Prediction of foam growth and its nucleation in free and limited expansion

The influence volume approach (IVA) is often utilized for modeling the mass transfer process dictating bubble growth dynamics in physical foaming. However, the assumed concentration profile in the IVA method is only valid when the changes in dissolved gas concentration are small (less than 5%). In addition, the validity of the IVA method is difficult to justify in chemical foaming applications because of the difficulties involved in defining the dissolved gas concentration profile.In the present work, we define two distinct stages of bubble growth for physical foaming. These two stages are termed as free and limited expansion and are controlled by the bubble nucleation rate. Bubble nucleation is assumed to occur only in the free expansion stage. In this stage, the bubble pressure drops substantially from an initially high pressure in the supersaturated state while the dissolved gas concentration changes very little. The second stage of our two-stage mass transfer model is termed the limited expansion stage and accounts for bubble growth in the late stages of foam evolution, when the pressure changes become small. However, in the limited stage of bubble growth the dissolved gas concentration drops significantly, as the available dissolved gas is depleted. To summarize our two-stage mass transfer model of foam expansion, the pressure difference between the bubble phase and the liquid phase is the primary mechanism for driving mass transfer in the early (free) stages of foam growth and the concentration difference is the driver for bubble growth in the late (limited) stages of growth. The first stage can be regarded as the nucleation stage and it is relatively short; while the second stage can be regarded as the bubble growth stage and is much longer. Most of the bubble volume expansion takes place in the second stage.The concentration gradient at the bubble edge, which is often ignored in other models, is analyzed in detail in this paper. The details of our novel mass transfer model are also presented.     

AOI技术在激光微孔产品检查中的应用

在过去几年里,小型PCB诸如硅芯片级以及便携式移动电话的生产者和设计者们已经发现:如果要保持自己的竞争力并具备生产高密度封装板能力,就必须采用微孔技术。微孔技术的出现要求针对微孔缺陷的有效检测手段对工艺进行过程控制。本文对激光微孔的自动光学检测进行了详细介绍。     

Miniaturized Hexagonal Stepped-Impedance Resonators and Their Applications to Filters

Miniaturized hexagonal stepped-impedance resonators and their applications to bandpass filters are presented. Based on the odd- and even-mode equivalent circuits, the resonance characteristics of these resonators are investigated. A series of circuit configurations, including the third-order Chebyshev, trisection, and fifth-order cascaded trisection filters, are constructed by the proposed resonators. These filters are very compact and have good stopband responses. Measured results validate the analysis and theoretical prediction with good agreement.     

Grafting of maleic anhydride onto polyethylene through a green chemistry approach

The grafting of a polymer can lead to the improvement and modification of the polymer and thus expand its applications. Grafting methods include solution grafting in organic solvents, melt grafting at high temperatures, and light grafting with radioactive sources. These methods have their advantages and disadvantages. The disadvantages include waste treatment, consumption of energy, and so on. In this study, a hydrothermal process which is called the green approach, was developed to prepare graft copolymers. The effect of various factors on the grafting degree was investigated in detail. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Epoxidation of high trans‐1,4‐polyisoprene and its properties

A new organic‐solvent‐free water‐phase suspension method was used to synthesize partially epoxidized high trans‐1,4‐polyisoprene (TPI) to improve its properties, including oil resistance and wet‐skid resistance. The epoxidation was conducted in an aqueous peracetic acid solution and on the TPI granules prepared by a bulk precipitation method with supported titanium catalyst. The effects of the synthesis conditions, including reaction temperature, reaction time, and pH value, on the epoxy content were investigated. Epoxidized trans‐1,4‐polyisoprene (ETPI) with epoxy contents between 10 and 80% were obtained within 4 h. Both the amorphous and crystalline regions of TPI were epoxidized. The crystallization properties decreased with increasing epoxy content. ETPIs possessed lower mechanical properties than TPI but could be enhanced by vulcanization. The oil resistance and wet‐skid resistance were significantly improved after epoxidation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

全面实施上海城市总体规划加快建设资源节约型城市

上海是一个经济快速发展的城市,同时也是一个资源相对匮乏的地区.文章从上海城市的总体规划出发,全面阐述坚持科学发展观,以资源节约型城市规划的理念,充分发挥城市规划的先导和调控作用,从全局和战略高度,实现能源、资源的合理节约利用,促进人与自然的和谐发展.     

A Study of the Compatibility Between Asphalt and SBS

In this article, the compatibilities between different components of a base asphalt and styrene butadiene styrene (SBS) have been analyzed from microscopic structures. Specifically, the asphalt was separated into three components: saturates, aromatics, and resins, by Solvent Recycled Absorption Chromatography Separation Technology (SRACST). The compatibilities between these different components and the polymer were compared with the help of Fluorescence Microscope (FM) with which the existing state of the polymer SBS in these different components could be examined obviously. The modified effects indicated that aromatics could cause SBS swollen and, resins dissolved SBS better than saturates, though both the two components could partially dissolve SBS and the two mixtures presented two immiscible phase systems. In order to further investigate the compatibility between aromatics and SBS, from macroscopic properties, an additive rich in aromatics was added to the SBS/asphalt mixture, and the result was satisfactory.     

招远金矿集中区金矿富集规律及找矿标志

招远金矿集中区是我国最大的金矿集中区，区内金矿床在时间和空间上的分布规律十分明显。该区矿化类型主要有石英脉型、蚀变岩型及二者之间的过渡类型，其在空间上的分布规律为综合信息找矿及矿床定位预测提供地质信息，并可作为进一步的找矿标志。     

用αβ谱仪测量人工αβ放射性气溶胶体积活度的试验研究

本文介绍了用αβ谱仪系统同时测量αβ谱、实现Ｒｎ／Ｔｈ子体补偿、确定超铀α核素气溶胶体积活度及人工放射性气溶胶总β体积活度的技术途径。利用ＲａＡ、ＲａＣ′ａ峰的二段时间计数可确定空气中ＲａＡ、ＲａＢ、ＲａＣ的气溶胶体积活度，相应的，也能给出ＲａＢ、ＲａＣ对总β计数的贡献。根据一般环境条件下的平衡比，用ＴｈＣ′的。计数修正Ｔｈ子体对αβ测量的影响。￣［２３９］ｐｕ或／和￣［２４１］Ａｍ人工核素的α计数，可通过两段时间分别扣除ＲａＡ、ＲａＣ′拖尾的方法确定；β计数分别扣除Ｒｎ／Ｔｈ子体β贡献即可确定。在本文规定的测量条件下，对室内天然Ｒｎ子体水平在１５Ｂｑ／ｍ￣３以下，超铀α核素气溶胶体积活度的测量下限可达到０．１Ｂｑ／ｍ￣３；即使在７５Ｂｑ／ｍ￣３环境下，人工核素总β的测量下限也可达ｌＢｑ／ｍ￣３以下。