High-precision continuous-flow measurement of delta13C and deltaD of atmospheric CH4

We describe our development of a CH4 preconcentration system for use with continuous-flow gas chromatograph combustion isotope ratio mass spectrometry (GC/C/IRMS). Precision of measurement of delta13C-CH4 is 0.05/1000 (1sigma) on multiple 60-mL aliquots of the same ambient air sample. The same front-end on-line CH4 preconcentration system allows us to measure deltaD of CH4 by gas chromatography IRMS when the combustion furnace is replaced with a pyrolysis oven (GC/P/IRMS). Precision of measurement for deltaD-CH4 is 1.5/1000 (1sigma) using 120 mL of ambient air based on multiple aliquots of the same air sample. These are the first reported measurements of atmospheric CH4 using GC/P/IRMS methodology. Each isotope analysis can be made much more rapidly (30-40 min) than they could using off-line combustion of an air sample (1-6 h) followed by conventional dual-inlet IRMS measurements (12-20 min), while requiring much less total volume and retaining a comparable level of precision and accuracy. To illustrate the capabilities of our preconcentration GC/C/IRMS system, we compare the results of measurement of 24 background air samples made using both GC/C/IRMS and conventional vacuum line/dual-inlet IRMS methodology. The air samples were collected on a shipboard air sampling transect made across the Pacific Ocean in July 2000 and are part of an ongoing atmospheric CH4 research program. The average difference between the two methods of IRMS analyses on these 24 samples is 0.01 +/- 0.03/1000 (95% confidence interval) for delta3C-CH4. These are the first measurements to be reported of air samples directly intercompared for delta13C-CH4 using both GC/C/IRMS and dual-inlet IRMS measurement methodology. Measurement of deltaD-CH4 of these air samples is also presented as an illustration of the ability of this system to resolve small isotopic differences in remote air. High-precision measurement of delta13C and deltaD of atmospheric CH4 made using our coupled preconcentration GC/IRMS system will greatly improve our ability to utilize isotopic data in understanding spatial and temporal changes in atmospheric CH4 and the biogeochemistry of its sources and sinks.     

Tensile creep behavior of 3-D woven Si-Ti-C-O fiber/SiC-based matrix composite with glass sealant

The present work investigates the tensile creep behavior (deformation and rupture) at 1100–1300°C in air of a 3-D woven Si-Ti-C-O (Tyranno) fiber/SiC-based matrix composite with and without glass sealant. The composite contained Si-Ti-C-O fibers with an additional surface modification in order to improve interface properties. Although a significant decrease in tensile strength was observed in the unsealed composite beyond 1000°C in air (and attributed to oxidation of the fiber/matrix interface), the composite with glass sealant possessed excellent mechanical properties for short-term (<1 hr.) exposure in air. In this study, tensile creep testing was conducted at 1100–1300°C in air and the effect of glass sealant on medium- and long-term strength was investigated. In addition, chemical stability of the glass sealant was evaluated by X-ray diffraction analysis (XRD) and energy dispersive X-ray spectrometer (EDS). The creep rupture behavior of the composite with glass sealant under long-term exposure is suggested to depend on several factors including decomposition, evaporation, and crystallization of the glass sealant material, in addition to the applied stress.     

On PH quintic spirals joining two circles with one circle inside the other

The paper derives a spiral condition, for a single Pythagorean hodograph quintic transition curve of G² contact, between two circles with one circle inside the other. A spiral is free of local curvature extrema, making spiral designs an interesting mathematical problem with importance for both physical and aesthetic applications. In the construction of highways or railway routes in particular, it is often desirable to have a transition curve from circle to circle. Here, we treat an open problem on planar quintic spiral segments, called transition curve elements, examine techniques for curve design using the new results, and derive lower and upper bounds for the distance between the two circles. The proposed method is applicable for non-tangent and non-concentric circles.     

A Passive UHF RF Identification CMOS Tag IC Using Ferroelectric RAM in 0.35-μm Technology

A passive UHF RF identification (RFID) tag IC with embedded 2-KB ferroelectric RAM (FeRAM) for rewritable applications enables a 2.9 times faster read-and-write transaction time over EEPROM-based tag ICs. The resulting FeRAM-based tag has a nominally identical communication range for both read and write operations, which is indispensable for data write applications. The evaluated tag communication range with a folded dipole antenna is from 0 m to 4.3 m, at the 953-MHz carrier frequency with 4-W transmitting Effective Isotropic Radiated Power (EIRP) from a reader/writer. The developed tag IC features two circuit blocks to maximize the communication range in 0.35-mum CMOS/FeRAM technology. First is a CMOS-only full-wave rectifier, which can improve the measured efficiency by up to 36.6% by reducing the input parasitic capacitances and optimization of multiplier structure. This efficiency is more than twice that of previously-published results. Second is a low-voltage current-mode ASK demodulator to accommodate a low-breakdown voltage of FeRAM, which converts the ASK power modulation into a linearly modulated current over an incoming power range of 27 dB, corresponding to the entire communication range. The developed demodulator can thus resolve the primary design tradeoff issue between device protection and detection sensitivity in the conventional voltage-mode demodulator     

