The impact of industrial agglomeration on industrial pollutant emission: evidence from China under New Normal

The purpose of this study is to analyze the environmental pollution effects elicited by industrial agglomeration and to devise necessary changes before and after China going into the New Normal, a contemporary phase of less rapid but more sustainable economic development. An empirical model is constructed based on the Copeland–Taylor model, and empirical research is conducted using statistical panel data derived from 285 Chinese cities between 2003 and 2014. To study the relationship between industrial agglomeration and industrial pollutant emission both before and after the ‘New Normal,’ the sample data are divided into two time periods: 2003–2008 and 2009–2014. Estimated results are as follows. First, industrial agglomeration exacerbates industrial pollution levels overall although the negative environmental effect of industrial agglomeration is weakened following China’s entry into the New Normal phase of economy. Second, both the interaction term of industrial agglomeration and foreign direct investment (FDI) and the interaction term of industrial agglomeration and environmental regulation are negatively related to industrial agglomeration. These findings indicate that FDI and environmental regulation can indirectly reduce industrial pollutant emissions by way of industrial agglomeration.     

Greenhouse gases mitigation by CO<Subscript>2</Subscript> reforming of methane to hydrogen-rich syngas using praseodymium oxide supported cobalt catalyst

This study focuses on the potential of hydrogen-rich syngas production by CO₂ reforming of methane over Co/Pr₂O₃ catalyst. The Co/Pr₂O₃ catalyst was synthesized via wet-impregnation method and characterized for physicochemical properties by TGA, XRD, BET, H₂-TPR, FESEM, EDX, and FTIR. The CO₂ reforming of methane over the as-synthesized catalyst was studied in a tubular stainless steel fixed-bed reactor at feed ratio ranged 0.1–1.0, temperature ranged 923–1023 K, and gas hourly space velocity (GHSV) of 30,000 h^?1 under atmospheric pressure condition. The catalyst activity studies showed that the increase in the reaction temperature from 923 to 1023 K and feed ratio from 0.1 to 1.0 resulted in a corresponding increase in the reactant’s conversion and the product’s yields. At 1023 K and feed ratio of 1.0, the activity of the Co/Pr₂O₃ catalyst climaxed with CH₄ and CO₂ conversions of 41.49 and 42.36 %. Moreover, the catalyst activity at 1023 K and feed ratio of 1.0 resulted in the production of H₂ and CO yields of 40.7 and 40.90 %, respectively. The syngas produced was estimated to have H₂:CO ratio of 0.995, making it suitable as chemical building blocks for the production of oxygenated fuel and other value-added chemicals. The used Co/Pr₂O₃ catalyst which was characterized by TPO, XRD, and SEM-EDX show some evidence of carbon formation and deposition on its surface.     

Inverse analysis procedure to determine flow stress and friction data for finite element modeling of machining

This paper describes an inverse procedure to determine the constitutive constants and the friction conditions in the machining processes using Finite Elements (FE) simulations. In general, the FE modeling of machining processes is an effective tool to analyze the materials machinability under different cutting conditions. However, the use of reliable rheological and friction models represents the basis of a correct numerical investigation. The presented inverse procedure was based on the numerical results obtained using a commercial FE code and was developed considering a specific optimization problem, in which the objective functions that have to be minimized is the experimental/numerical error. This problem was performed by a routine developed in a commercial optimization software. In order to verify the goodness and the robustness of the methodology, it was applied on a Super Duplex Stainless Steel (SDSS) and on an Austenitic Stainless Steel (AUSS) orthogonal machining processes. This work, then, was focused on the identification of the Johnson-Cook (JC) coefficients (A,B,C, n and m) and on the calibration of a Coulomb friction model, in the specific cases of the SAF2507 SDSS and of an AISI 316 Based AUSS Alloy (AISI 316 ASBA). The identification phases were performed considering forces and temperatures experimental data, collected in two specific experimental tasks in which different orthogonal cutting tests were carried out under different cutting parameters conditions.     

