The effect of quinoa germ on the quality properties of fresh whey-less cheese made by ginger (Zingiber officinale) extract as a coagulant

The effect of ginger extract (GE), as a milk coagulant, was investigated on the physicochemical, proteolysis, textural profiles and sensory properties of whey-less cheese containing quinoa germ powder (QGP; 0, 3, 6 and 9%) during storage. The results showed that with increasing QGP, the dry matter, fat, soluble nitrogen at pH 4.6 and free tryptophan and tryptophan amino acids increased and protein content decreased. Consequently, it is suggested that using 6% quinoa germ in the production of whey-less cheese made by GE as a coagulant can give the most desired product with no adverse effects on the quality and sensory properties.     

An investigation into the properties of ternary and binary cement pastes containing glass powder

The properties of binary and ternary cement pastes containing glass powder (GP) were examined. Hydration at early age was evaluated using semi-adiabatic calorimetry and at late ages using non-evaporable water content and thermogravimetric analysis. The transport characteristic was assessed by measuring electrical resistivity. The binary paste with slag showed the highest hydration activity compared to the binary pastes with GP and fly ash (FA). The results indicated that the pozzolanic behavior of the binary paste with GP was less than that of the binary pastes with slag or FA at late ages. An increase in the electrical resistivity and compressive strength of the binary paste with GP compared to other modified pastes at late ages was observed. It was shown that GP tends to increase the drying shrinkage of the pastes. Ternary pastes containing GP did not exhibit synergistic enhancements compared to the respective binary pastes.     

Effects of L-Cysteine on some characteristics of wheat starch

In this study the effects of L-Cysteine as a food additive on wheat starch characteristics before and after gelatinization were studied. L-Cysteine (63 mg/kg, starch basis) was added to slurry of wheat starch in water (30%, w/w). One set of samples was prepared by mixing it at 40 °C for 45 min. Another set was gelatinized at 100 °C for 45 min. The scanning electro-micrographs of the samples prepared at 40 °C in the presence of L-Cysteine showed some spots on the granules. However, thermal properties, X-ray patterns and the degree of crystallinity of the samples did not obviously change (P > 0.05); while a reduction in intrinsic viscosity, peak and final viscosities of the samples was observed. After gelatinization, intrinsic, peak and final viscosities of the samples were reduced. Some of these changes may indicate degradation of starch molecules in the presence of L-Cysteine, particularly after gelatinization.     

Inserting Different Charge Regions in Power MOSFET for Achieving High Performance of the Electrical Parameters

Silicon - In this paper a new lateral double diffused MOSFET is proposed which has better performance compared to the conventional MOSFET. The idea is applied by inserting two silicon windows in...     

A Silicon on Nothing LDMOS with Two Air Pillars in Gate Insulator for Power Applications

Silicon - This paper proposes a new silicon on nothing lateral double-diffused metal-oxide-semiconductor with two air gaps in the gate insulator (SON-APG LDMOS). Utilizing air for the buried layer...     

A systematic study on the effects of synthesis conditions of polyamide selective layer on the CO2/N2 separation of thin film composite polyamide membranes

Different top layer fabrication methods (amine-first, acid-first, spin coating), organic phase solvents (hexane, heptane, mixed hexane/heptane), acid acceptors (triethylamine, sodium carbonate, sodium hydroxide), and surfactant sodium dodecyl sulfate concentrations (0, 0.05, and 0.1 wt%) were utilized to fabricate thin film composite polyamide membranes for CO₂/N₂ separation. The results, according to an L9 orthogonal array of Taguchi approach, showed that employing acid-first method increases both CO₂ permeance and CO₂/N₂ selectivity of the membranes at a feed gas pressure of 3 bars. On the other hand, sodium hydroxide, and triethylamine should be used, as acid acceptors, to maximize CO₂ permeance and CO₂/N₂ selectivity, respectively. Moreover, the use of hexane solvent and 0 wt% surfactant led to maximum permeance, while, hexane solvent and 0.1 wt% surfactant were needed to reach the highest selectivity. The above level setting of synthesis parameters also resulted in the minimum sensitivity of the fabrication process to the noise factors effects. As shown by the analysis of variance, acid acceptor, and organic solvent types were the most influential parameters on CO₂ permeance and CO₂/N₂ selectivity, respectively. The effects of fabrication method and surfactant concentration, as single factors, on permeation/selectivity responses were also investigated.     

Hydrogen production employing Cu(BDC) metal–organic framework support in methanol steam reforming process within monolithic micro-reactors

Cu(BDC) metal–organic framework (MOF) was used as a support for the copper (Cu) catalyst applied in the methanol steam reforming (MSR) process at low temperatures (130–250 °C) with a feed WHSV = 9.2 h^?1 within the monolithic reactor. Also, the effects of diverse promoters were examined on the catalytic activities of the Cu/X–Cu(BDC) (X = Ce, Zn, Gd, Sm, La, Y, Pr) catalysts. Results showed that the Ce/Sm–Cu(BDC) supports exhibited highest activities, lowest reduction temperatures and largest specific surface areas, which caused highest distributions of the active copper metal nanoparticles on the supports. The reactor tests displayed that the activities of Cu/X–Cu(BDC) (X = Ce, Zn, Gd, Sm, La, Y, Pr) catalysts followed the order X = Ce > Sm > Y > La > Pr > Cu(BDC) > Zn > Gd. The highest activities of Ce and Sm containing catalysts were attributed to the presence of CeO₂ and Sm₂O₃ caused the oxygen vacancies on the catalyst surface which had positive effects on the methanol reforming process. The time-on-stream stability tests showed the highest resistance of the Cu/Ce–Cu(BDC) catalyst to the carbon formation during 32 h. Consequently, the Cu/Ce–Cu(BDC) with the highest stability, methanol conversion and carbon monoxide selectivity could be used in practical industrial applications.     

Hydrophobizing polyether sulfone membrane by sol-gel for water desalination using air gap membrane distillation

ABSTRACT

The hydrophobic polyether sulfone membranes were prepared by the sol-gel method to be applied in an air gap membrane distillation setup for desalination. The surface modifications were carried out using Trimethylsilyl chloride (TMSCl) and Methyltrimethoxysilane (MTMS) solutions. The membranes were characterized using Attenuated Total Reflection Infrared (ATR-IR) spectroscopy, Scanning Electron Microscopy (SEM), and Optical Contact Angle (OCA) methods. The effects of membrane preparation as well as operating conditions such as temperature difference, salt concentration, feed rotation speed, and cold-side temperature on membrane performance were investigated using central composite design method. It was found that feed temperature has the largest effect among the parameters on the permeation flux. The flow rate and salt rejection of the membrane in the optimum conditions were 4.47 Kg m^?2 h^?1 and 99.37%, respectively.     

Effects of yoghurt butter oils on rat plasma lipids,haematology and liver histology parameters in a 150‐day study

Although yoghurt butter oil as a fermented dairy product is widely consumed in several countries, its metabolic effects have not been fully elucidated. In this study, male Wistar rats were treated with standard diet, standard diet enriched with 10% or 20% (W/W) of either cow yoghurt butter oil (CYBO), sheep yoghurt butter oil (SYBO) or cottonseed oil (COT) for 20 weeks. Treatment of rats with CYBO or SYBO (at both concentrations) did not significantly influence haematological parameters, plasma lipids and liver histological structure. However, in contrast to popular belief, COT treatment at the higher dose induced leukocytosis, dyslipidaemia and liver steatosis.