SORTAL ANAPHORA RESOLUTION IN MEDLINE ABSTRACTS

This paper reports our investigation of machine learning methods applied to anaphora resolution for biology texts, particularly paper abstracts. Our primary concern is the investigation of features and their combinations for effective anaphora resolution. In this paper, we focus on the resolution of demonstrative phrases and definite determiner phrases, the two most prevalent forms of anaphoric expressions that we find in biology research articles. Different resolution models are developed for demonstrative and definite determiner phrases. Our work shows that models may be optimized differently for each of the phrase types. Also, because a significant number of definite determiner phrases are not anaphoric, we induce a model to detect anaphoricity, i.e., a model that classifies phrases as either anaphoric or nonanaphoric. We propose several novel features that we call highlighting features , and consider their utility particularly for processing paper abstracts. The system using the highlighting features achieved accuracies of 78% and 71% for demonstrative phrases and definite determiner phrases, respectively. The use of the highlighting features reduced the error rate by about 10%.     

Growth monitoring and classification of rice fields using multitemporal RADARSAT-2 full-polarimetric data

Spaceborne synthetic aperture radar (SAR) can be used for agricultural monitoring. In this study, three single-polarimetric and four full-polarimetric observation data sets were analysed. A rice paddy field in northern Japan was used as the study site; the data for this site were obtained using RADARSAT-2, which carries a full-polarimetric C-band SAR. Soybean and grass fields were also present within the paddy fields. The temporal change in the backscattering coefficient of the rice paddy fields for the single-polarization data agreed with the temporal change obtained for a rice growth model based on radiative transfer theory. A three-component decomposition approach was applied to the full-polarimetric data. With each rice growth stage, the volume scattering component ratio increased, whereas the surface scattering component ratio generally decreased. The soybean and grass fields showed a smaller double-bounce scattering component than the rice fields for all the acquired data. The results of this study show that multitemporal observation by full-polarimetric SAR has great potential to be utilized for estimating rice-planted areas and monitoring rice growth.     

Incorporation of Dust Particles into a Growing Film During Silicon Dioxide Deposition from a TEOS/O2 Plasma

The effects of gas flow rate on particle formation and film deposition during the preparation of silica thin film using a TEOS/O₂ plasma were investigated. Particle formation and growth are suppressed with increasing gas flow rates. The film deposition rate increases with increasing gas flow rate, reaches a maximum value, and eventually decreases again. However, the uniformity of the film tends to degrade at high gas flow rates. At a high gas flow rate, some particles trapped in the sheath near the grounded electrode pass through the sheath to reach the substrate and are then embedded in the growing film. A self-consistent sheath model combined with particle force balance based on charge fluctuation was developed to explain these experimental findings qualitatively. The model reveals that charge fluctuation is a key factor for the particle to overcome the potential barrier of the negatively charged particles to pass through the sheath, eventually reaching the substrate. The model further shows that the probability of a particle being deposited on the substrate is higher for increased gas flow rates, which correctly predicts the experimentally observed trend.     

Improving sinterability of ceramics using hybrid microwave heating

Microwave processing, as a new method for sintering ceramics, has key advantages such as increased heating rate, uniform heating and reduced cost compared to conventional methods. It is generally accepted that microwave sintering can improve the macroscopic mechanical performances of ceramics, however, the performances of microwave-sintered ceramics on the microscopic scale are rarely investigated. In the present study, the ceramics are sintered by hybrid microwave sintering (HMS), which combines the characteristics of microwave heating and conventional heating. To evaluate the homogeneous performance of the sintered ceramics, the behaviors of thermal residual stress distribution in the microwave-sintered and conventionally sintered ceramics were investigated by X-ray diffraction technique. The thermal residual stress investigation shows microwaves can sinter ceramics in entire volume while offering improved mechanical properties. Subsequently, the distribution behaviors of pore ratio and hardness in the ceramics were investigated, respectively. The experiment results confirm that the sinterability of ceramics is homogenously improved by hybrid microwave sintering.     

Observations of bound Tween80 surfactant molecules on single-walled carbon nanotubes in an aqueous solution

The slow diffusion of Tween80 surfactant molecules in a single-walled carbon nanotube (SWCNT) aqueous dispersion was directly observed using the pulsed field gradient nuclear magnetic resonance method. The slow diffusion of Tween80 molecules was attributed to the strongly adsorbed molecules on the SWCNTs in the aqueous dispersion. The amount of bound Tween80 molecules was estimated to be approximately 12% of the total amount of Tween80 molecules, contributing to the stability of the SWCNT aqueous dispersion. Using dynamic light scattering and total organic carbon measurements, this SWCNT/Tween80 aqueous dispersion was found to be very stable for at least 3 weeks. The observed zeta potentials of this SWCNT dispersion are between −10 and 0 mV, indicating that the stability of the SWCNTs in the Tween80 solution was maintained by steric interactions between the small amount of adsorbed Tween80 molecules on the SWCNTs, while the effect of electrostatic interactions between adsorbed Tween80 was minimal. This proposed method to investigate the amount of bound Tween80 molecules on SWCNTs has potential benefits in the field of the production of functional materials and nano-toxicity assessments.