Neural Computation of the MoM Matrix Elements for Planar Configurations

In this paper a new artificial neural network (ANN) based model for the calculation of the method of moments (MoM) matrix elements is presented. Training sets that characterize the matrix elements are first constructed. These sets are then utilized to effectively train two radial basis function (RBF) neural networks to accurately estimate all the elements of the MoM matrix for any mesh used. The potential of the proposed approach is demonstrated in the case of a narrow microstrip line. The current distribution on the microstrip line produced by the trained RBF networks agrees very well with the exact distribution. In addition, the proposed ANN model is much faster than the conventional MoM procedure.     

Use of weibull statistics to quantify property variability in TiAl alloys

Tensile experiments have been performed on specimens of four different investment-cast TiAl-based alloys with variations in casting conditions. The average ductilities obtained in these experiments vary between approximately 0.8 to 2.0 pct plastic strain to failure in tension. By using the three-parameter form of the Weibull relation, with the 0.2 pct offset yield strength as the minimum failure strength, the resulting variability in the data can be quantified and is found to be similar for those alloys with similar microstructural scale (grain size). Large variations in lamellar volume fraction, segregation, and phase distribution have a minor influence on property variability, compared to changes in the scale of the grain structure caused by either variations in cooling rate during casting or the addition of grain refiners.     

Simulation of the submerged energy nozzle-mold water model system using laser-optical and computational fluid dynamics methods

The present work describes quantitative digital particle image velocimetry measurements of a full-scale water model of a thin slab mold. Different casting speeds and two submerged entry nozzles with one and two outlet ports have been investigated. The flow pattern of the single-port nozzle shows a counterclockwise-rotating double vortex that is nearly steady-state but leads to high stationary surface waves. The flow jets out of the two-port nozzle oscillate and produce a transient flow pattern with low wave amplitudes. The amplitudes for the one-port nozzle show a linear variation with the volumetric flow rate. The experimental results lead to a good interpretation of the flow phenomena and are used to validate steady-state numerical simulations with the commercial program, CFX, on the basis of the Reynolds equations. To describe anisotropic turbulence effects, the Reynolds stress model (RSM) is used for the flat single-port nozzle and the standard k-ɛ model for the mold flow. The calculated mean velocities and wave amplitudes, predicted from pressure distribution at the water surface, are generally in the consensus of the experimental data. An erratum to this article is available at .     

Distribution of properties from sampling inhomogeneous materials by line transects

A theory related to the statistics of the structure and properties of inhomogeneous materials has been proposed, dealing with the distribution of properties from sampling of inhomogeneous structures by line transects. It is demonstrated that the empirical cumulative distribution functions of the intercepts from the microstructural constituents and their variances are important fingerprints of the inhomogeneous structures.Simulated sampling of the images of the microstructure by line transects has been proposed as a powerful method for characterization the distribution of properties of inhomogeneous structures. One of the advantages of the method based on the expected values of the order statistics of the intercepts is that the probability bounds of the property are determined without prior knowledge of the functional relationship between the property and the intercepts from the structural constituents.The concept intercept variance has an important application in determining the minimum transect length that stabilizes the variation of the intercept at a low value. Additionally, the concept ‘intercept variance’ can be used for topological optimization of the microstructure regarding the risk of intercepting a large amount of the weaker constituent. Equations regarding the variance of the intercepted fraction characterizing transect lengths with a specified distribution have also been derived.     

Efficient mixed Timoshenko–Mindlin shell elements

The precise representation of rigid body motions in the displacement patterns of curved Timoshenko–Mindlin (TM) shell elements is considered. This consideration requires the development of the strain–displacement relationships of the TM shell theory with regard to their consistency with the rigid body motions. For this purpose a refined TM theory of multilayered anisotropic shells is elaborated. The effects of transverse shear deformation and bending‐extension coupling are included. The fundamental unknowns consist of five displacements and eight strains of the face surfaces of the shell, and eight stress resultants. On the basis of this theory the simple and efficient mixed models are developed. The elemental arrays are derived using the Hu–Washizu mixed variational principle. Numerical results are presented to demonstrate the high accuracy and effectiveness of the developed 4‐node shell elements and to compare their performance with other finite elements reported in the literature. Copyright © 2002 John Wiley & Sons, Ltd.     

