Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Distribution of carbon contamination in MgAl2O4 spinel occurring during spark-plasma-sintering (SPS) processing: I – Effect of heating rate and post-annealing

Carbon contamination from the carbon paper/dies during spark-plasma-sintering (SPS) processing was examined in the MgAl₂O₄ spinel. The carbon contamination sensitively changes with the heating rate during the SPS processing. At the high heating rate of 100 °C/min, the carbon contamination having organized structures occurred over almost the entire area from the surface to deep inside the SPSed spinel disk. In contrast, at the slow heating rate of 10 °C/min, the carbon contamination having disordered structures occurred only around the surface area. The carbon phases transform into high pressure CO/CO₂ gases by post-annealing in air and lead to pore formation along the grain junctions. The pore formation significantly occurs at the high heating rate due to the large amount of the contaminant carbon phases. This suggests that if once the carbon contamination was formed in the materials, it is very difficult to remove the carbon phases from the materials.     

Reaction and diffusion of reactive disperse dye in nylon 6

The diffusion of a reactive disperse dye with a vinylsulfonyl group accompanied by simultaneous reaction with the amino end groups in nylon 6 was examined by the method of cylindrical film roll at 70°C and pH 2.2–8.0. The experimental diffusion profiles of the active and fixed species of the dye in nylon 6 were confirmed to be described by the diffusion equation accompanied by the chemical reaction with substrate taking the limited amount of the end groups into account, where the active species of dye were assumed to react only with the free base of amino end groups. The completion of the reaction with the amino end groups was observed in the first layer from the surface at pH 6.0–8.0. The value of diffusion coefficient was constant (8.0 × 10^?10 cm²/s) at all the pH's. The product of the second-order rate constant, k₂, of reaction of the dye and the dissociation constant, K_a, of the amino end groups was constant (k₂K_a = 4.0 × 10^?9 s^?1) at pH 2.2–8.0. The k₂ values of the reaction with various substrates for vinylsulfonyl and monochlorotriazinyl-reactive dyes were compared and the practical dyeing conditions were discussed.     

Structural Modulations in Monoclinic Tricalcium Silicate Solid Solutions Doped with Zinc Oxide, M(I), M(II), and M(III)

Structural modulations in solid solutions of C₃S doped with various amounts of ZnO were investigated via the selected-area electron diffraction method. Three monoclinic modifications (M(I), M(II), and M(III)) were identified in the solid solutions. The modifications had pseudohexagonal subcells that were modulated to form supercells. Coordinates of the reflections attributable to the supercells could be expressed by the following linear combinations of vectors of the reciprocal lattices: m₁(−2 a */5.4 + 2 b */5.4 − 7 c */5.4) for M(I), m₂(− a */5 + b */5 − c *) for M(II), and m₃(− a */6 + b */6 + 7 c */6) for M(III), m₁ and m₂=±1 and ±2, and m₃=±1, ±2, and ± 3. All the monoclinic modifications possessed structural modulations of a one-dimensional type. The modulation waves could be detected as wavy contrasts by high-resolution transmission electron microscopy.     

A comment on pure-strategy Nash equilibria in competitive diffusion games

In [N. Alon, M. Feldman, A.D. Procaccia, M. Tennenholtz, A note on competitive diffusion through social networks, Inform. Process. Lett. 110 (2010) 221–225], the authors introduced a game-theoretic model of diffusion process through a network. They showed a relation between the diameter of a given network and existence of pure Nash equilibria in the game. Theorem 1 of their paper says that a pure Nash equilibrium exists if the diameter is at most two. However, we have an example which does not admit a pure Nash equilibrium even if the diameter is two. Hence we correct the statement of Theorem 1 of their paper.     

Operation Assist by Vibration Suppression Control Using Impulse‐Shaped Signals for Power Assist Conveyance System

This paper presents an assist control method for a flexible parts conveyance task using a power assist conveyance system. The assist control method should be designed so as not only to suppress vibration but also to reduce the degradation of operating feel. For this purpose, multiple impulse‐shaped signals are used as feedforward signals in order to reduce the vibration of flexible parts during conveyance. In addition, the adjustment time is introduced to adjust the input timing of the impulse‐shaped signal and to suppress vibration. In order to improve the degradation of operating feel, the smaller amplitudes of the three impulse‐shaped signals are used and input repeatedly. The effectiveness of the proposed system was verified experimentally. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(2): 31–39, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22476     

Preparation and mesostructure control of highly ordered zirconia particles having crystalline walls

Mesostructured zirconia particles having monoclinic-type crystalline walls were prepared using a low-temperature crystallization technique. Crystalline zirconia particles with highly-ordered mesostructures were obtained through the sol–gel process of zirconium sulfate tetrahydrate at 333 K in the presence of molecular self-assemblies of cetyltrimethylammonium bromide (CTAB) or mixtures of CTAB and anionic molecules such as sodium dodecyl sulfate and sodium p-toluenesulfonate. Variations in the molar ratios of CTAB and the chemical species of anionic molecules led to the variations in the periods of highly-ordered zirconia having crystalline walls. Calcination of the mesostructured zirconia particles prepared using templates consisting solely of CTAB yielded crystalline mesoporous zirconia particles.     

Formation of Tetravalent Fe Ions in LaFeO3 Perovskite Through Mechanochemical Modification by Ball Milling

Mechanochemical modification of previously synthesized LaFeO₃ perovskite‐type oxide by a high‐energy ball milling was investigated to introduce Fe⁴⁺ ions or transform some Fe³⁺ into Fe⁴⁺ in LaFeO₃. X‐ray absorption fine structure studies revealed that the formation of Fe⁴⁺ ions into LaFeO₃ perovskite has been achieved at first time by ball milling at room temperature without any additives or replacement of La³⁺ ions by some divalent cations. The structural model of Fe⁴⁺ containing LaFeO₃ could be described as with a modified perovskite having equal amounts of La and Fe vacancies, which is supported by a good correlation between the results of Fe K‐edge XANES spectra and O₂‐TPD. The synthesis of Fe⁴⁺‐containing LaFeO₃ perovskite by ball milling was able to produce the O₂ adsorption capacity of nonsubstituted perovskite‐type oxide.     

PVC、EPR和CSM材料辐照后热氧化降解的反应动力学分析

采用气相色谱定量测量了聚氯乙烯(PVC)、乙丙橡胶(EPR)和氯磺化聚乙烯(CSM)等线缆绝缘材料经辐照后在不同温度下热老化过程中的O2消耗量.对实验数据进行了反应动力学分析,发现线缆绝缘材料的热氧化降解反应为一级反应.同时获得了不同温度下的反应常数,并与根据Arrhenius 方程计算的理论结果进行了比较.