Quantitative real-time imaging of myocardium based on ultrasonic integrated backscatter

The integrated backscatter calculation over the full, two-dimensional echocardiographic sector is implemented to produce images from closed-chest dogs. This new real-time integrated backscatter measurement system allows a continuous determination of integrated backscatter from all myocardial regions in the ultrasonic view. By replacing the conventional video processor in a commercial two-dimensional echocardiographic imager with this new real-time backscatter measurement system, it is possible to produce real-time two-dimensional images based on integrated backscatter.     

Diffusion soldering for stable high-temperature thin-film bonds

Diffusion soldering is a special bonding technique to produce joints at a moderate temperature that are subsequently stable at higher temperatures. The search for material systems extending the upper-temperature limit of stability requires information from the pertinent phase diagrams and the reaction kinetics. Combining experimental studies on phase equilibration in powder samples with bulk and thin-film diffusion couples is a useful approach for a systematic search. Promising candidates for dsoldering are Pt-In or Pd-In, and molybdenum is also an effective diffusion barrier against the attack of liquid tin.     

Mass-Balance Model of Pulmonary Oxygen Transport

A dynamic lumped-parameter model for pulmonary gas transport has been developed to characterize the lung and predict the effect of various parameter changes. The gas side of the lung is modeled as a series and parallel arrangement of five perfectly mixed, variable-volume compartments that correspond roughly to airway and alveolar regions. The blood side of the lung is modeled as a series of perfectly mixed, constant-volume compartments that represent the pulmonary capillary bed. From nonsteady mass balances, equations are derived which yield the time course of concentration for each compartment. Model simulations indicate that the oxygen-hemoglobin reaction does not reach equilibrium in the pulmonary capillaries, an assumption commonly made in analyses of pulmonary oxygen transport. Simulations also show the extent to which breathing amplitude and rate can affect the oxygen level in the blood leaving the lung. A comparison of simulations for a normal state and chronic obstructive lung disease (COLD) with identical input conditions demonstrates that the oxygen level in the blood leaving the lung is much lower in COLD. Also, the simulations are compared with experimental findings.     

Compound types and properties of Utah and Athabasca tar sand bitumens

Properties and compound types were examined in detail for tar-sand bitumens representative of four major deposits in Utah and Alberta. Methods for bitumen extraction, separation, and compound type (functional group) analysis are presented. Results of the analyses are compared with each other and with results in the literature for tar-sand bitumens and petroleum. Comparison of the results of Utah bitumens with the Athabasca bitumen provides a basis for evaluation of the Utah bitumens because considerable information about the processing characteristics of the Athabasca bitumen has been reported. Simulated distillation and Chromatographic separation data indicate that, in general, the tarsand bitumens most closely resemble Wilmington petroleum with respect to hydrocarbon/non-hydrocarbon distribution, especially in the non-distilling portion (the distillable portions, mainly hydrocarbons, are similar for all samples). Tar-sand bitumens were also shown to differ significantly from one another, principally in the amounts and kinds of heteroatomic compound types present. This information is important because of the effects that composition has on recovery and refining processes. Analyses of the chemical functionalities also provide a basis for developing correlations between bitumen composition and the recovery and processing characteristics of the bitumen.     

Some aspects of the role of coal thermoplasticity and coke structure in coal gasification. 2. The effects of pressure and heating rate on dilatometric parameters and optical anisotropy development

An examination of the influence of pressure and heating rate on the thermoplastic properties of a weakly coking coal and of coal with various pitch-like additives was carried out using a high pressure dilatometer. Pressure up to 4 MPa markedly increased the swelling properties and increased the plastic range by decreasing the softening temperature, but the effects of pressure were strongly influenced by rate of heating with high heating rates enhancing the effects. Additions of tar or pitch also enhanced swelling at low pressure. The solid carbonization residues from the dilatometer were examined by polarized light microscopy to determine the content and composition of optically anisotropic species. The anisotropic content was increased by increases in pressure and heating rate and pitch additives enhanced the anisotropic content, especially at low pressure, without affecting the composition of the anisotropy. No direct correlations exist between the dilatometric parameters and the optical anisotropy but their dependence on the conditions emphasizes that when considering high pressure gasification of coal, it is necessary to obtain data under appropriate conditions.     