Monolithically integrated CoP nanowire array: An on/off switch for effective on-demand hydrogen generation via hydrolysis of NaBH<Subscript>4</Subscript> and NH<Subscript>3</Subscript>BH<Subscript>3</Subscript>

The issues of hydrogen generation and storage have hindered the widespread use and commercialization of hydrogen fuel cell vehicles.It is thus highly attractive,but the design and development of highly active non-noble-metal catalysts for on-demand hydrogen release from alkaline NaBH4 solution under mild conditions remains a key challenge.Herein,we describe the use of CoP nanowire array integrated on a Ti mesh (CoP NA/Ti) as a three-dimensional (3D) monolithic catalyst for efficient hydrolytic dehydrogenation of NaBH4 in basic solutions.The CoP NA/Ti works as an on/off switch for on-demand hydrogen generation at a rate of 6,500 mL/(min.g) and a low activation energy of 41 kJ/mol.It is highly robust for repeated usage after recycling,without sacrificing catalytic performance.Remarkably,this catalyst also performs efficiently for the hydrolysis of NH3BH3.     

Shape design of cerium oxide nanoparticles for enhancement of enzyme mimetic activity in therapeutic applications

Cerium oxide nanoparticles (CONPs), widely used in catalytic applications owing to their robust redox reaction, are now being considered in therapeutic applications based on their enzyme mimetic properties such as catalase and super oxide dismutase (SOD) mimetic activities. In therapeutic applications, the emerging demand for CONPs with low cytotoxicity, high cost efficiency, and high enzyme mimetic capability necessitates the exploration of alternative synthesis and effective material design. This study presents a room temperature aqueous synthesis for low-cost production of shape-selective CONPs without potentially harmful organic substances, and additionally, investigates cell viability and catalase and SOD mimetic activities. This synthesis, at room temperature, produced CONPs with particular planes: {111}/{100} nanopolyhedra, {100} nano/submicron cubes, and {111}/{100} nanorods that grew in [110] longitudinal direction. Enzymatic activity assays indicated that nanopolyhedra with a high concentration of Ce⁴⁺ ions promoted catalase mimetic activity, while nanocubes and nanorods with high Ce³⁺ ion concentrations enhanced SOD mimetic activity. This is the first study indicating that shape and facet configuration design of CONPs, coupled with the retention of dominant, specific Ce valence states, potentiates enzyme mimetic activities. These findings may be utilized for CONP design aimed at enhancing enzyme mimetic activities in therapeutic applications.

Open image in new window

     

Interest of molecular functionalization for electrochemical storage

Despite great interests in electrochemical energy storage systems for numerous applications, considerable challenges remain to be overcome. Among the various approaches to improving the stability, safety, performance, and cost of these systems, molecular functionalization has recently been proved an attractive method that allows the tuning of material surface reactivity while retaining the properties of the bulk material. For this purpose, the reduction of aryldiazonium salt, which is a versatile method, is considered suitable; it forms robust covalent bonds with the material surface, however, with the formation of multilayer structures and sp³ defects (for carbon substrate) that can be detrimental to the electronic conductivity. Alternatively, non-covalent molecular functionalization based on π–π interactions using aromatic ring units has been proposed. In this review, the various advances in molecular functionalization concerning the current limitations in lithium-ion batteries and electrochemical capacitors are discussed. According to the targeted applications and required properties, both covalent and non-covalent functionalization methods have proved to be very efficient and versatile. Fundamental aspects to achieve a better understanding of the functionalization reactions as well as molecular layer properties and their effects on the electrochemical performance are also discussed. Finally, perspectives are proposed for future implementation of molecular functionalization in the field of electrochemical storage.

Open image in new window

     

A series of nanoparticles with phase-separated structures by 1,1-diphenylethene controlled one-step soap-free emulsion copolymerization and their application in drug release

A facile one-step approach to synthesize various phase-separated porous, raspberry-like, flower-like, core–shell and anomalous nanoparticles and nanocapsules via 1,1-diphenylethene (DPE) controlled soap-free emulsion copolymerization of styrene (S) with glycidyl methacrylate (GMA), or acrylic acid (AA) is reported. By regulating the mass ratio of S/GMA, transparent polymer solution, porous and anomalous P(S-GMA) particles could be produced. The P(S-GMA) particles turn from flower-like to raspberry-like and then to anomalous structures with smooth surface as the increase of divinylbenzene (DVB) crosslinker. Transparent polymer solution, nanocapsules and core–shell P(S-AA) particles could be obtained by altering the mole ratio of S/AA; anomalous and raspberry-like P(S-AA) particles are produced by adding DVB. The unpolymerized S resulted from the low monomer conversion in the presence of DPE aggregates to form nano-sized droplets, and migrates towards the external surfaces of the GMA-enriched P(S-GMA) particles and the internal bulk of the AA-enriched P(S-AA) particles. The nano-sized droplets function as in situ porogen, porous P(S-GMA) particles and P(S-AA) nanocapsules are produced when the porogen is removed. This novel, facile, one-step method with excellent controllability and reproducibility will inspire new strategies for creating hierarchical phase-separated polymeric particles with various structures by simply altering the species and ratio of comonomers. The drug loading and release experiments on the porous particles and nanocapsules demonstrate that the release of doxorubicin hydrochloride is very slow in weakly basic environment and quick in weakly acidic environment, which enables the porous particles and nanocapsules with promising potential in drug delivery applications.