医用纺织品应用概述

1　前言自有历史记载以来就有用纺织品作人体可移植品的记录。在古埃及就已经知道亚麻线可用于外科手术的缝合来封闭病人的伤口。在最近的60年内由于纤维纺纱技术的进步 ,有了合成聚合物 ,纺织物用于人体的各种用途聚增。这只是仿生学革命的一部分 ,新的生物材料和生态纺织品被生产并用于修补和替代有疾病的、受伤的组织和器官。2　定义英国利物浦大学教授Ｄ .Ｆ .Ｗｉｌｌｉａｍｓ提出了“生物材料”这一新概念。最近纺织结构产品用作人体移植品的用途越来越多。生物纺织物的定义如下 :由纺织纤维组成的结构设计用于特殊的生态环境 (例如外…     

An innovative semianalytical technique for ceramic evaluation at microwave frequencies

We have developed an innovative semianalytical technique for various substrate material characterization. The developed technique is a measurement procedure and data-reduction formulation that takes into consideration the radiation loss in a resonant structure, allowing for a more effective means of dielectric- and conductor-loss determination for a microstrip ring resonator and its substrate material. We separate dielectric and conductor loss precisely, evaluate the contribution of each term in the overall loss performance, and analytically predict the error in their respective predicted value.     

On compressible subsonic flow between impeller and casing of radial-flow compressors with superposed throughflow

Summary Subject of this paper is the numerical investigation of the flow between impeller and casing of compressors of radial construction. The solution procedure is based on implicite difference equations, in which parameters of material such as heat conductivity, viscosity and density are variable. Because of the assumption of low density, laminar flow conditions are assumed. The computation method makes possible the determination of the torque coefficient as a function of Reynolds-and Mach number as well as of geometry and superposed throughflow.With 3 Figures     

INHIBITION OF BOTULINUM TOXIN PRODUCTION BY PEDIOCOCCUS ACIDILACTICI IN TEMPERATURE ABUSED REFRIGERATED FOODS

The "Wisconsin process'(a combination of lactic acid starter culture and sucrose) has previously been shown to be effective in preventing botulinum toxigenesis in reduced nitrite bacon. This technology has been applied to other low-acid refrigerated foods which receive less than a 12D thermal process. A combination of Pediococcus acidilactici and dextrose was effective in preventing botulinum toxigenesis in chicken salad. When the chicken salad was temperature abused, the P. acidilactici catabolized available dextrose to lactic acid. Extracellular accumulation of the lactic acid caused a decrease in the pH of the product. Pathogen challenge tests verified that the rate and extent of lactic acid accumulation in the chicken salad during temperature abuse was sufficient to preclude botulinum toxigenesis. This technology has the potential to be of use in a variety of low-acid refrigerated foods.     

Whitening of sidelobe powers by pattern switching in radar array antenna

Presented here is a concept for nearly eliminating bias errors in reflectivity and velocity estimates due to power received through antenna sidelobes of pulse Doppler radars. The antenna pattern is switched from pulse to paise among specially designed patterns, with near identical main lobes, but with sidelobes having randomly distributed phases and amplitudes. The sidelobe signal then becomes incoherent without affecting the coherency of the main lobe signal. The whitened sidelobe signal does not bias the mean velocity estimate computed by Doppler processing, and an unbiased estimate of reflectivity can be computed with the knowledge of the mean whitened power level. Pattern design criteria and a method for the design of optimum patterns are developed for a linear array. The extent of sidelobe reduction by way of whitening has been studied in detail for special case of only two patterns switched randomly using a pseudonoise sequence. Pattern switching realizes an effectively low sidelobe pattern without sacrifice of main lobe resolution. A possible extension to two-dimensional arrays is suggested.