Mechanical properties of certain oriented crystalline polymers

The yield stress is a simple function of the deformation ratio in the direction of testing for specimens oriented by uniaxial or biaxial stretching or rolling. Unless the yield stress increases more rapidly than in proportion to the deformation ratio, there will be instability during tensile creep under high loads. The relative merit of various polymers differs for creep and stress relaxation. Fatigue and bend recovery are also related to the molecular structure.     

Fatty acid selectivity of lipases: Erucic acid from rapeseed oil

The fatty acid selectivity of several commercial lipases was evaluated in the hydrolysis of high-erucic acid rapeseed oil (HEARO). The lipase ofPseudomonas cepacia catalyzed virtually complete hydrolysis of the oil (94–97%), while that ofGeotrichum candidum discriminated strongly against erucic acid, especially in esterification. A two-step process is suggested for obtaining a highly enriched erucic acid in which theG. candidum lipase is employed to selectively esterify the fatty acid residues of unsaturated C-18, and shorter chain acids, from a mixture of HEARO fatty acids obtained from total hydrolysis of the oil withP. cepacia lipase.     

IR study of the interaction of hydroxyl groups of silica gel with Cr species of Phillips' type catalysts

Spectroscopic evidence for the interaction of hydroxyl groups and chromium ions was obtained using a catalyst prepared from chromyl chloride. A new OH peak, observed at 3705 cm^–1 after pumping away CO gas, is attributed to the direct interaction of OH with the low-valent chromium. This peak shifts to 3590 cm^–1 on contact with O₂ at room temperature and it is assigned to a hydroxyl interacting with the oxidized chromium. New assignments are also proposed for IR bands of CO presorbed on the catalyst. The peak due to CO at 2188 cm^–1 decreases as the OH intensity at 3705 cm^–1 increases, suggesting that the former peak arises from adsorption on Cr(II) species to which two oxygen atoms are attached.     

Incorporation of surface-modified UHMWPE powders and fibers in tough polyurethane composites

Ultrahigh molecular weight polyethylene (UHMWPE) powder (60 micron diameter) and chopped fiber (6.5 mm length) were surface treated with a blend of reactive gases (fluorine and oxygen.) These powders and fibers were then compounded into a thermoset polyurethane matrix. Surface-treated and control reinforcements are compared at a 10 vol.% loading level. Tensile testing indicates improved stress transfer with surface treatment. Stress transfer is also improved with fibers versus powders. Fracture toughness is characterized by measuring the essential work of fracture, w_e. Surface-treated fiber composites exhibit work of fracture values almost three times the unfilled polyurethane values. Abrasion resistance was also measured. Surface treatment was found to significantly lower wear rates of powder composites. Fiber composites had lower wear rates than powder composites, although surface treatment had little effect. An approximate inverse relationship was found between wear rate and essential work of fracture.     

Evaluation of chromic oxide,glycerol triether,and β-sitosterol as fecal flow markers in two species of nonhuman primates

Recovery of β-sitosterol, glycerol triether (1-hexadecyl-2,3,-didodecyl glycerol triether), and chromic oxide was studied in African green monkeys and stumptail macaques consuming diets containing 0.75 mg/Cal cholesterol and 38% of calories as safflower oil or butter. Following oral administration of these compounds, feces were collected daily for 9 days. For all animals, excretion of β-sitosterol and glycerol triether paralleled one another almost exactly. Except for two animlas, this was also true for chromic acid. Essentially 100% of the administered β-sitosterol and 90–95% of the glycerol triether were recovered; excretion of these markers virtually was complete by day 3. Ninety-two percent of the β-sitosterol was isolated in the nonsaponifiable lipid extract of the feces with less than 6% in the remaining aqueous phase. A maximum of 3.1% of the β-sitosterol and 1.8% of the glycerol triether were found in the blood. For stumptail macaques, the major excretory form of β-sitosterol was the 5β-derivative. African green monkeys were more variable; one animal excreted the bulk of the β-sitosterol unchanged while others excreted greater than 80% as the ring-saturated 5β-derivative. Animals consuming the safflower oil containing diet consistently excreted a greater percentage of the β-sitosterol unchanged, compared with those animals eating the butter containing diet. There was no evidence for steroid ring degradation in any of the animals used in this study.