes for the purpose of wavelength translation and signal clean-up. Comparisons of the above scheme with a probing-based method, reveal substantial enhancements to the blocking performance with a maximum running time increase of 60%. In addition, the use of multiple routes provides higher reduction in the blocking probability over single-routing schemes. Moreover, the proposed, non-pessimistic, provisioning approach has a major impact on reducing the regeneration budget of the network.     

Design and Expected Performance of GISMO-2, a Two Color Millimeter Camera for the IRAM 30 m Telescope

We present the main design features for the GISMO-2 bolometer camera, which we build for background-limited operation at the IRAM 30 m telescope on Pico Veleta, Spain. GISMO-2 will operate simultaneously in the 1 and 2 mm atmospherical windows. The 1 mm channel uses a \(32 \times 40\) TES-based backshort under grid (BUG) bolometer array, the 2 mm channel operates with a \(16 \times 16\) BUG array. The camera utilizes almost the entire full field of view provided by the telescope. The optical design of GISMO-2 was strongly influenced by our experience with the GISMO 2 mm bolometer camera, which is successfully operating at the 30 m telescope. GISMO is accessible to the astronomical community through the regular IRAM call for proposals.     

Finite element modeling and simulation of proposed design magneto-rheological valve

Magneto-rheological (MR) valve is one of the devices generally used to control the speed of Hydraulic actuator of MR fluid. The performance of valve depends on the magnetic circuit design. Present study deals with a new design of MR valve. A mathematical model for the MR valve is developed and the simulation is carried out to evaluate the newly developed MR valve. The design of the magnetic circuit is accomplished by magnetic finite element software such as Finite Element Method Magnetic (FEMMR). The model dimensions of MR valve, material properties are taken into account. The results of analysis are presented in terms of magnetic strength H and magnetic flux density B. The simulation results based on the proposed model indicate that the efficiency of the proposed MR valve is superior to two other types of MR valves, under the same magnetic flux density. As a conclusion, the new valve design has improved the efficiency of MR valve significantly.     

Arylidene polymers XIX: Synthesis and properties of aromatic polyphosphate from diarylidenecycloalkanones

Polyphosphate esters were synthesized by interfacial polymerization of 2,5-bis(p-hydroxybenzylidene)cyclopentanone, 2,5-divanillylidenecyclopentanone, 2,6-bis(p-hydroxybenzylidene)cyclohexanone, 2,6-divanillylidenecyclohexanone or 2,7-bis(p-hydroxybenzylidene)cycloheptanone with phenyl phosphorodichloridate. The resulting polymers were characterized by elemental analysis, IR spectroscopy, solubility and viscometry measurements. The thermal properties of the polymers were evaluated by TGA measurements and correlated with their structural units. The crystallinity of all the polyphosphate esters was tested by X-ray analysis.     

Combinatorial selection of a small RNA that induces amplification of IncFII plasmids in Escherichia coli

Patients with arteriovenous malformation (AVM)-associated aneurysms are a well-recognized subset of the cerebrovascular disease population. The origin of these dual lesions is likely multifactorial, with hemodynamic stresses having a dominant influence. In most patients who present with hemorrhage, the aneurysm is the usual source. Since aneurysm rupture continues to carry a more significant morbidity and mortality when compared to AVM hemorrhage, the authors recommend that the aneurysm be treated first or simultaneously with the AVM in the majority of cases. Treatment of the AVM first is primarily reserved for patients who have suffered bleeds from resectable AVMs.     

Reliability of pain and stiffness assessments in clinical manual lumbar spine examination

BACKGROUND AND PURPOSE: The purpose of this study was to determine the intertherapist reliability of judgments of stiffness and pain at L-1 to L-5 made using posteroanterior (PA) central pressure testing. SUBJECTS: Three pairs of manipulative physical therapists with a minimum of 5 years of experience were asked to rate pain and stiffness in a total of 90 patients with low back pain. METHODS: Each pair of therapists assessed 30 patients within their own clinic, using their preferred technique to perform an examination using the PA central pressure test at the five lumbar levels. Each pair of therapists recorded their ratings of pain and stiffness. Reliability of judgments was evaluated by intraclass correlation coefficients (ICC) and percentage of exact agreement scores. RESULTS: The ICC values for pain judgments for the group as a whole ranged from .67 to .72, with agreement scores ranging from 31% to 43%. The ICC values for stiffness judgments ranged from .03 to .37, with agreement scores ranging from 21% to 29%. CONCLUSION AND DISCUSSION: Judgments of stiffness made by experienced manipulative physical therapists examining patients in their own clinics were found to have poor reliability, whereas pain judgments had good reliability. Further investigation of this test is required in order to develop a more reliable method of assessing PA stiffness.