Open image in new window

     

Determination of the acidic properties of carboxylated carbocatalysts in an acid-catalyzed ring-opening reaction using kinetic profiling

The acid-catalyzed ring-opening reaction of styrene oxide was used as a probe reaction for evaluating the acidic properties of carboxylated carbocatalysts. Significant discrepancies in the initial reaction rates were normalized using the total number of carboxyl groups, and demonstrated that the average catalytic activities of the carboxyl moieties on the carbocatalysts differed. Comparisons between the apparent activation energy E _a and the pre-exponential factor A, derived from Arrhenius analysis, demonstrated that A varied more significantly, and therefore had a more significant effect on the reaction rates than E _a. The variation in the calculated pKa values of the carboxyl groups was attributed to the electronic effects of the nitro groups. This hypothesis was supported by the temperature programmed desorption profiles of nitrogen monoxide ions.

Open image in new window

     

Wissen auf losen Blättern im Kontext starrer Theorien

At the end of the nineteenth century, after twelve years of intensive research, the ophthalmologist Theodor Leber (1840–1917) established the chemotaxis of leukocytes as part of inflammation research. Although at the time his theory was smoothly enlisted into immunological research, up until now his name has been connected to chemotaxis only in the English-language literature. Leber was able to use his experimental system to develop a theory of the chemical attraction of the leukocytes during inflammation processes by the beginning of the 1880s, but his unconventional methodology—introducing chemically neutral contaminants in order to trigger inflammation in the eyes of rabbits—contradicted the basic bacteriological Denkstil (style of thought) of inflammation research at the time. Leber held fast to his research practice, which consisted of closely interlocking experimental and theoretical work. Only when an opening appeared in the bacteriological Denkstil was Leber able to transform his experimental observations, written on loose sheets of paper, into convincing evidence for his theory of inflammation. This micro-historical reconstruction of Leber’s experimental and written work, based on his original lab protocols, opens up the research practice of a scientist who was not recognized by the established microbiological inflammation research of the time. Moreover, persistent factors in the generation of knowledge are revealed by connecting this micro-historical reconstruction with a macro-history analysis. Indeed Leber developed his specific paper technology in order to mobilise and stabilise the scientific findings gained through experiment because of the persistence of the bacteriological Denkstil.     

Mechanical and Thermophysical Properties of Cerium Monopnictides

The ultrasonic attenuation due to phonon–phonon interaction, thermoelastic relaxation and dislocation damping mechanisms has been investigated in cerium monopnictides CeX (X: N, P, As, Sb and Bi) for longitudinal and shear waves along \({\langle }100{\rangle }\), \({\langle }110{\rangle }\) and \({\langle }111{\rangle }\) directions. The second- and third-order elastic constants of CeX have also been computed in the temperature range 0 K to 500 K using Coulomb and Born–Mayer potential upto second nearest neighbours. The computed values of these elastic constants have been applied to find out Young’s moduli, bulk moduli, Breazeale’s non-linearity parameters, Zener anisotropy, ultrasonic velocity, ultrasonic Grüneisen parameter, thermal relaxation time, acoustic coupling constants and ultrasonic attenuation. The fracture/toughness ratio is less than 1.75, which shows that the chosen materials are brittle in nature as found for other monopnictides. The drag coefficient acting on the motion of screw and edge dislocations due to shear and compressional phonon viscosities of the lattice have also been evaluated for both the longitudinal and shear waves. The thermoelastic loss and dislocation damping loss are negligible in comparison to loss due to Akhieser damping (phonon–phonon interaction). The obtained results for CeX are in qualitative agreement with other semi-metallic monopnictides.