Printed antennas with variable conductive ink layer thickness

One of the complex tasks in mass production of RF electronics is printing the communication antenna using electrically conductive ink. For example, this is very common for radio- frequency identification (RFID) tags. Electrical properties of the ink are mostly determined by conductive (e.g. silver) particles mixed into the ink solution and the way they `connect' in the cured ink. It is also desirable to minimise the amount of ink used per antenna, because high-conducting metals like silver used in the ink are rather expensive. Metal-based inks have limited conductivity, so the thicker the cured ink layer will be the better the antenna radiation efficiency can be achieved, but also the higher will be the costs. In the paper, the authors report on the investigations of the possibility of minimising the amount of ink used per antenna. This can be achieved by printing thicker ink layers, where antenna structures are known to have high current density. Two common antenna structures and a dedicated antenna for passive RFID are used in the investigation. The main result of the paper is that radiation efficiency depends primarily on the total amount of ink used for printing the antenna, rather than on the variations of the layer thickness within the antenna structure     

Radar Interferometric Measurements With a Planar Patch Antenna Array

A planar patch antenna array has been made for radar interferometry. The antenna array consists of 32 rectangular patches on a ceramic loaded teflon substrate. The patches are individually coupled to the microwave electronics in two orthogonal circular polarizations. The radar interferometer is intended for topographic imaging in industrial environment, in this case, a blast furnace producing hot metal for the steel and metal industry. Ordinary imaging techniques with IR or visible radiation are not possible to use due to high temperatures, scattering from dust and particles. A model of blast furnace burden material surface was measured and detected.     

Influence of oxidized polyethylene wax (OPW) on the mechanical,thermal, morphological and biodegradation properties of PHB/LDPE blends

Blends of poly(β-hydroxybutyrate) (PHB) and low density polyethylene (LDPE) were prepared in proportions of 100/0, 75/25, 50/50, 27/75 and 0/100 (PHB/LDPE wt.%), with and without oxidized polyethylene wax (OPW, 5 wt.%), and the mechanical, thermal (differential scanning calorimetry and melting flow index, morphological (scanning electron microscopy) and biodegradation (aging in simulated soil) properties were evaluated. The addition of OPW increased the tensile strength and Young’s modulus but decreased the elongation at break of the blends. Similarly, OPW increased the T _g of the pure LDPE and enhanced the melt flow index. Scanning electron microscopy showed that OPW reduced the phase separation of LDPE and increased the biodegradation during aging in simulated soil.     

The EuQoS system: a solution for QoS routing in heterogeneous networks [Quality of Service based Routing Algorithms for Heterogeneous Networks]

EuQoS is the acronym for "end-to-end quality of service support over heterogeneous networks", which is a European research project aimed at building an entire QoS framework, addressing all the relevant network layers, protocols, and technologies. This framework, which includes the most common access networks (xDSL, UMTS, WiFi, and LAN) is being prototyped and tested in a multidomain scenario throughout Europe, composing what we call the EuQoS system. In this article we present the novel QoS routing mechanisms that are being developed and evaluated in the framework of this project. The preliminary performance results validate the design choices of the EuQoS system, and confirm the potential impact this project is likely to have in the near future     

On the Estimation of Differential Entropy From Data Located on Embedded Manifolds

Estimation of the differential entropy from observations of a random variable is of great importance for a wide range of signal processing applications such as source coding, pattern recognition, hypothesis testing, and blind source separation. In this paper, we present a method for estimation of the Shannon differential entropy that accounts for embedded manifolds. The method is based on high-rate quantization theory and forms an extension of the classical nearest-neighbor entropy estimator. The estimator is consistent in the mean square sense and an upper bound on the rate of convergence of the estimator is given. Because of the close connection between compression and Shannon entropy, the proposed method has an advantage over methods estimating the Renyi entropy. Through experiments on uniformly distributed data on known manifolds and real-world speech data we show the accuracy and usefulness of our proposed method.     

The influence of hydrogen and nitrogen on the formation of Si nanoclusters embedded in sub-stoichiometric silicon oxide layers

This work reports the study concerning the influence of the preparation conditions on the structure of silicon rich oxide (SRO) deposited by PECVD method by which the structural properties of the film are strictly related. In particular we investigated the role of reactant gases N₂O and SiH₄ on the total Si concentration, Si excess concentration, Si clustered concentration and size of nanoclusters formed by high annealing temperature. We payed particular attention on the role of the hydrogen and nitrogen during the Si agglomeration.The presence of hydrogen atoms on the as-deposited specimen, confirmed by the Si–H bonds peak on the FTIR analysis, has been directly correlated to the silicon excess concentration in the layer. The silicon, oxygen and nitrogen atomic density has been calculated from RBS analysis. These information were coupled to the ones obtained using methodology based on electron energy loss spectroscopy combined with energy filtered images, which allowed us to quantify the clustered silicon concentration in annealed sub-stoichiometric silicon oxide layers (SiO_x). We have verified that the nitrogen dissolved in the layer inhibits the Si excess clustering so that the efficiency of silicon agglomeration process decreases as the nitrogen content increases.     

Proteins from extremophiles as stable tools for advanced biotechnological applications of high social interest

Extremophiles are micro-organisms adapted to survive in ecological niches defined as 'extreme' for humans and characterized by the presence of adverse environmental conditions, such as high or low temperatures, extreme values of pH, high salt concentrations or high pressure. Biomolecules isolated from extremophiles possess extraordinary properties and, in particular, proteins isolated from extremophiles represent unique biomolecules that function under severe conditions, comparable to those prevailing in various industrial processes. In this article, we will review some examples of recent applications of thermophilic proteins for the development of a new class of fluorescence non-consuming substrate biosensors for monitoring the levels of two analytes of high social interest, such as glucose and sodium.     

Comparative robustness study of planar antennas

Is it possible to produce a planar dipole-like antenna with a reduced conductive area without any loss in either robustness or performance? The objective is to reduce the amount of expensive conductor to be used when applying a meshing technique to the printing of antennas. In this context, robustness means that the characteristics are maintained when the antenna is damaged, for example if it is scratched. This is particularly important for radio frequency identification tags in logistic systems. A general antenna robustness evaluation methodology, based on numerical simulations of a large number of randomly damaged antennas, is used for the antenna comparisons. The antenna performance degradation, based on the return loss (S₁₁) at 868 MHz, is monitored for some basic planar antennas. Finally, we show that it is possible to produce robust low-cost antennas using wire replacements for the solid planar antennas and thus, provided that the robustness requirement is moderate, replace the solid antenna with a thin conductor analogue